Q-Series Patch Cords, CAT5E, Non-Booted, Blue, 1 FT
560-110-001
Quiktron
Q-Series Patch Cords, CAT5E, Non-Booted, Blue, 15 FT is rated
out of
5 by
73.
Bazaarvoice SAP Hybris Integration Version 2.8.1
Q-Series patch cords are a perfect solution for when cost and speed of delivery are top priority. Designed to perform to TIA-568.2-D standards, Q-Series cords are available in a full range of colors and lengths, stocked and ready to order.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Specifications
General Info
| Type | Copper Patch Cord | ||
| Application Sector | Commercial/Industrial | ||
| Product Line | Quiktron | ||
| Country Of Origin | Vietnam | ||
| UPC Number | 884815750271 |
Dimensions
| Product Length US | 1.0 FT | ||
| Product Weight US | 0.025 lb |
Additional Information
| RoHS Compliant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. |
Resources
Reviews
Rated 5 out of
5
by
AtlTomP from
Absolutely Awesome Dimmer
I purchased this dimmer as a replacement for some some other smart wi-fi dimmers I have in my home. After having installed and used the Legrand dimmers for a couple of months, I can now say that I intend to replace all of my existing wi-fi dimmers (approximately 50) with Radiant - Smart Tru-Universal Dimmers. Without taking time to discuss my complaints with the other dimmers I will say that the Legrand dimmers address every one of my concerns with the other product. In particular, here is what I like about the Legrand dimmers:
- Works seamlessly with Homekit. The setup was totally uneventful (what a difference!).
- Connects directly to your home wi-fi without the need for a bridge.
- Powered directly off of wall current and doesn't require batteries.
- Works in 3-way and 4-way applications. When used in conjunction with the Legrand Remote Dimmers it can control multi-way switch installations. And the remote dimmers do not require batteries or the use some weird bluetooth signal.
- All of the wiring connections are internal to the switch housing and not exposed on the outside of the housing - this practically eliminates the possibility of accidentally shorting one of the connections on the dimmer against the ground wire in the junction box.
- Does not require the use of a traveler wire between the the main dimmer and the remote dimmers in multi-way installations (this means that you don't have to be a rocket scientist to wire multi-way switches).
- The dimmers seem extremely stable and have never lost their connection to my home wi-fi.
After having struggled for a couple of years with my existing wi-fi dimmers, I am totally impressed with the Legrand product. I hope they continue to grow and expand their product offerings in this area!
Date published: 2020-06-05
Rated 1 out of
5
by
In the dark from
Wrong description on website, not tru-universal
I needed a tru-universal dimmer for a new light fixture I bought. Lighting store recommended Legrand and indicated I had to make sure it was ELV compatible, as all tru-universal dimmers are. Description on Legrand website mentioned this was tru-universal, compatible with ELV, MLV, halogen, LED, incandescent. Installed the dimmer, and got horrible buzzing sounds. Looked at the package and saw that this is not the tru-universal dimmer but an incandescent/halogen only. Don't waste your time and money. You need part RH703PTU. Anything without "TU" is not tru-universal. Legrand's website is wrong for the white switch (RH703PW) and the tri-color switch (RH703PTC)
Date published: 2020-12-14
Rated 5 out of
5
by
Texelena from
Great functionality and easy to install!
This product was super easy to install and integrate with Alexa, the instructions in setting the Smart Switch with our home network were very easy to follow and everything was up and running in a manner of minutes. Being able to remotely control the lights is very convenient, you can also manually click it on or use the app which is great. It is also still able to be used as a normal switch. The Wi-Fi smart switch looks almost identical to the other switches in our home with the addition of a nice small cool white led to show the switch is off and helps find it in the dark. This was a great addition on our journey to a smart home.
Date published: 2019-12-23
Rated 5 out of
5
by
Cowboy Joe from
Excellent product choice
I chose to use the legrand style switches and plugs in my remodeling project. I am so glad I did because everyone really likes how they look and they add such elegance and style to the kitchen, dining room, & bathroom.
Date published: 2019-08-10
Rated 5 out of
5
by
Bmar2787 from
Durable reliable
I got one of these switches to try out and I liked the way it worked so much that I switched all of my dimmer switches in my house to this same brand and style. The ones I had before hummed when dimmed down and these have not done that at all to me.
Date published: 2018-10-31
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Does this switch require a neutral?
Thank you for your inquiry. The radiant, incandescent dimmer (RH703PTCCV6) does not require a neutral.
Date published: 2024-06-25
Has this item been discontinued?
Hello David,
I have checked our inventory, and discontinued list. The DT-305 is not an obsolete item, and is available
Date published: 2024-08-22
hi, Wondering if a 2097traplw is considered a class b gfi receptacle?
Thank you for your inquiry. The legrand GFCI part number 2097traplw is a class A GFCI.
Date published: 2024-06-13
I have 3 occupancy sensors that do seem to shut off the lights when unoccupied. I see the red and green light flickering meaning we clearly have power.
The red and green are activity LEDs for the sensors, if the LEDs continue to flash when you stand still, then the sensor is likely false tripping. I suggest to start with placement, assure all sensors are 5-6' away from air supplies this is common to false trip the sensors causing lights to either stay ON or OFF.
If more assistance is needed, please call our Technical Support Team 1-800-879-8585
Date published: 2024-03-28
What is the IP rating of DT-#100 series?
We do not have a DT-100 sensor, if your question concerns the DT-305, this device is specified for indoor use only and does not have an IP rating.
Date published: 2024-01-31
Do you provide the cover plate (black) for this model?
Hello,
Part #: TP1BK would be the correct toggle wall plate in black.
Best Regards,
Technical Support
Date published: 2024-05-27
Can the #RH4FBL3PTC be used as a 4-way dimmer? If not, is there a matching one that does?
Hello,
The RH4FBL3PTC 0-10v dimmer will not support multi-location dimming applications.
Best Regards,
Technical Support
Date published: 2023-11-02
I have CI-305 sensors in an office space. The lights in this office space go out every 30 minutes (assuming that no one moves from their desks in that time). Is there an option to change the timer from 30 minutes to a longer period of time?
Hello,
The CI-305 will have the following time delay settings - Time Delay Adjustment 30 seconds to 30 minutes.
Best Regards,
Technical Support
Date published: 2023-10-18
where could i find the RFA (revit family) for this specific item? thanks in advance
You can find these types of files at the link below.Symbol library link
https://www.dropbox.com/sh/wj3zla8ee2nohfk/AAANItFYV8mK2wosfSEf3oW_a?dl=0
This is the complete library.
Date published: 2024-06-12
How to adjust dimmer trim span on the Lagrand DRCL453PWCCV4
Hello,
Please review the attachment that references how to calibrate the DRCL453PWCCV4.
Best Regards,
Technical Support
Date published: 2024-07-14
Does the CI 300 or CI 305 work with the BZ-50 power pack?
Yes, both the CI-300 and CI-305 are both 24v sensors and are compatible with BZ-50 power packs.
Date published: 2023-05-18
I bought a couple of these a few years ago. We are switching everything from almond to white but I didn’t save the extra pieces. I’m I able to buy just the pieces to do the switch over?
Hello Chris,
Unfortunately, we do not sell the Interchangeable face cover in white separately for this model dimmer.
Best Regards,
Technical Support
Date published: 2024-08-12
I have a DT-305 and the two incandescent light fixtures that it controls are blinking on and off constantly. Is this a defective sensor or power pack issue?
Please reach out to our tech. support team for further assistance troubleshooting this issue.
Legrand Technical Support:
Phone: 1 800-879-8585, Option 3 then Option 1
Mon - Fri: 7am - 7pm CST (excluding holidays)
Date published: 2023-03-27
I would like to know if this kind sensor is suitable for hallways 5-10feet wide. Do you any have documented case in order to evaluate the sensor response in that particular case? Thank you very much.
Hi,
The WT-2255 is a better suited sensor for hallway applications. It has a coverage pattern of 10 feet wide by 90 feet long.
Please visit the product page or reach out to our tech. support team for further assistance if required.
Legrand Technical Support:
Phone: 1 800-879-8585, Option 3 then Option 1
Mon - Fri: 7am - 7pm CST (excluding holidays)
Date published: 2023-03-27
How many LED watts is this switch rated for? I have 20 LED high bay fixtures that are 0/10v Dimmable, each is 171 watts. How do I determine how many switches I need?
Hello Erik,
There are two ratings which cannot be exceeded when considering a 0-10V dimmer such as the RH4FBL3PTC.
The first rating is the high voltage, high current dimmer rating associated with dimmer black wire and dimmer red wires. In the case of the RH4FBL3PTC, this rating is 10A at 120VAC or 5A at 277VAC. In general, multiply each ballast's power rating by the number of ballasts called for by the application, and this product cannot exceed the dimmer's high voltage, high current rating.
The second dimmer rating is the low voltage, low current rating associated with the dimmer violet and dimmer grey wires. In the case of the RH4FBL3PTC, this rating is 100mA of sinking current. The 0-10V ballast should provide this information. If the ballast datasheet does not show this information then the ballast's low voltage current sink value can be measured by connecting an ammeter from ballast violet to ballast grey wires when the ballast is powered. Once the low voltage sink current is measured, multiply this value by the number of ballasts in question. The resulting product cannot be greater than 100mA.
Best Regards,
Technical Support
Date published: 2023-05-03
UDO18KITEZ Can you please confirm for the MPN#UDO18KITEZ both the screw and bolt are ordered or separately.
The UDO dropout design includes a bend tab for securement to Cablofil wire mesh side wires. No field cutting or additional hardware is required.
Date published: 2024-05-30
Can a RH703PNICCV4 Dimmer be used to dim a halogen fixture that is has a 120v input and output is 11.5volts
This dimmer is rated for 700 Watts at 120VAC, 60Hz. You can use it to control a halogen or incandescent lighting fixture.
Date published: 2023-12-16
What is the compatible remote dimmer that works for WWRL50WHCCV2 this wifi dimmer switch?
Hello Danny,
Our HMRW: radiant Multi-Location Remote Dimmer will work with the WWRL50WH smart dimmer.
Best Regards,
Technical Support
Date published: 2022-11-29
Does the WWRL50WHCCV2 work with the Apple Home Kit?
The WWRL50WHCCV2 will integrate with Google Assistant and Amazon Alexa. It is not however compatible with Apple Home kit.
Date published: 2022-11-18
cat 6A cable fill capacity in the 24"x4" cable tray
497 cat6a cables with a 0.35" diameter can be installed in tray system CF105/600EZ (4" x 24" mesh tray)
Date published: 2023-12-26
Not an electrician. I believe I have two of these switches in my kitchen connected to 7 ceiling lights and I'm getting some flicker through out the dimming range. Any thoughts?
I would verify the model number of the dimmers by removing the wallplate. If it is the RH4FBL3P, it has a calibration wheel on the left side to adjust for flickering(see attached image). Also, you mention two dimmers controlling 7 ceiling lights so make sure that you are NOT using two dimmers in a 3way. It can only be one dimmer and a 3way switch.
Radiant products
1.844.957-3783
Mon - Fri: 8am - 6pm EST
(excluding holidays)
Email Us - tech.support@legrand.us
Date published: 2024-06-26
Installing a 4-way switch using 1 WWRL50 & 2 HMRW. My hot & load wire are in the same box so that's where I installed the WWRL50 which is working to turn the light on/off but my remote HMRW switches are not working. Is there a diagram for proper wiring?
The wiring diagram for this application is attached below.
Date published: 2022-03-25
is it possible to order the depluggable terminal and spring clips separately ?
Hello,
We unfortunately do not sell the depluggable terminal and spring clips separately at this time.
Please feel free to give us a call if you need further assistance.
legrand Contact information:
Phone #: 844-957-3783 - Option 1, followed by option 2 for Technical Support.
Monday - Friday | 8:00am - 6:00pm Eastern Standard Time (excluding holidays)
Best Regards,
Date published: 2022-03-18
is the retail price per unit? (if purchasing from legrand directly)
Hi Scott,
The part # MM20PDUMBFT1W-B has 2 brackets as a kit So price is per kit
Date published: 2022-11-28
Can the WWRL50WHCCV2 be put in place of one 3 way and the other 3 way switch be left in place? Just having the dimming in place at the dimmer and on/off control at the switch.
The WWRL50WHCCV2 dimmer needs to be paired with the HMRW(remote dimmer), when used in a 3way application.
Date published: 2022-07-16
Is this collection of smart dimmers (WWRL50WHCCV2) and smart switches (WWRL10WHCCV2) compatible to work with the LC7001 Whole House Lighting Controller ... and in turn work with home automation systems such as Control4? Thanks in Advance.
These switches do not work with the RFLC platform that the LC7001 runs on.
If you want switches in the Radiant Style that work with RFLC, look to the LC series switches.
A link to the catalog is below
https://legrand.webdamdb.com/directdownload.php?ti=55656066&tok=yoMF9zc7hvPrsVNfYL9AYwRR
Date published: 2022-01-26
WattStopper Part Number 70610678 HB340 assembly with extender module and L1 lens What is maximum mounting heights?
The Wattstopper HB-340 with a L1 lens has a maximum mounting height of 40ft. The extender adds approximately 4.5 inches to that maximum height.
Date published: 2022-01-11
Can’t control two back pack with one sensor
You should be able to have multiple powerpacks on one sensor using the attached wiring diagram.
Date published: 2022-01-07
Attempting install in 4 way using 1-WWRL50 & 3-HMRW. Of my 4 existing switches 2 have 3 wires (Bl, Wh & Red); and 2 have 4 wires (2 Bl and 2 Red). Do you have any diagrams on how to install the WWRL50 and HMRW with this configuration?
Attached are both 4way diagrams depending on which side of the circuit the WWRL50 is on.
Radiant products
1.844.957-3783 opt 1, then 2
Mon - Fri: 8am - 6pm EST
(excluding holidays)
Email Us - tech.support@legrand.us
Date published: 2022-02-08
how do you install the product what are the steps to installing it
Here is a link to the complete set of installation instructions for the sensor.
https://legrand.webdamdb.com/directdownload.php?ti=55647327&tok=pG2pR9JQX0RB5Rj0EAPWCgRR
Date published: 2021-11-29
Bazaarvoice SAP Hybris Integration Version 2.8.1