Search radiant
explore our collections

Single Pole/3-Way Switch & 15A Tamper-Resistant Outlet, Brown
Sorry! That combination does not exist.
General Info
Color: Brown
Type: Combination
Listing Agencies/Third Party Certifications
RoHS: Yes
cULus: Yes
UL Listing No: 20
UL Standard: Yes
UN SPSC: 39121704
Construction Information
Component 4: 78500705503
Depth (US): 1.43"
Height (US): 3.81"
Width (US): 1.29
Technical Information
Amps: 15A
NEMA Configuration Number: 5-15R
NEMA Rating: Yes
Volts: 120/125VAC
This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.
You Might Like
Tru-Universal Single Pole/3-Way Dimmer, Tri-Color
(3 Reviews)
120V Single Pole/3-Way Occupancy Sensor, Tri-Color
(3 Reviews)
4-Button Digital Timer, Black
(23 Reviews)
Night Light with Single-Pole, 3-Way Switch, Black
(8 Reviews)
  • bvseo_sdk, net_sdk,
  • CLOUD, getReviews, 16ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

How do you remove the split circuit tab? The switch doesn’t seem to match the picture shown in the instructions.

Asked by: Schayne
On the lower right of the device between the two black screws there is a small tab that you can pull out with a small pliers.
Answered by: Legrand Techincal Support
Date published: 2018-10-23

Do you sell 20 Amp switches and plugs for a kitchen that compliment the brushed nickel screwless wall plates

Asked by: Stanley 654
We do not make a 20A version of the RCD38TRNicc6 But You can put this on a 20A circuit
Answered by: Legrand Technical Support
Date published: 2018-08-16

Trying to wire 3 way legrand radiant switch where power and light fixture wires are at same switch and remaining switch only has 14-3 feeding it.  This is different than your example.  Can you send me the alternative diagram?  Thanks

Asked by: Dean
This is a way to make this work as long as the switch with the outlet is going on the hot end of the circuit where the hot/common is coming from the box. I have attached a diagram to illustrate how this would work. Basically the hot wire would attach to the hot terminal on the first switch where the 14/3 is running FROM. The red and black wires in the 14/3 would serve as travelers to the dead end three way switch that the 14/3 is running TO. Then the white wire could be marked with black tape and be used to run from the load on the dead end switch to load wire up to the light in the first box. These wires would pig tail together.
Answered by: Legrand Technical Support
Date published: 2019-07-11
  • y_2020, m_2, d_19, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.5
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_11
  • loc_en_US, sid_RCD38TR, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_legrand
  • bvseo_sdk, net_sdk,
  • CLOUD, getReviews, 78ms
  • bvseo-msg: The getReviews method is only supported when is configured for structured markup. Please submit a support ticket at to have your Bazaarvoice configuration updated to use for structured markup.;

Chat Is Currently Offline

Leave a message here to request a call back from our customer support team.