text.skipToContent text.skipToNavigation

RC4 Multi-Service Poke-Thru Assembly, Black

Unit includes four prewired 20A receptacles. Each duplex receptacle is wired as separate circuit. The duplex can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY) or brushed metal finishes in aluminum (AL), and brass (BS). Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass colored slide holder (AB). Aluminum flange also available with nonmetallic aluminum colored slide holder (AA). Includes Wiremold Open System unloaded adapters to accept four discrete keystone connectors from most manufacturers. Unit also includes Ortronics TracJack Mounting adapters and Ortronics Series II Communication Housing. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC4 Series Poke-Thru Devices require a 4inch (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8inch minimum.

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

Unit includes four prewired 20A receptacles. Each duplex receptacle is wired as separate circuit.
The duplex can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY) or brushed metal finishes in aluminum (AL), and brass (BS).
Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass colored slide holder (AB). Aluminum flange also available with nonmetallic aluminum colored slide holder (AA).
Includes Wiremold Open System unloaded adapters to accept four discrete keystone connectors from most manufacturers. Unit also includes Ortronics TracJack Mounting adapters and Ortronics Series II Communication Housing. Modular jacks sold separately.
NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC4 Series Poke-Thru Devices require a 4inch (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8inch minimum.

Specifications

General Info

Color	Black
Type	Poke-Thru
Application Sector	Commercial, Education, Healthcare, Hospitality
Product Line	Wiremold
Country Of Origin	Mexico
Number of Knockouts	2
Warranty Type	1-Year from Installation or 2-Years from Day of Sale
Standard	UL Fire Classified, cULus, NEC
UPC Number	786564131540

Dimensions

Product Depth US	16.38 in
Product Height US	8.25 in
Product Volume US	1114.86 cu in
Product Width US	8.25 in
Product Weight US	5.67 lb
Core Hole Size	4 in
Cubic Capacity	24.5 in³
Knockout Size	3/4 in

Listing Agencies / 3rd Party Agencies

cULus ListingNumber	E2961
cULus Listed	Yes

Additional Information

Product Environmental Profile	Yes
RoHS Compliant	Yes		This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.

Technical Information

Service Capacity	Dual
Fire Rating	2 hr
Floor Type	Carpet, Tile, Wood
Is Pre-Wired	Yes
Number of Outlets	4

Resources

Do the RC4 poke-thrus fit CAT6A or shielded CAT6 keystones? It looks like the space inside the RC4 is a tight fit.

Asked by: Adam

Hello, The RC4 has (2) 1/2" diameter openings to pass cables through. So, the capacity would be reduced depending on the diameter of the cable. However, most keystone connectors will fit in the adapters provided. Thank you