Menu
Search
Menu

Classroom - CA Title 24 (2016) Compliant

Space ≥100Ft2, Bldg <10,000Ft2
Dimming with Analog Product

Classroom Stand-Alone Solution Reflected Ceiling Diagram

Bill Of Materials

Quantity

Part Number

Description

2

BZ-150 Power Pack

2

DT-305 Ceiling Mount Dual Tech Occupancy Sensor

1

DCLV2

Low Voltage, 0-10V Dimming Wall Switch

1

LVSW-101

1-Button Wall Switch

Quantity

:

2

Part Number: BZ-150

Description

:
Power Pack

Quantity

:

2

Part Number: DT-305

Description

:
Ceiling Mount Dual Tech Occupancy Sensor

Quantity

:

1

Part Number: DCLV2

Description

:

Low Voltage, 0-10V Dimming Wall Switch

Quantity

:

1

Part Number: LVSW-101

Description

:

1-Button Wall Switch

Code Requirements

Code

Description

130.1(a)1-3

Area Controls

130.1(a)4

Separately Controlled Lighting

130.1(b)

Multi-Level Controls and Uniformity

130.1(c)5

Occupancy Sensor Shut-Off Controls

Code

:

130.1(a)1-3

Description

:
Area Controls

Code

:

130.1(a)4

Description

:
Separately Controlled Lighting

Code

:

130.1(b)

Description

:
Multi-Level Controls and Uniformity

Code

:

130.1(c)5

Description

:
Occupancy Sensor Shut-Off Controls

Sequence of Operation

  1. Manual On/Off and multi-level control of general lighting (a) with wall switch.
  2. Manual control On/Off white board lighting (b) with wall switch.
  3. Auto off all lighting within 20 minutes of occupants leaving.

Design Considerations

  1. When lighting power in the primary sidelight area is 120 W or greater, it must have automatic daylight responsive controls installed for all general lighting in that area.
  2. Although not required by code (Title 24 130.5(d)), automatic receptacle can be designed with either an RF transmitter with receptacle RF receivers, or can be hardwired to receptacles using a receptacle rated Power Pack.
  3. Time scheduling, demand response and remote programming/diagnostic functions are available using Wattstopper Digital Lighting Management networked products.
  4. To integrate occupancy detection control with the HVAC system, use a DT-300 occupancy sensor with isolated relay.