




Discontinued - 30-in Plastic Enclosure with Hinged Door | SUB ENP3050NA
ENP3050
On-Q
Bazaarvoice SAP Hybris Integration Version 2.8.1
Replaced by ENP3050NA, ENP3050NA
Constructed with a robust, wireless transparent ABS plastic material, this lightweight enclosure is designed to integrate wireless devices into traditional structured wiring installations.
The enclosure mounts easily for both surface and recesse
- Send
- Save as PDF
-
FavoriteFavoriteAdded to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Made with ABS plastic, the enclosure is designed to integrate wireless devices without interference
- Extruded cover adds 1.2'' of depth for cable headroom and 3rd party device compatibility.
- Universal mounting grid maximizes compatibility with 3rd party products without additional brackets.
- Extra venting along the vertical plane of the door allows for superior heat dissipation.
- Staggered mounting tabs allow multiple enclosures to mount in adjacent stud bays.
- Cover includes metal hinge that attaches to enclosure in seconds.
- Lockable with provided screws.
- Tapered design allows enclosures and covers to stack for efficient transportation and warehousing
- UL listed.
Specifications
General Info
Product Line | On-Q | ||
Replaced by Part Number | ENP3050NA, ENP3050NA | ||
UPC Number | 804428431596 | ||
Country Of Origin | China | ||
Package Quantity | 1 | ||
Type | Enclosure |
Additional Information
RoHS Conformant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. | |
Product Environmental Profile | Yes |
Listing Agencies / 3rd Party Agencies
cULus Listed | Yes |
Resources
Installation Instructions
Guide Form Specifications
Cutsheet
Customer CAD PDF
Supporting Document
Product Environmental Profile
Sell Sheet
CAD Drawings
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Is there a requirement for clearance to open the cabinet door. For access to the interior
We do not have a front clearance measured. The door is approximately 16-17" wide so I would suggest a minimum clearance of 20" to open the door. You would want more ideally so you can stand in front of the unit while opening the door.
Date published: 2022-10-10
I have the OnQ 3050 box but have lost the screws to attach the trim/door to the box. What screws need to be used?
They are #6-20 Type AB screws. The screws are .600" in length, but if you get a 3/4" screw, you should be fine.
Date published: 2023-02-08
What are the inside dimensions of the ENP3050, without the cover door?
This product number is no longer current.
The new product number is ENP3050NA.
A drawing of the bucket for the ENP3050NA is attached to this response.
Date published: 2022-03-03
Are there shelves like the Leviton 49605-AUB Plastic Universal Shelf Bracket for Structured Media Center, White that will work with this enclosure?
Try part numbers
364896-01 or
364904-01
Date published: 2021-01-26
Are these enclosures, also the 20" and 42" versions, lockable with a padlock? One picture appears to have a padlock hasp but it is unclear.
these enclosures are now discontinued with a new version available the ENPXXXXNA
These have a hole in the lid that accepts one of our standard OnQ door locksets.
Date published: 2020-12-03
Will your 48845CC6 fit on here?
Hello,
No it will not. That unit is meant to mount into a typical 19in rack mount space. It will not fit into the enclosure.
Thank you.
Date published: 2019-04-19
What products are compatiable with the universal mounting grid?
Hello,
The device is designed to handle a bulk of Luxul products and a variety of other third party pieces. We do not have a list of devices as the overall design is meant to be able to secure a pretty diverse set of modems/routers/security devices. What are you looking to mount specifically?
Thank you.
Date published: 2019-04-19
Will the ENP3050 cabinet accept 2" conduit in top and bottom of cabinet? Do I need a trim ring with the ENP3050 cabinet? I have 15 cat 6 network cables and 6 RG6 coax cables to terminate inside the cabinet, will this also allow for a network switch. What
Hello,
The answers to your question:
1. The holes at the top of the cabinet are 2' in measurement and they should be able to take 2' conduit without issue. The holes at the bottom are only 1 and 1/4 inch and will not be able to handle that conduit.
2. No. Its optional if you want to cover up the drywall around the enclosure.
3. It depends heavily on what product you are mounting to the enclosure but if you're using multiple network devices or telecom devices, you should have enough space left over for a standard sized switch/mount.
Thank you.
Date published: 2019-03-04
Bazaarvoice SAP Hybris Integration Version 2.8.1