text.skipToContent text.skipToNavigation

Remote Test Switch on Single Gang Plate

EMTS-100 Wattstopper
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 46ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Wattstopper’s ELCU-200 Emergency Lighting Control Unit is a self-contained device that allows any standard lighting control device to control emergency lighting in conjunction with normal lighting in any area within a building.

Voltage None
  • Send
  • Save as PDF
  • Add to favorites Remove from favorites


  • Eliminates energy waste caused by emergency lighting that is always on
  • Integral push-to-test button activates emergency mode for a true test condition
  • Connects to EMTS-100 Remote Test Switch or other input to activate emergency on from a remote location
  • Operates as a control device or as a shunt
  • Senses local single circuit power failure
  • Zero cross switching technology for reliability and increased product life
  • Compatible with Wattstopper occupancy sensors, daylighting controls, lighting control panels, and dimmers


General Info
Product Line Wattstopper
UPC Number 754182919567
Country Of Origin United States
Product Width US 3.0 in
Product Weight US 0.2 lb
Product Volume US 36.0 cu in
Product Depth US 4.8 in
Product Height US 2.5 in
Additional Information
RoHS Conformant Yes This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.
Security   Yes This product is ioXt certified


  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 10ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Questions & Answers

Can i use the ELCU to control/dim a LED fixture with integral emergency battery?

Asked by: WL
Good morning The ELCU does not have dimming capability so if you are trying to dim LED fixtures I would recommmend that you use a control modular like and LMRC 211 which is 0 to 10 volt dimming with the ELCU.
Answered by: Tier 1 Tech Support
Date published: 2022-09-15

Re: ELCU-200-347 Are the contacts rated for 20 amps , the spec sheet indicates 16a @120-347VAC Max Load Requirements . Please Clarify Thanks

Asked by: David
The ELCU-200-347 is rated for 16amps @120-347vac
Answered by: Tier 1 Tech Support
Date published: 2022-11-25

Good afternoon, can you control different lights in different rooms with one unit? Or do you have to install one device per room.

Asked by: Roman
You could if you run the lights in parallel but when you are trying to control certain lights in one area other lights may come on that you may not want to use at that moment in another area. I would recommend one per a room.
Answered by: Tier 1 Tech Support
Date published: 2022-06-21

Is the EL-CU-200 rated to switch LED drivers?

Asked by: Joseph
Yes, it can switch up to 20A of LED fixtures. But I would de-rate your load to much less because of the LED inrush and other issues. A 10A LED load is huge these days.
Answered by: Gordo
Date published: 2021-02-05
  • y_2024, m_6, d_20, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_12
  • loc_en_US, sid_EMTS-100, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_legrand
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 20ms