text.skipToContent text.skipToNavigation

Front of radiant® Single Pole 3-Way Occupancy Sensor, White with plate cover

Front of Stainless Steel and Gold radiant® Single Pole 3-Way Occupancy Sensors

Specifications: Single Pole, Compatible with all loads, 600W 120V 60Hz Rating

Energy savings. Automatically turns lights on when you enter a room, and off when you leave.

Hands free. Simply walk into the room to turn on the lights.

Front of radiant® Single Pole 3-Way Occupancy Sensor in white

radiant® Single Pole 3-Way Occupancy Sensor, Tri-Color

Name: radiant® Single Pole 3-Way Occupancy Sensor, Tri-Color
Brand: radiant Collection
SKU: RRW600UTC

RRW600UTC radiant Collection

radiant Single-Pole/3-Way Occupancy Sensor is rated 2.9 out of 5 by 11.

$33.39 USD

Simplify control while saving energy, with the radiant® Occupancy Sensor. Automatically turning the light on when someone enters a room, and shutting it off when the room is empty, this sensor includes an adjustable timed delay for shut off, as well as additional settings for more flexible control. Part of the radiant® Collection, it features clean lines and smooth paddle action for a sophisticated touch. Made exclusively for use with screwless Wall Plates from the radiant® Collection, sold separately.

Color Tri Color (White, Ivory, Light Almond)

Free shipping on orders over $49 & free returns

Quantity

In Stock

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

Passive infrared (PIR) sensor switch technology with 180° coverage up to 600 sq. ft. Rated for up to 600W (5A) of LED lighting.
Works with virtually any bulb/fixture, including: LED, incandescent, fluorescent, compact fluorescent (CFL), magnetic low-voltage (MLV) and electronic low-voltage (ELV), 1/6 hp.
Turn the light on when you enter, and let it turn itself off automatically after you leave for true convenience. Perfect for bathrooms, hallways, closets, garages, and more.
Locator light illuminates when switch is off, emitting a soft glow to help you find it in the dark.
Features an adjustable time delay to off after no motion is detected. Delay settings range from 30 seconds to 20 minutes after the room is vacated (default 5 minute delay).
Auto ON/Auto OFF functionality as default. Easily configurable to Manual ON/Auto OFF to meet any need or preference in the home.
Replace any basic light or fan switch in 15 minutes or less. Supports single pole and multi-location installs. No neutral required.
Complete the look with a sleek, screwless radiant® Wall Plate, and coordinate with other designer switches and outlets available from the radiant® Collection.
More color options available to fit any style, including finishes to match current hardware and lighting trends.

Specifications

General Info

Product Line	Pass & Seymour
Replaced by Part Number
Color	Ivory, Light Almond, White
Country Of Origin	China
Features	Motion Sensor
Switch Type	Motion Sensor
Application Sector	Residential
Standard	cULus

Dimensions

Product Width US	1.69 in
Product Depth US	1.88 in
Product Height US	2.63 in

Listing Agencies / 3rd Party Agencies

cULus Listed

Yes

Technical Information

Target Size	180 deg
Response Frequency	60 Hz
Sensor Type	Occupancy
Amperage	5 A
Number of Poles	3-Way, Single Pole
Wattage	600 W
Mounting Type	Box
Sensing Range	600 sq ft
Sensitivity	60Hz
Load	120VAC
Environmental Conditions	Indoor Use Only

Resources

Rated 5 out of 5 by Charles 1547 from "You must unlearn what you have learned." -Yoda Recently purchased one of these switches on sale from Amazon. As others have pointed out, the instructions are not as intuitive as they could be. But, the diagrams for connecting the wires for all possible configurations is very straight forward. Black goes to the incoming hot or feed for all scenarios, red for the load, yellow is the signal wire for other radiant timers (or one of the "travelers" in 3-way configs, they call it the "runner"), white goes to neutral, and the ground screw for your equipment grounding conductor. The single pole configuration is much easier to work with because it's pretty standard, whereas the 3-way is not traditional by any means. This is where Yoda's wise words directly apply. You are required to know which wires are your incoming hot and outgoing load, especially for 3-way retrofitting applications. This will save you time, because you may need to use the now spare "traveler" as the means for bringing connection to either your feed or load to the radiant timer. What was very surprising to me was the use of the common, on a paired 3-way switch, to be grounded per their instructions. It left me wondering if using the circuit neutral, the grounded conductor, would suffice or if the equipment grounding conductor is the only conductor permitted; I used the EGC and it worked as intended. *Always follow the manufacturer's instructions* As a licensed electrician, I appreciate that there is only one way to install and program this device through the instructions. Very easy to catch a mistake this way. These installation instructions coupled with the programming of the device are very much to the "T" and leave no room for error. I actually had to use a timer during the programming phase to initiate the time-delay and initiate occupancy mode; would recommend since you can overshoot on your own phyiscal count. Using the charts for the desired functions was easy with the blinking LED as a reference for each setting present and just pressing the button to move on to the next. I would not consider this an easy switch for those just looking to plug-and-play but it does what it was designed to do. If you follow the instructions, it will work. I will be buying more of these to install on other projects in the future.

Date published: 2022-08-26

Rated 1 out of 5 by 10Driver from Lousy instructions... The instructions do not properly address what to do with the existing wires. For example, when wiring to a second Sensor switch in a 3-way circuit, nothing is mentioned about the second black runner wire. The first runner is connected to the yellow wire on the switch which is then connected to the yellow wire on the second switch. The red switch wire is not connect and capped. The Line wire is connected to the black wire on the switch but what do you do with the second runner wire? Cannot get the switches to work as shown.

Date published: 2020-07-07

Rated 3 out of 5 by Colin from Works well just not the range I needed for my gara Works well except range of motion detection is not far enough to see me when on my treadmill on the other side of the garage. I thinking of setting up something that moves constantly within the range of the meter so the lights don’t shut off mid run! Any help from Legrand would be a big help.

Date published: 2023-01-30

Rated 3 out of 5 by GSBJackson from Poor Instructions I was this close to returning to Lowe’s before coming on this site to learn that the brown wire is not needed. After eliminating that wire, it worked like a champ. I also learned that their is no manual On/Off, only manual On. My wife is going to have fits with that limitation. May be going back anyway.

Date published: 2019-12-02

Rated 1 out of 5 by John from Poor instructions This faux "switch" comes with RED/BLACK/YELLOW wires. The instructions do no not clearly state what the yellow wire is for. Found out that you can not use it to turn off the light/fan. You need to wait until it runs its cycle of 1/5/10 mins etc. Bought at Lowes - Will be returning it.

Date published: 2019-03-12