Dual Tech Occupancy Sensor 100 -347 VAC, center mount 360°
DT-355
Wattstopper
Bazaarvoice SAP Hybris Integration Version 2.8.1
Wattstopper’s low profile DT-355 dual technology occupancy sensor combines the benefits of passive infrared (PIR) and ultrasonic technologies. The sensor mounts on the ceiling with a flat, unobtrusive appearance and provides 360 degrees of coverage.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Specifications
General Info
Product Line | Wattstopper | ||
UPC Number | 754182913848 | ||
Country Of Origin | China | ||
Features | Indicator Lights, IR (Infrared), Motion Sensor | ||
Application Sector | Commercial | ||
Warranty Type | 5-Year |
Dimensions
Product Width US | 4.0 in | ||
Product Weight US | 0.45 lb | ||
Product Volume US | 71.25 cu in | ||
Product Depth US | 5.0 in | ||
Product Height US | 3.0 in |
Additional Information
RoHS Conformant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. | |
DesignLights Consortium Qualified System | Yes | ||
Security | Yes | This product is ioXt certified | |
Product Environmental Profile | Yes |
Technical Information
Sensor Type | Occupancy | ||
Indicator | LED Light | ||
Wattage | 800 W | ||
Sensing Range | 360 degrees,1000 sq ft | ||
Voltage | 100 to 347 V | ||
Connection Type | Wired |
Resources
CAD Drawings
57-039-9 - CI,DT,UT-300 Sensor Mounting Details
dxf
57-039-9 - CI,DT,UT-300 Sensor Mounting Details
dwg
57-039-9 - CI,DT,UT-300 Sensor Mounting Details
png
57-039-9 - CI,DT,UT-300 Sensor Mounting Details
pdf
57-301 - DT-355 Standard Schematic
pdf
57-301 - DT-355 Standard Schematic
png
57-301 - DT-355 Standard Schematic
dxf
57-301 - DT-355 Standard Schematic
dwg
57-303 - CI, DT, UT-305 Standard Schematic
png
57-303 - CI, DT, UT-305 Standard Schematic
pdf
57-303 - CI, DT, UT-305 Standard Schematic
dxf
57-303 - CI, DT, UT-305 Standard Schematic
dwg
DT-355
dxf
DT-355
png
DT-355
dwg
DT-355cp - DT-355 Coverage Pattern
png
DT-355cp - DT-355 Coverage Pattern
dxf
DT-355cp - DT-355 Coverage Pattern
dwg
View More
Installation Instructions
Product Environmental Profile
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
One of the answers to a question asked previously was that a DT-355 Line voltage sensor could be combined with a Radiant 0-10V dimmer on the load side. Is this correct? I am about to order this combination of devices and I want to make sure.
Hello John,
Yes, you can utilize a radiant 0-10v dimmer on the load side of the DT-355 sensor. Please feel free to give us a call if you would like to discuss this configuration further.
legrand Contact information:
Phone #: 844-957-3783 - Option 1, followed by option 2 for Technical Support.
Monday - Friday | 8:00am - 6:00pm Eastern Standard Time (excluding holidays)
Best Regards,
Technical Support
Date published: 2022-10-25
Can a dimmer switch be incorporated with the occupancy sensor to dim the lights when needed?
Yes, a line voltage switch/dimmer can be added to the load side of the DT-355.
Date published: 2022-10-11
Do you have a sensor rated to 0F ?
The CB-100 is a PIR only sensor, which can operated -40 to 95F.
Please view attached SPEC sheet
Date published: 2022-10-11
What is the maximum distance the occupancy sensor can be from the ground for it to work properly
The DT-355 is designed for a ceiling heights of about 8-12 feet from the floor.
Date published: 2022-10-11
Does this sensor cover minor motion? If so, what are the distances for that?
The DT-355 is a Dual-Technology sensor that has both PIR and Ultrasonic technology built in . The sensor is able to detect major and minor motion up to 1000 sqft when mounted below 10'.
Date published: 2022-02-02
We have these thru out our warehouse, but would like the one by the entry door to stay on, is that possible?
To override all sensor functions on the DT-355, set the Ultrasonic Sensitivity trimpot to the fully counterclockwise (Service) position.
This bypasses the occupancy control functions of the sensor.
Date published: 2022-01-12
Hello, is the DT-355 sensor rated for exhaust fans?
No, the DT-355 has no rating for motor loads. I suggest looking at our BZ power packs and a 24v low voltage sensor. BZ power packs are rated for motor loads.
Date published: 2023-06-08
Comparing with the other product Ultrasonic Ceiling Occupancy Sensor, 24VDC (W-500A), which sensors would be more suitable for a 150sq.m classroom? Comparing to its technologies, lifetime and price. Thank you.
Dual technology sensors are most commonly used in this application. They work using a combination of PIR and Ultrasonic technology. As individuals move throughout a given space, Ultrasonic wave analysis and the Doppler effect help detect indirect motion while passive infrared sensors monitor presence directly.
Date published: 2021-07-26
we are looking for an occupancy sensor that will fit in a single gang electrical box. do you offer one?
Good Afternoon,
Thank you for contacting Wattstopper. We offer several sensor switch options that will fit in a single gang electrical box. Please go to our website www.legrand.us and you can search Wall Switch Sensors. We do not have an option that is a sensor only. The correct device for your situation will depend on your application and if you want a line voltage or low voltage sensor. Please let us know if we can offer any further assistance.
Best Regards,
Wattstopper Technical Support
800-879-8585
Date published: 2021-07-20
Can you use two ceiling sensor in a large room ?
Yes, multiple ceiling sensors can be used to cover a large area.
Date published: 2022-12-06
Bazaarvoice SAP Hybris Integration Version 2.8.1