radiant® 0-10V LED/Fluorescent Dimmer, Tri-Color
RH4FBL3PTCCCV6
radiant Collection
radiant 0-10V LED/Fluorescent Dimmer is rated
out of
5 by
4.
Bazaarvoice SAP Hybris Integration Version 2.8.1
$74.83 USD
Upgrade your space with precise dimming control and exceptional style. The radiant® 0-10V Dimmer works with low-voltage fluorescent and LED fixtures, allowing you to set the perfect light level for your space with efficiency and ease. Part of the radiant® Collection, it also features clean lines and smooth control for a sophisticated touch.
Made exclusively for use with screwless Wall Plates from the radiant® Collection, sold separately.
Quantity
In Stock
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Replaces any basic switch or dimmer with ease, in both single-pole and 3-way applications. For use with 0-10V, 4-wire, 120V 10A/277V 5A LED and fluorescent lighting.
- Low-profile paddle switch offers smoother On/Off control, while a separate, ergonomic slider allows you to adjust light levels with precision.
- Locator light illuminates when switch is off, emitting a soft glow to help you find it in the dark.
- Constant memory features returns lights to their previous level after a power failure or outage.
- No derating* required for 2-gang applications. *Reducing the maximum wattage a dimmer can handle. This is sometimes required for multi-gang applications.
- Features durable, high-impact resistant thermoplastic construction.
- More color options available to fit any style, including finishes to match current hardware and lighting trends.
- Complete the look with a sleek, screwless radiant® Wall Plate, and coordinate with other designer switches and outlets available from the radiant® Collection.
Specifications
General Info
Product Line | Pass & Seymour | ||
Color | Ivory, Light Almond, White | ||
Country Of Origin | China | ||
Switch Type | Paddle | ||
Number of Switches | 1 | ||
Warranty Type | Limited Lifetime Warranty |
Dimensions
Product Width US | 1.75 in | ||
Product Depth US | 1.25 in | ||
Product Height US | 4.25 in |
Technical Information
Number of Gangs | 1 | ||
Amperage | 15 A | ||
Bulb Compatibility | Fluorescent, LED | ||
Number of Poles | 3-Way, Single Pole | ||
Mounting Type | Box | ||
Voltage | 0 to 10 V |
Resources
Supporting Document
Sell Sheet
Brochure
Cutsheet
Installation Instructions
Premium Content
Reviews
Rated 5 out of
5
by
OldEngineer from
This is a great dimmer at a good price
I just purchased and installed this 0-10v dimmer for a light my wife wanted that was only dimmable via 0-10v dimming.
The best feature of this dimmer is that the "Constant memory returns lights to previous level after a power failure". It is very easy to connect and comes with covers for two additional covers in addition to the white. I bought it at a local electrical supply house and it was very cost effective compared to buying one online. I hope it is reliable, it will get a lot of use.
Curiously Legrand products did not show up in internet searches for 0-10v dimmers.
Date published: 2019-02-07
Rated 5 out of
5
by
Rachel from
Great!
Works great, I had to call customer service twice during install and they were super helpful. Very happy with this product!
Date published: 2023-06-09
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Not an electrician. I believe I have two of these switches in my kitchen connected to 7 ceiling lights and I'm getting some flicker through out the dimming range. Any thoughts?
I would verify the model number of the dimmers by removing the wallplate. If it is the RH4FBL3P, it has a calibration wheel on the left side to adjust for flickering(see attached image). Also, you mention two dimmers controlling 7 ceiling lights so make sure that you are NOT using two dimmers in a 3way. It can only be one dimmer and a 3way switch.
Radiant products
1.844.957-3783
Mon - Fri: 8am - 6pm EST
(excluding holidays)
Email Us - tech.support@legrand.us
Date published: 2023-07-17
I've read mixed reviews about compatibility between dimmers and certain LED drivers. I have two Halo 8" LCR fixtures (Model # LCR8509FSE010MW) and would like to match the existing Legrand switches I have. Is this dimmer compatible with this fixture?
It should work. The dimmer is a 0-10V dimmer and the lights are 0-10V dimming as well.
Date published: 2022-01-08
Will this work with Halo RLDM 4” (#IB518292ML) integrated LED recessed lights?
No, the correct model number is the RH703PTUTC universal dimmer for that type of recessed LED lights..
Date published: 2021-10-18
Is there any PWM going on inside of this dimmer? I have a Meanwell 24V power supply that does not work with your product. This power supply can accept standard 0-10V signals as well as 10V PWM signals, dimming based on duty cycle.
No, it does not have PWM on the 0 - 10 volt signal for the RH4FBL3PW dimmer.
Date published: 2021-05-03
Hello - What is the maxiumum LED wattage that the 0-10v dimmer can control I have 43 x 36W LED 0-10v dimmable linear fittings I want to contyrol them all at once What do I need?
For a 0-10V dimmed fixture, the total number of fixtures per dimmer is based on the current sinking capacity of the dimmer and the current sourcing value from the drivers. i.e. a driver sourcing 100ua and an RH4 dimmer capable of sinking 30mA would give the capability to run approx 300 drivers, not dependent on the individual wattage of the driver.
Date published: 2022-08-10
In a commercial application, would the electronics within the switch be damaged if the lighting branch circuit is routed through a contactor for automatic shut off controls? This has been an issue with power packs in a similar set up.
Hello, thank you for the question. This device can be safely used with a switch contactor. I hope this helps.
Date published: 2021-04-13
Can multiple dimmers be used to dim the same group of lights as in a 3-way or 4-way setup? If not, are there companion dimmers to allow for this application or is this not possible with this product? Thanks.
The RH4FBL3P dimmer would need to be used with a standard 3way switch and you can only dim from the one location.
Typically, you would need a master dimmer and remote dimmer for that type of application and we do not have them for 0-10V drivers.
Date published: 2021-05-05
CAN THIS HANDLE #3 PATRIOTLIGHTINA 2X2 LED FLAT PANELS 1 SWITCH
If the panels are run by a 0-10V dimming ballast/driver this dimmer will work.
Date published: 2020-11-21
I purchased the RNCL453PTCCCV6 dimmer from Lowes. It does not dim our shutoff the Innovation Lighting BB-60-LED-ST64 bulb. The dimmer packaging does not state anything about 3.5 watt bulbs or 0-10V incompatibility.
This dimmer is compatible with CFL/LED dimmable bulbs (except 0-10V LED drivers) and has a 10W minimum load required.
If you have 0-10V fixture, you would need to use the RH4FBL3PTC(4 wire) dimmer.
Date published: 2020-04-03
Can the switch be used to dim only 3 of 5 lights installed on the switch?
These are generally all on one 0-10V driver/ballast, so they would all be dimmed the same.
Date published: 2020-03-26
For a single pole installation, does the switch require 4 wires from the switch to the fixture? I only have a 3 wire in the wall from the switch location to the fixture.
The Radiant 0-10V dimmer is designed for use with a "4 wire" dimming ballast only.
Date published: 2020-03-11
I have a RH4FBL3PTCCCV6 dimmer and a Lithonia led troffer light MVOLT 120-277v how to iI wire this
If the Lithonia led troffer light MVOLT is a 0-10V(4 wire) fixture, then follow the wiring instructions on the attached link for installing the Radiant dimmer.
https://www.legrand.us/-/media/brands/radiant/resources/installation-instructions/radiant%20flourescent_led%20dimmers-10a.ashx
If the Lithonia led troffer light MVOLT LED driver does not have Grey and Purple low voltage wires, then you would need a different dimmer for it(most likely the RH703PTUTC).
Date published: 2019-10-25
Will the dimmer dim all the way down to darkness?
This is a 0-10v Dimmer. Dimming results will be vary depending on the dimming ballast and lighting fixture. Our 0-10V dimmer is designed to dim the full range of the Lights
Date published: 2020-01-01
Does it require a screwless switch plate?
Good Morning,
This dimmer will work with any wallplate that has a decorator style opening on it. It doesn't have to be one of our screwless ones.
Hope this helps!
Date published: 2019-04-10
Can you tell me where the RH4FBL3PW is manufactured please.
This item is manufactured in China.
Date published: 2019-04-05
How many dimmers I would require for these LED Luminaires if I will use Radiant wattstopper? LED Down Light Recessed Mounted IP20 with Warm White Color 3000K 40W, 4515 Lumens, Life Time 50,000 Hrs .Dimmable with 0-10V FOSNOVA-Italy ( Disano Group )
• A maximum of 30 ballasts can be connected to a single
dimmer control.
• This dimmer is compatible with UL Listed 120VAC or
277VAC rated, 0-10V dimmable ballasts. For example,
Advance transformer Mark 7™ or Osram Sylvania
Quicktronic Helios.
Date published: 2018-09-06
does this require 120v at the switch to operate, or will it run on the 10v passing through?
Thank you for your question regarding the Radiant 0-10V dimmer(Model # RH4FBL3PW).
This dimmer does require 120V at the dimmer to function on/off. The dimming is controlled through the low voltage wires(grey/purple).
Radiant products
1.800.223-4162 opt 3
Mon - Fri: 8am - 8pm EST
(excluding holidays)
Date published: 2022-10-02
how many watts is this rated for on the 0-10v side? not specified anywhere
Good Morning,
0-10V dimmers are typically not rated by wattage. They are rated by Amperage. They can handle 10A max at 120VAC or 5A max at 277VAC.
Hope this helps!
Date published: 2021-08-13
Do I need a ballast/driver for the dimmer to work?
Yes this dimmer is a 0-10V dimmer. It is designed for 0-10V ballasts/drivers.
If you do not have a 0-10V ballast this is not the dimmer You want.
I would reccomend our RH703PTU it is our Tru universal dimmer designed for a wide variety of light loads.
Date published: 2018-06-21
how do i wire a pilot and radiant ?
To provide correct wiring information we would need the model numbers for both devices. I would suggest calling in and speaking with Technical Support for installation assistance.
We can be reached at:
adorne products
1.800.223.4185 opt 3
Mon - Fri: 8am - 8pm EST
Date published: 2019-12-08
Bazaarvoice SAP Hybris Integration Version 2.8.1