Wiremold 5400 Series Two Compartment Raceway Base, Ivory

Hello, For lead time requests on standard products please email our customer support team directly at customer.support-wm@legrand.us. The 5400 series has multiple parts and they will need to have specific parts numbers to advise availability. I have provided a link below for the full parts listing. 5400 series cut sheet: https://legrand.webdamdb.com/directdownload.php?ti=55653929&tok=rtkFXlyMIAsyjcjViEVHtgRR For the 30TC-4WH pole, it is a blank pole and will require qty (5) 30TP-BWH add-on plates for field installation of the duplex receptacles. For factory pre-wired poles with that configuration it would be a custom product. For help with custom products you will need to contact our local Legrand rep. Below are the steps for finding the best point of contact in your area: Click on this link: https://www.legrand.us/where-to-buy select “shop local or find a sales rep” Under where to buy select “sales rep” Under brand name select “Wiremold” Under who are you, select which category best describes you Enter search (magnifying glass), below the map you’ll see the local rep in your area.

Hello, Our raceway systems are covered under article and 386 of the NEC. They are all designed for interior dry locations, not subject to corrosive vapors. A pool area will most likely be deemed a damp or wet location. The installation can only be approved by the Authority Having Jurisdiction (AHJ). The AHJ will need to determine if the installation complies with any and all national and local code requirements. Thank you,

Hello David, The size of our 5400 nonmetallic raceway measures 5-1/4" wide x 1-3/4" deep. We offer several smaller sizes. There's also a larger size (5500 series) which measures 6-11/16" x 1-3/4". For assistance with product selection please call us direct at 1-844-957-3783. From the main menu select option 2 for Wiremold followed by option 2 for Technical Support. Thank you!

Yes, the 5400 series is available in ivory or white. Thank you

Hello Steve R, We do have some .dxf files for some of these parts. Please call us direct so we can gather info for the parts you need these files for. We can be reached direct at 1-844-957-3783. From the main menu choose option 2 for Wiremold followed by option 2 for Technical Support. Thank you for your interest in our products.