text.skipToContent text.skipToNavigation

Digit V.3 Triple Relay Rm Controller, On/Off/ 0-10v dimmer

LMRC-210 Series Digital Room Controllers include one, two or three relay(s) to switch a total of 15 or 20 amps, a highefficiency switching power supply and one 0-10 volt output per relay for control of dimmable loads including electronic ballasts (Advance Mark 7, or equivalent). They are the foundation of a Wattstopper Digital Lighting Management (DLM) system, and allow integration of occupancy sensors, daylighting controls and switches for energy-efficient lighting control.

BAA No

Number of Connectors 3

Voltage 120/277 VAC

120/277 VAC
347 VAC

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

Plenum-rated controllers with line voltage relay(s) and 0-10 volt dimming output(s)
120/230/240/277 volt and 347 volt models
Plug to other components using Cat 5e cables with RJ45 connectors eliminating wiring errors
Plug n’ Go automatic configuration for maximum energy efficiency
Store load preset level and 16 scene preset levels for each load
Support energy saving manual-on, bi-level, tri-level and dimming control strategies

Specifications

General Info

Product Line	Wattstopper
Color	White
UPC Number	754182929054
Country Of Origin	China
Product Series	LMRC
Installation Location	Ceiling
Application Sector	Commercial
Standard	UL 924, UL 60730, UL 2043, cUL, FCC part 15, PEP, RoHS 2011/65/EC, ISO 14025:2010, ISO 14001, ISO 14040:2006, ISO 14044:2006
Warranty Type	5-Year
Type	Room Controller

Dimensions

Product Width US	6.5 in
Product Weight US	1.4 lb
Product Volume US	226.0 cu in
Product Depth US	3.3 in
Product Height US	6.5 in

Additional Information

RoHS Compliant	Yes	This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.
DesignLights Consortium Qualified System	Yes
Security	Yes	This product is ioXt certified
Product Environmental Profile	Yes

Technical Information

Operating Temperature Min	32 °F
Output Voltage	24 VDC
Number of Connections	7
Dimming Compatibility	0-10 V
Operating Temperature Max	158 °F
Topology	Free Topology
Number of Relays	3
Connector Type	RJ45, Terminal Block
Input Voltage	120/230/240/277 VAC
Line Frequency	50 Hz, 60 Hz
Indoor/Outdoor	Indoor
Mounting Type	4 in Deep J-Box
Current Draw	20 A
Operating Temperature	0°-70°C, 32°-158°F
Operating Humidity	5-95% RH (Non-Condensing)

Resources

Can a DLM room controller be mounted inside an enclosure?

Asked by: Mick

While there are no foreseeable issues with placing the DLM room controller inside an enclosure, it is important to note that there are no specific provisions for installing the controller within an enclosure. Additionally, it is not recommended to install the equipment outside where it may be exposed to various environmental elements. Ensure that none of the controller's venting slots are obstructed to maintain proper airflow and functionality.

Answered by: Tier 1 Tech Support

Date published: 2024-09-30

can a dual relay dimming room controller control 2 different zones of lights on the same circuit, each with its own motion sensor and a dual button switch for both zones

Asked by: ctm001

Yes, the Wattstopper LMRC-212 can facilitate that functionality. To optimize its configuration, it is recommended to use either the LMCT-100-2 configuration tool or the desktop software LMCS in conjunction with the USB adapter LMCI-100. This will allow you to configure the devices to operate according to your specific requirements.

Answered by: Tier 1 Tech Support

Date published: 2024-09-30

I have a LRMC-211 power pack with LMSW101 LV switch and 5 LMDC100 motion sensors. Directions say the device defaults to auto-on when you have 1 motion, but defaults to manual on when you have multiple. How do you change this back to auto-on?

Asked by: Christian

To change the settings on your DLM system, including the auto-on feature, you'll need either the LMCT-100-2 handheld remote or a laptop with LMCS software and the LMCI-100 USB adapter. The setting you're referring to is a "Load Setting". You can adjust the "Operation" to "Auto" to ensure the lights turn on automatically when the motion sensors detect occupancy.

Answered by: Tier 1 Tech Support

Date published: 2024-09-16

Can room controllers be powered at 208V single phase? Meaning two hot wires with no neutral.

Asked by: Anonymous

The DLM room controller requires a single-phase power source with specific input voltages. For the LMRC-213 model, it can be powered by single-phase 120/230/240/277VAC at 50/60Hz. However, it does not directly support 208V single-phase (two hot wires with no neutral).

Answered by: Tier 1 Tech Support

Date published: 2024-09-16

I have one of LMRC 212 used to be turning Off automatically during night time base on the program but now its not working. I have now to turn off at the switch to make it work. The rest of the relay is working. Thank you

Asked by: Eliseo

Please contact Wattstopper Technical Support @ 800-879-8585 for troubleshooting assistance related to you specific issue.

Answered by: Justin

Date published: 2024-06-13

How many light fixtures with individual dimmable ballasts can the the LMRC-211 control at once?

Asked by: Tim

That answer depends on the draw of your fixtures. Here are the load specifications for the LMRC-21x series controllers: Maximum 20A combined load per Room Controller; each relay rated for: @ 120/277V, 20A ballast or incandescent, 16A E-ballast (per NEMA410),or 1Hp motor load; @ 347V, 15A ballast only

Answered by: Justin

Date published: 2024-04-18

Can you use a 3 way splitter (t tap) to connect 2 relay packs together with a device like a switch or a occ sensor. 

Asked by: Jc

Hi JC, You can connect multiple LMRC's together using any open port on a device. If no ports are available a good quality "T" tap can be used. Mostly all of our devices have more than one port on them.

Answered by: Tier 1 Tech Support

Date published: 2024-04-16

my LMRC-212 relay turns on some loads but not all of them,what is wrong

Asked by: dave

Please reach out to our tech. support team for further assistance troubleshooting this issue. Legrand Technical Support: Phone: 1 800-879-8585, Option 3 then Option 1 Mon - Fri: 7am - 7pm CST (excluding holidays)

Answered by: Tier 1 Tech Support

Date published: 2024-01-19

DLM Room Controller, 1 Relay, 0-10V Dimming Questions - page 2

Digit V.3 Triple Relay Rm Controller, On/Off/ 0-10v dimmer

Features

Specifications

Resources

Cutsheet

Installation Instructions

CAD Drawings

Brochure

BIM Models

Supporting Document

Product Environmental Profile

Customer CAD PDF

Software Downloads

White Papers & Tech Bulletins

Case Studies

Reviews

Questions & Answers

Can a DLM room controller be mounted inside an enclosure?

can a dual relay dimming room controller control 2 different zones of lights on the same circuit, each with its own motion sensor and a dual button switch for both zones

I have a LRMC-211 power pack with LMSW101 LV switch and 5 LMDC100 motion sensors. Directions say the device defaults to auto-on when you have 1 motion, but defaults to manual on when you have multiple. How do you change this back to auto-on?

Can room controllers be powered at 208V single phase? Meaning two hot wires with no neutral.

I have one of LMRC 212 used to be turning Off automatically during night time base on the program but now its not working. I have now to turn off at the switch to make it work. The rest of the relay is working. Thank you

How many light fixtures with individual dimmable ballasts can the the LMRC-211 control at once?

Can you use a 3 way splitter (t tap) to connect 2 relay packs together with a device like a switch or a occ sensor.&nbsp;

my LMRC-212 relay turns on some loads but not all of them,what is wrong

Can you use a 3 way splitter (t tap) to connect 2 relay packs together with a device like a switch or a occ sensor.