text.skipToContent text.skipToNavigation
  1. Home
  2. Lighting Controls and Systems
  3. Digital Lighting Management
  4. Load Controllers

DLM PLUGLOAD CONTROLLER 20A METERED

LMPL-111-20M Wattstopper
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 24ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

The LMPL-111-20M Plug Load Controller contains a 20 amp relay for on/ off control of connected outlets, and a highefficiency intelligent switching power supply. This plug load controller works as part of the Wattstopper Digital Lighting Management (DLM) system and enables energy-efficient control of plug loads.
Application Sector Commercial
  • Commercial
Buy American Act Compliance Yes
Where To Buy
  • Send
  • Save as PDF
  • Add to favorites Remove from favorites
Features

Features

  • Plenum-rated controller with line voltage relay and intelligent switching power supply
  • Knockout mounting for easy installation
  • Advanced real time metering of voltage and current (+/- 2% accuracy)
  • Plug n’ Go™ automatic configuration for quick installation and maximum energy efficiency
  • Accepts occupancy sensor signal or schedule events for energy saving control of plug load
  • Plugs to other components using Cat 5e cable and RJ45 connectors eliminating wiring errors
Specifications

Specifications

General Info
Product Line Wattstopper
UPC Number 754182944200
Country Of Origin China
Dimensions
Product Width US 5.0 in
Product Weight US 1.06 lb
Product Volume US 89.25 cu in
Product Depth US 5.0 in
Product Height US 3.5 in
Additional Information
RoHS Conformant Yes This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.
DesignLights Consortium Qualified System Yes
Security   Yes This product is ioXt certified
Resources
Reviews

Reviews

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 3ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Questions & Answers

Questions & Answers

If black w/ white stripe and regular black are tied together, will this still work? In a case where the avaliable box in a room doesn't have the receptacle "home run", just the constant hot and switch leg,

Asked by: Dave
The black/white wire allows the device to monitor power use of unswitched receptacles (red is switched, black/white is unswitched, but both are metered). Connections to the LMPL should only be made as shown in the installation instructions (ie black/white is an output to receptacles, not an input from line). Receptacles can be ran directly from line feed hot/neutral without connecting to LMPL in the requested manner. This will not allow the LMPL to meter them however, as they would no longer be connected through it.
Answered by: Justin
Date published: 2024-05-14

What os the purpose of wiring unswitched receptacle to the Black with white stripe? 

Asked by: Jim
Hi Jim, The black with white stripe wire is the load wire for the non-switched receptacles. The red wire is the load for the switched receptacle.
Answered by: Tier 1 Tech Support
Date published: 2023-06-29

Can a switch control the LMPL-111 instead of an occupancy sensor or scheduled event?

Asked by: JM
Hi JM Yes, the loads can be assigned to DLM switches.
Answered by: Tier 1 Tech Support
Date published: 2023-03-17
  • y_2024, m_5, d_18, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_LMPL-111-20M, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_legrand
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 30ms
  • QUESTIONS, PRODUCT
Back to Top