CordMate III Cord Management Kit - White
C310
Wiremold
Bazaarvoice SAP Hybris Integration Version 2.8.1
CordMate III High Capacity Cord Cover Kit is perfect for hiding larger bundles of home entertainment cabling, speaker wires, TV/video cabling and home office wiring. Peel and press backing makes for easy installation. Hinged lid allows easy access to cables. Stylish design complements any interior setting. White/ Paintable.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Ideal for concealing multiple low-voltage cords, wires and cables
- Suitable for covering home entertainment wires, speaker cables, TV/video cabling and home office wiring
- Paintable with latex-based paint
- Large capacity
- 2 flat elbows, 1 inside elbow, 1 outside elbow, 2 coupling/exit fittings and 1 ''T'' fitting included
Specifications
General Info
Product Line | Wiremold | ||
Color | White | ||
UPC Number | 086698001697 | ||
Country Of Origin | United States | ||
Application Sector | Residential | ||
Standard | Raceway is not NRTL Listed and is only designed for use in protecting electrical cords and low voltage wiring and cabling. | ||
Type | Raceway |
Additional Information
RoHS Conformant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. |
Buy American Act Compliance
NAFTA | Yes |
Resources
Cutsheet
Installation Instructions
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Have temp romax run in garage fr brkr box to plug (repl non wrkg in wall). Want to avoid mtl conduit. I purchased Cordmate iiiC35. Why can't it be used to extend permanent hardwired lines ? We'd use typ Romex.
Hello,
The C310 is a cord cover only, it is not UL tested or rated for power wiring. Please give us a call for alternative options for your application. Wiremold Technical Support can be reached at 844-957-3783, option 2 for Wiremold and 2 for Technical Support.
Thank you,
Date published: 2023-02-07
Is there a drop ceiling fitting/cover that works with the 310? Something like Panduit SKU DCF5IW-X?
Hi,
Part number is 2986-WH.
Thanks,
Date published: 2023-01-24
What boxes are to be used with the Cordmate 3
Hi Jeff,
The Cordmate III uses the NM2048 or NM2044 device boxes. They are also available in 2-gang options. The link below will provide the full spec sheet with compatible parts. The Cordmate III is the same as our 2900-WH series.
https://legrand.webdamdb.com/directdownload.php?ti=55654545&tok=NtS7RomkuRIlmrK2hmuWzwRR
Thank you,
Date published: 2023-02-03
Can i buy an outside corner for the chord mate iii? If so, can I buy it direct from you? I have searched Home Depot and Amazon and have not found one large enough to work!
Hello,
Yes, an outside elbow is available for Cordmate III. Our part# is 2918FO-WH.
See attached link and use the following steps to locate an authorized Legrand distributor.
To locate distributors in your area, please click on the link below, choose DISTRIBUTOR
from the drop-down menu under WHERE TO BUY, and WIREMOLD under BRAND NAME.
If your location is not automatically displayed in the search field, enter you zip code and click
on the magnifying glass (search). The page will then display a map and a listing of all the distributors near you.
https://www.legrand.us/where-to-buy/shop-local/?ps-sku=P001
Thank you!
Date published: 2022-10-14
What are the differences between cordmate ii and iii?
Hello,
The Cordmate II is a smaller profile, 1" x 1/2". The Cordmate III is 1 1/2" x 3/4".
Thank you
Date published: 2023-11-09
Is there an end cap for the cordmate 3 series?
Hi Joey,
The blank end fitting is part number 2910B-WH.
Thank you,
Date published: 2022-04-21
Are 45 degree elbows available for the flat and the inside corner?
Hi Pat,
We offer standard 90° fittings for the Cordmate III system. Since it is a low voltage cord cover other angles can be cut on site to achieve the desired angle without voiding any UL listing.
Date published: 2022-03-29
Where can I buy on line just the individual Cordmate III flat elbows. Need 10 of them. All I can find is the accessory packs where I will just throw away many other pieces
Hello Gloria,
Thank you for your inquiry. 2911-WH is the individual part# for the Cordmate III flat elbow. This elbow can be purchased through an electrical distributor in your area.
See attached link and use the following steps to locate an authorized Legrand distributor.
To locate distributors in your area, please click on the link below, choose DISTRIBUTOR
from the drop-down menu under WHERE TO BUY, and WIREMOLD under BRAND NAME.
If your location is not automatically displayed in the search field, enter you zip code and click
on the magnifying glass (search). The page will then display a map and a listing of all the distributors near you.
https://www.legrand.us/where-to-buy/shop-local/?ps-sku=P001
Feel free to contact us direct with any additional questions. We can be reached at 1-844-957-3783. From the main menu choose option 2 for Wiremold followed by option 2 for Technical Support.
Thank you for your interest in Legrand products.
Date published: 2021-12-02
Is there an ivory or beige version of this?
Hello Cabby,
Yes, there is an ivory version which is part of the 2900 family. 2900 is a 6ft length in ivory. It's also available in an 8ft length (part# 2900L8). Other parts are available separately.
Please reference the attached link to the cutsheet from our website.
https://legrand.webdamdb.com/directdownload.php?ti=55654545&tok=NtS7RomkuRIlmrK2hmuWzwRR
Feel free to call us direct with any additional questions. We can be reached at 1-844-957-3783. From the main menu choose option 2 for Wiremold followed by option 2 for Technical Support.
Thank you for your interest in our product.
Date published: 2021-11-29
Are there extra tees and elbows available?
Hello John M,
Yes, tees and elbows are available as separate catalog items. Tee part# is 2915FO-WH and depending on which elbow is required we offer a flat 90, inside 90 and outside 90 as options. Part numbers for each are 2911FO-WH (flat 90), 2917FO-WH (inside 90) and 2918FO-WH (outside 90).
For additional product questions please feel free to reach out to us direct at 1-844-957-3783. From the main menu choose option 2 for Wiremold followed by option 2 for Technical Support.
Thank you for choosing Legrand!
Date published: 2021-12-02
Bazaarvoice SAP Hybris Integration Version 2.8.1