
Q-Series Patch Cords, CAT5E, Non-Booted, Purple, 14 FT
560-145-014
Quiktron
Q-Series Patch Cords, CAT5E, Non-Booted, Blue, 15 FT is rated
out of
5 by
73.
Bazaarvoice SAP Hybris Integration Version 2.8.1
Q-Series patch cords are a perfect solution for when cost and speed of delivery are top priority. Designed to perform to TIA-568.2-D standards, Q-Series cords are available in a full range of colors and lengths, stocked and ready to order.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Specifications
General Info
Type | Copper Patch Cord | ||
Application Sector | Commercial/Industrial | ||
Product Line | Quiktron | ||
Country Of Origin | Mexico | ||
UPC Number | 884815751117 |
Dimensions
Product Length US | 14.0 FT | ||
Product Weight US | 0.35 lb |
Additional Information
RoHS Compliant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. |
Resources
Cutsheet
Catalog
Reviews
Rated 5 out of
5
by
AtlTomP from
Absolutely Awesome Dimmer
I purchased this dimmer as a replacement for some some other smart wi-fi dimmers I have in my home. After having installed and used the Legrand dimmers for a couple of months, I can now say that I intend to replace all of my existing wi-fi dimmers (approximately 50) with Radiant - Smart Tru-Universal Dimmers. Without taking time to discuss my complaints with the other dimmers I will say that the Legrand dimmers address every one of my concerns with the other product. In particular, here is what I like about the Legrand dimmers:
- Works seamlessly with Homekit. The setup was totally uneventful (what a difference!).
- Connects directly to your home wi-fi without the need for a bridge.
- Powered directly off of wall current and doesn't require batteries.
- Works in 3-way and 4-way applications. When used in conjunction with the Legrand Remote Dimmers it can control multi-way switch installations. And the remote dimmers do not require batteries or the use some weird bluetooth signal.
- All of the wiring connections are internal to the switch housing and not exposed on the outside of the housing - this practically eliminates the possibility of accidentally shorting one of the connections on the dimmer against the ground wire in the junction box.
- Does not require the use of a traveler wire between the the main dimmer and the remote dimmers in multi-way installations (this means that you don't have to be a rocket scientist to wire multi-way switches).
- The dimmers seem extremely stable and have never lost their connection to my home wi-fi.
After having struggled for a couple of years with my existing wi-fi dimmers, I am totally impressed with the Legrand product. I hope they continue to grow and expand their product offerings in this area!
Date published: 2020-06-05
Rated 1 out of
5
by
In the dark from
Wrong description on website, not tru-universal
I needed a tru-universal dimmer for a new light fixture I bought. Lighting store recommended Legrand and indicated I had to make sure it was ELV compatible, as all tru-universal dimmers are. Description on Legrand website mentioned this was tru-universal, compatible with ELV, MLV, halogen, LED, incandescent. Installed the dimmer, and got horrible buzzing sounds. Looked at the package and saw that this is not the tru-universal dimmer but an incandescent/halogen only. Don't waste your time and money. You need part RH703PTU. Anything without "TU" is not tru-universal. Legrand's website is wrong for the white switch (RH703PW) and the tri-color switch (RH703PTC)
Date published: 2020-12-14
Rated 5 out of
5
by
Texelena from
Great functionality and easy to install!
This product was super easy to install and integrate with Alexa, the instructions in setting the Smart Switch with our home network were very easy to follow and everything was up and running in a manner of minutes. Being able to remotely control the lights is very convenient, you can also manually click it on or use the app which is great. It is also still able to be used as a normal switch. The Wi-Fi smart switch looks almost identical to the other switches in our home with the addition of a nice small cool white led to show the switch is off and helps find it in the dark. This was a great addition on our journey to a smart home.
Date published: 2019-12-23
Rated 5 out of
5
by
Cowboy Joe from
Excellent product choice
I chose to use the legrand style switches and plugs in my remodeling project. I am so glad I did because everyone really likes how they look and they add such elegance and style to the kitchen, dining room, & bathroom.
Date published: 2019-08-10
Rated 5 out of
5
by
Bmar2787 from
Durable reliable
I got one of these switches to try out and I liked the way it worked so much that I switched all of my dimmer switches in my house to this same brand and style. The ones I had before hummed when dimmed down and these have not done that at all to me.
Date published: 2018-10-31
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Hi How do you change the wifi network used by the device ?
In order to change the WiFi network your SmartLights device is connecting to, you will need to remove and re-add your device to your app. Alternatively if you prefer, you can change your network SSID (Network name) and password to match the SSID and password settings from your previous router.
Radiant products
1.844.957-3783 opt 1, then 2
Mon - Fri: 8am - 6pm EST
(excluding holidays)
Email Us - tech.support@legrand.us
Date published: 2021-11-16
What does tricolor mean? I am looking for light almond.
The Tri-color dimmers will include Ivory, Light Almond, and White interchangeable facekits.
Date published: 2021-11-10
Where is this product manufacturered?
The Cablobend is manufactured in the United States
Date published: 2022-10-15
How many sensors can be put daisy chained together?
Each Wattstopper BZ series power pack can supply power for 7 DT-305 sensors.
Date published: 2021-09-15
Is there an additional app needed to control this switch besided the Google home app? I do not want to install another app on my phone to use this switch with Google home.
Yes, this dimmer would have to be connected using the Legrand Smartlights app to control it through GoogleHome.
Date published: 2022-05-08
Are these 3-way - can two smart dimmers be used to control the same lights? For example - can one be placed on each end of a long hallway to control the same hallway lights?
The WWRL50WHCCV2 can be used in a 3way but has to be paired with a HMRTC or HMRW(remote dimmer) in the other location of your 3way.
https://www.legrand.us/wiring-devices/light-switches-and-dimmers/dimmers/radiant-multi-location-remote-dimmer/p/hmrtc
Date published: 2021-07-22
Can the smart dimmer be paired with two smart outlets that work with one dimmer?
Hello,
This smart line doesn't have the feature to pair with other devices. However, you can group devices together within the app so all (or some) devices can be turned on/off from the app.
Thank you,
Date published: 2021-07-09
Just want to operate switch manually and am having no success I just need to turn it on and off. It was installed professionally
The dimmer should operate manually if wired directly to the light load and the Air Gap switch on the right side of the dimmer needs to be in the UP position for the dimmer to have power. If still having issues, contact Technical Support for troubleshooting assistance:
Radiant products
1.844.957-3783 opt 1, then 2
Mon - Fri: 8am - 6pm EST
(excluding holidays)
Email Us - tech.support@legrand.us
Date published: 2021-05-18
Nothing but problems. Legrand already sent me a replacement, but it has the same issue. It becomes non-responsive in the app, and then eventually I can't even add the switch back again after removing it. Now it's stuck in a firmware update.
Hello,
Sorry to hear about the issue you're having with this dimmer. Please contact us at 844-957-3783 and we can work on getting this resolved for you.
Thank you,
Date published: 2021-05-14
I'm trying to install this dimmer as a replacement for as existing Lutron 3 way dimmer. The other existing switch is a simple (non-dimmer) paddle switch. I cannot get the new legrand dimmer to work. Why?
When using the WWRL50WHCCV2 Smart dimmer in a 3way, you need to also replace the 3way switch with a remote dimmer(HMRW or HMRTC) in the other location.
Date published: 2021-04-26
Will these dimmer WWrl50whccv2 work with apple Home?
These switches are not HomeKit compatible.
If you want HomeKit switches, you want the HKRL50WH.
If you are setting up a 3-way circuit using these switches, you would use the HKRL50WH and up to 4 HKRL60s for the second,third,fourth, and fifth switches in that circuit.
Date published: 2022-01-18
Can I control any of these 3-way switches with a smart hub?
The LC2101 is the dimmer that connects to our LC7001 Lighting Control Hub.
Pair that with the LC2103 RF Remote dimmer for 3-way capability.
If you need a Switch instead of a dimmer, use the LC2201 switch and the LC2203 dimmer.
Please feel free to reach out to Technical Support if you have more specific questions about Legrand's RFLC whole-house lighting system.
(800) 223-4162 Option 3, Option 2
Date published: 2023-12-16
Is there a list of compatible bulbs? I have installed some A19 dimmable LED bulbs that don't seem to be working (yes, they are dimmable!). I know the switch works because I tested with dimmable incandescent and those worked fine.
The dimmer works with virtually any dimmable lamp and load on typical residential and light commercial wiring (with the exception of 0-10V LED drivers). You may need to adjust the dimmer trim levels found under the Device Settings in the app.
Date published: 2023-03-25
I am using the RHCL453P with 6 light bulbs, 8.8 watts each and dimmable on two bathroom light fixtures. Does the 6 bulbs then make the total wattage exceed the minimum of 10 watts? They started to flicker recently at the highest setting.
If you have 6 bulbs at 8.8W's that is a total of 52.8W's and the dimmer is rated up to 450W's of LED. The 10W in the minimum load required and you are above that so that is not an issue.
Radiant products
1.800.223-4162 opt 3
Mon - Fri: 8am - 6pm EST
(excluding holidays)
Email Us - tech.support@legrand.us
Date published: 2021-01-25
I have an existing dual gang box with two Legrand conventional wall switches. Will this switch fit as a replacement in the space used by one the existing switches while keeping the other conventional switch?
Yes, the WWRL50WHCCV2 can be used to replace one of your existing switches.
Date published: 2021-01-18
do i have to use ground wires for this to work
Yes a ground connection will be needed for this device to work. The dimmer will also require a neutral wire.
Date published: 2020-11-25
Can the dimmer be programmed to come on automatically at dusk (like an astro timeclock), or do I manually have to set a time and change it throughout the year?
You can set your ON/OFF timed events through the app and it will follow the dusk to dawn changes with your time zone.
Date published: 2020-10-21
Is it possible to calibrate the minimum and maximum dimming levels?
Yes, the adjustments can be made though the app.
Date published: 2020-08-31
My contractor installed this, caulked the switch plate, and threw away the packaging. So I cannot get to the QR code very easily to set up wifi. What is a workaround for this? How can I connect to wifi without the QR code on the switch?
We would be happy to assist you with your install of your Smart dimmer. Please reach out here: (877) 833-3303 8:00 a.m.-6:00 p.m. EST (Mon - Fri) smartlights@legrand.us
Date published: 2021-02-14
If I use this in a 4 way, do I need to add remote dimmers to the other switch locations or can I just use this one dimmer and regular switches in the circuit?
The WWRL50 master dimmer has to be used with remote dimmers(HMRTC or HMRW) in the other locations.
Date published: 2020-06-03
How do I set this up for google home? I used the Legrand Smart Lights WiFi app to set up the dimmer but its not in the choices for google..
Thanks the issue is I did just that and I now get a "something went wrong" prompt every time I try to turn it on from google home. It worked one time right after setup, and then didn't and hasn't.
Date published: 2020-04-29
Is it possible to calibrate the smart dimmer? My lights are at full brightness by time the dimmer is at 45%.
Adjustments to the dimmers light levels can be made under "Device Setting" in the APP.
Date published: 2021-03-19
Where do I find the MAC address of this WWRL50WH device? I am connected to Legrand Smart Lights app and linked with Google Home. Still cannot find the MAC address of this device in the Legrand Smart Lights app. I need to do MAC filtering on my WiFi
Thanks for confirming the MAC Address. I see the MAC address and starts with 28:6D:97:xx:xx:xx and confirm it. Shows up as Samjin manufacturer.
Date published: 2020-02-29
I have an older home with 2 wire electrical. Will these dimmers work with that wiring?
The SmartLights dimmer will require a separate Neutral wire to function properly so it will not work if you only have 2 wires in your electrical box.
Date published: 2019-10-17
Is there a option in black, or interchangeable face in black color? I already own the switch but need an option in black as all other switches are in black
The SmartLight devices are only available in White, Light Almond, and Nickel.
Date published: 2020-02-29
Does the AC106A6 support PoE? if so how many watts per port
Bazaarvoice SAP Hybris Integration Version 2.8.1