ModulinkTM 880MP Series Rectangular Plastic Floor Box
880MP
Wiremold
Bazaarvoice SAP Hybris Integration Version 2.8.1
The Modulink™ nonmetallic floor box provides power and communication services directly to the workstation or to any open space location. The Modulink™ Floor Box is a gangable box that allows a one-gang floor box to easily be turned into a two- or three-gang box simply by ganging together individual boxes. This floor box has many applications, some of which are commercial offices, retail stores, malls, financial and government institutions.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- TopGuard protection. Activation covers for the 880MP PVC box are TopGuard protected. These cover assemblies keep out water, dirt, and debris from the power and communication compartments.
- Multiple service capability. Eliminates the cost of a separate floor box and cover to accommodate communication service.
- Depth markings on exterior of the box. Makes floor box depth calculations quick and easy. Reduces installation time and labor costs.
- 1 1/4'' [32mm] conduit openings. Provides the largest conduit feed in the industry. Meets customer requirements for greater communication cable capacity.
- Ratchet adjusting ring. Allows connection of cover flange without glue or mechanical fasteners. Reduces installation time and cost by providing 10° of post-pour adjustment of the cover flange.
- Conduit reducers and plugs provided. Allows direct reduction from 1 1/4'' [32mm] conduit to 1'' [25mm], 3/4'' [19.1mm] or 1/2'' [12.7mm] conduit. Reduces installation time by providing direct reduction and separate plugs by eliminating the need to cut out plugs to form reducers.
- Cubic inch markings on the interior of the box. No need to calculate cubic inch capacity for wire fill, saving installation time.
- Ratchet adjusting ring has built-in fiber storage. Provides bend radius control for fiber optic cables.
- Pass-through capability. Can feed multiple gangs from a single cable feed location. Reduces total installation time.
- Modular design and gangability. One SKU to order boxes with the ability to configure boxes as needed on the job site.
- Boxes and covers have been listed by Underwriters Laboratories Inc. to their standard UL514A, 514C, 514D, and Canadian standard C22.2.
- Datacom connectivity options. Accepts industry standard and proprietary devices from a wide range of manufacturers to provide a seamless and aesthetically pleasing interface for voice, data, audio, and video applications at the point-of-use. A wide selection of data and bezel options available for use with Ortronics ® TracJack ™ and Series II devices.
- Internal spacer. Protects box from deformation of the sidewalls when high temperature additives are used in the concrete pour.
- Redesigned mudcap. High impact mudcap protects the box from damage when heavy equipment such as scissor lift trucks come in contact with the box during installation.
Specifications
General Info
Product Line | Wiremold | ||
Color | Black | ||
UPC Number | 786564524304 | ||
Country Of Origin | United States | ||
Construction | Not Assembled | ||
Application Sector | Commercial | ||
Standard | cULus Listed Nonmetallic Outlet Boxes: File E110748 Guide QCMZ. | ||
Type | Floor Box |
Dimensions
Product Width US | 4.13 in | ||
Product Weight US | 2.27 lb | ||
Product Volume US | 183.69 cu in | ||
Product Depth US | 7.13 in | ||
Product Height US | 6.25 in | ||
Cubic Capacity | 100 cu in |
Additional Information
RoHS Conformant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. | |
Product Environmental Profile | Yes |
Listing Agencies / 3rd Party Agencies
cULus ListingNumber | E110748 | ||
cULus Listed | Yes |
Buy American Act Compliance
NAFTA | Yes |
Technical Information
Cable Entry | Knockouts & Conduit Hubs | ||
Number of Outlets | 0 |
Resources
BIM Models
880MP Series Modulink Device Communications Cover Plate - 829CK
rfa
880MP Series Modulink Device Cover Plate - 828GFITC
rfa
880MP Series Modulink Device Flange - 818TCAL
rfa
880MP Series Modulink Device Flange - 827
rfa
880MP Series Modulink Device Flange - 828TCAL
rfa
880MP Series Modulink Device Flange - 838TCAL
rfa
880MP Series Modulink Device Internal Elbow Fitting - 817
rfa
880MP Series Modulink Device Plate - 830CKTCLAL
rfa
880MP Series Modulink Device Plate - 837
rfa
880MP Series Nonmetallic Retangular Box - 880MP
rfa
Modulink 880 Nonmetallic 1-Gang Fire-Classified Floor Box
zip
Modulink 880 Series BIM Model
zip
Modulink 880MP BIM Model
pdf
View More
CAD Drawings
1-Gang 1" Screw Plug Cover Plate, 829CKAL-1
dxf
1-Gang 3/4" Screw Plug Cover Plate, 829CKAL-3/4
dxf
880MP Series Modulink Communications Cover Plate - 829CK-1
dxf
880MP Series Modulink Communications Cover Plate - 829CK-1/2
dxf
880MP Series Modulink Communications Cover Plate - 829PSTC
dxf
880MP Series Modulink Floor Box Communication Cover Plate - 829PCK
dxf
880MP Series Modulink Floor Box Communications Cover Plate - 829CK
dxf
880MP Series Modulink Floor Box Communications Cover Plate - 829CK-3/4
dxf
880MP Series Modulink Floor Box Communications Cover Plate - 829STC
dxf
880MP Series Modulink Floor Box Cover Plate - 829PFL
dxf
880MP Series Modulink Floor Box Duplex Cover Plate - 828SPTC
dxf
880MP Series Modulink Floor Box Flange - 817PCC
dxf
880MP Series Modulink Floor Box Flange - 827PCC
dxf
880MP Series Modulink Floor Box Flange - 837PCC
dxf
880MP Series Modulink Floor Box Nonmetallic Duplex Cover Plate - 828PR
dxf
880MP Series Modulink Floor Box Nonmetallic GFI Cover Plate - 828PRGFI
dxf
880MP Series Modulink Floor Boxes Duplex Cover Plate - 828R
dxf
880MP Series Modulink Nonmetallic Rectangular Floor Box - 880MP
dxf
880MP Series Modulink Nonmetallic Rectangular Floor Box Adjusting Ring - 880MPA
dxf
Omnibox 1-Gang Powder-Coated Aluminum Combo Carpet & Tile Flange, 817TCAL-XX
dxf
Omnibox 2-Gang Powder-Coated Aluminum Combo Carpet & Tile Flange, 827TCAL-XX
dxf
Omnibox 3-Gang Powder-Coated Aluminum Combo Carpet & Tile Flange, 837TCAL-XX
dxf
Omnibox Brushed Aluminum Duplex Cover Plate, 828R-TCAL
dxf
Omnibox Brushed Aluminum GFI Cover Plate, 828GFITCAL
dxf
Omnibox Series Fire Classified Flange - 817B
dxf
Omnibox Series Fire Classified Flange - 817C
dxf
Omnibox Series Fire Classified Flange - 827B
dxf
Omnibox Series Fire Classified Flange - 827C
dxf
Omnibox Series Fire Classified Flange - 837B
dxf
Omnibox Series Fire Classified Flange - 837C
dxf
Omnibox Series Fire Classified Floor Box GFI Cover Plate - 828GFITC
dxf
Omnibox Series Fire Classified Single Locking Cover Plate - 828DLR
dxf
Omnibox Series Flange - 817T
dxf
Omnibox Series Flange - 827T
dxf
Omnibox Series Flange - 837T
dxf
View More
Sell Sheet
Supporting Document
Product Environmental Profile
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
What is the trim kit for laminate flooring for the 880mp?
Hi Clint,
The 880MP uses the combination carpet/tile flange assemblies. We offer brass (817B), brushed aluminum (818TCAL), plastic (817PCC-xxx)m and various powder-coat color option (817TCAL-xx). Here is a link to the spec sheet for review of all the flange and cover options:
https://legrand.webdamdb.com/directdownload.php?ti=55656443&tok=0mvsPZSSqCuXtQ86TJRjQQRR
If you need any additional information, please feel free to reach out to us directly at 1-844-957-3783, option 2 for Wiremold, followed by option 2 again for tech support. You can also email us directly at technical.support@legrand.us. Thank you.
Date published: 2022-11-08
what is the minimum concrete depth of the 880MP?
Hi Damon,
Minimum concrete depth is 3 1/2" (89mm) and maximum concrete depth is 6" (152mm).
Thank you,
Date published: 2022-10-21
Are these fire-rated?
Hello,
The 880MP is not a fire-rated box. However, we do have a fire classified version which is part number 880MPFC.
Thank you
Date published: 2022-09-26
Are there extensions for these boxes?
Hello Brandon,
The 880MP boxes don't offer an extension. The boxes are 6" tall and are designed to be cut down after the pour so they are level with the top of the concrete. If you can reach out to us directly at 1-844-957-3783, option 2 for Wiremold, followed by option 2 again for tech support, or email us directly at technical.support@legrand.us with a detailed description of the application we will be able to see if there are any options.
Thank you,
Date published: 2022-08-15
Is this box listed for installation in a concrete floor at grade?
Hello Janet,
Yes, this box can be embedded in concrete on-grade level floors.
In general, nonmetallic, cast iron or epoxy painted floor boxes can be installed on-grade in concrete pours.
Thank you!
Date published: 2022-06-23
are you able to connect to these boxes on any side? or just on the ends? documentation says the knockouts are not for conduit only to gang them together
Hi Bill,
The boxes are gang-able up to (3) gangs. There are hubs on the end for conduit entry, and knockouts on the side walls to tunnel from one box to another. For instance, If two boxes are ganged together for a single service application you can use the side knockouts to feed both boxes from one box, instead of two individual conduit feeds. If you're doing a single gang box you will want to use the ends with the appropriate hub adapters for PVC conduit.
Date published: 2023-01-18
Bazaarvoice SAP Hybris Integration Version 2.8.1