




Discontinued - 30-in Plastic Enclosure with Hinged Door
ENP3050
On-Q
Discontinued - 30-in Plastic Enclosure with Hinged Door is rated
out of
5 by
2.
Bazaarvoice SAP Hybris Integration Version 2.8.1
Replaced by ENP3050NA
Constructed with a robust, wireless transparent ABS plastic material, this lightweight enclosure is designed to integrate wireless devices into traditional structured wiring installations.
The enclosure mounts easily for both surface and recesse
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Made with ABS plastic, the enclosure is designed to integrate wireless devices without interference
- Extruded cover adds 1.2'' of depth for cable headroom and 3rd party device compatibility.
- Universal mounting grid maximizes compatibility with 3rd party products without additional brackets.
- Extra venting along the vertical plane of the door allows for superior heat dissipation.
- Staggered mounting tabs allow multiple enclosures to mount in adjacent stud bays.
- Cover includes metal hinge that attaches to enclosure in seconds.
- Lockable with provided screws.
- Tapered design allows enclosures and covers to stack for efficient transportation and warehousing
- UL listed.
Specifications
General Info
Type | Enclosure | ||
Product Line | On-Q | ||
Country Of Origin | China | ||
Replaced by Part Number | ENP3050NA | ||
UPC Number | 804428431596 |
Listing Agencies / 3rd Party Agencies
cULus Listed | Yes |
Additional Information
RoHS Compliant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. |
Resources
Cutsheet
Installation Instructions
CAD Drawings
Supporting Document
Sell Sheet
Guide Form Specifications
Customer CAD PDF
Reviews
Rated 3 out of
5
by
Nov 2024 Buyer from
Fine box, but bring zip ties
The box is fine. When installed it looks pretty good and has good ventilation. However, it takes some patience to mount in a finished wall. Because the wall was finished, I needed to remove the plastic mounting wings (you can break them off pretty easily). I also needed to carve away the drywall that covered the stud to get this box to sit flush because the lip is wider than standard 16” stud gaps. Finally, I had to drill holes in the side of the box to mount a couple lag bolts horizontally into the studs on each side. I really think this box should have come with side mounting holes but it’s easy to drill holes and the plastic is pretty stiff so there wasn’t any cracking or otherwise breakage in the process.
BE WARNED: this box does not work well with Legrand mounting accessories. Accessories such as the shelves, swinging mount plates, and others have little black mounting pins.. those pins are garbage. They way they work is you press them into a mounting hole and when doing so it presses the inside out of the back which expands to hold the accessory in place - much like a drywall anchor works. EXCEPT..pulling on the plastic mounting pin then retracts the middle and it’s no longer expanded and slides right out. Should make for easy mount/dismount but the weight of a device on any accessories mounted this way just pulls the pins out. The force of gravity on a device mounted on a vertical plane will naturally put pressure on the pins and pull them away and out of their position. I also purchased a Legrand coax splitter to mount and the stationary arm that doesn’t need one of those black mounting pins, but rather sits inside the box’s mounting holes, just falls out. None of the various Legrand box accessories I purchased could be securely mounted in this box. This box is either not made for Legrand accessories, Legrand accessories weren’t made to work with it, or Legrand just has very extremely poor mounting hardware. Either way, with some patience, I was able to zip tie all of my gear to secure it. However, that’s a semi-permanent end result so if you’re looking for flexibility in either mounting the box in a finished wall or flexibility to rearrange your gear inside the box, I would caution you to not purchase this box.
Date published: 2025-02-05
Rated 5 out of
5
by
Steve from
Works as expected
Box is sizeable enough to hold all necessary components. Fairly simple install
Date published: 2025-04-22
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Are these enclosures, also the 20" and 42" versions, lockable with a padlock? One picture appears to have a padlock hasp but it is unclear.
these enclosures are now discontinued with a new version available the ENPXXXXNA
These have a hole in the lid that accepts one of our standard OnQ door locksets.
Date published: 2020-12-03
Will your 48845CC6 fit on here?
Hello,
No it will not. That unit is meant to mount into a typical 19in rack mount space. It will not fit into the enclosure.
Thank you.
Date published: 2019-04-19
What products are compatiable with the universal mounting grid?
Hello,
The device is designed to handle a bulk of Luxul products and a variety of other third party pieces. We do not have a list of devices as the overall design is meant to be able to secure a pretty diverse set of modems/routers/security devices. What are you looking to mount specifically?
Thank you.
Date published: 2019-04-19
Will the ENP3050 cabinet accept 2" conduit in top and bottom of cabinet? Do I need a trim ring with the ENP3050 cabinet? I have 15 cat 6 network cables and 6 RG6 coax cables to terminate inside the cabinet, will this also allow for a network switch. What
Hello,
The answers to your question:
1. The holes at the top of the cabinet are 2' in measurement and they should be able to take 2' conduit without issue. The holes at the bottom are only 1 and 1/4 inch and will not be able to handle that conduit.
2. No. Its optional if you want to cover up the drywall around the enclosure.
3. It depends heavily on what product you are mounting to the enclosure but if you're using multiple network devices or telecom devices, you should have enough space left over for a standard sized switch/mount.
Thank you.
Date published: 2023-09-12
I have the ON-Q cover part #ENP3060-NA I am having a problem finding a laych for it. Do you have a latch or is there a suggestion for a latch? Thank You
Is this cabinet (ENP3050NA) BABA compliant?
Can the enclosure be mounted upside down? My power wire comes from above and my signal cables come in from below.
Can I buy just the front mounting frame? I already have the enclosure and door, but no mounting frame.
I'd like to mount the box with the electrical outlet on the top. Is that possible?
Bazaarvoice SAP Hybris Integration Version 2.8.1