30TP-412V - 30TP Series Steel Tele-Power Pole

Hi, That pole comes with two communications plates that each have 4 keystone knockouts on them for a total of 8 spots for keystones. Thanks,

Hi, It is a painted steel. It is magnetic. Thanks,

Hello, Both junction box for the top and bottom base are included with the pole. If this is for an existing pole, V3010C is the junction box and E30-212 is the base for the bottom.

Hi, We would not offer that as a standard part. If you need any additional information, please feel free to reach out to us directly at 1-844-957-3783, option 2 for Wiremold, followed by option 2 again for tech support.  Thanks,

Hello, The Panduit furniture bezel appears to not be compatible with the knockout on our plate. Two 30TC-CVR communication plates are installed on each pole. The rectangular knockout on each cover accepts modular furniture bezels. The rectangular knockout size measures 2.70" x 1.38". Please check with Panduit to get the appropriate furniture bezel size that'll fit the knockout size on our plate. Thank you

Hi, 30TP-AP would contain the ceiling hardware. If you are also looking for the bottom "boot" for the base of the pole that is part number E30-212. Thanks,

Hello Bruce, Standard keystone style jacks from most manufacturers fit the smaller knockouts on the communication plate. The rectangular knockout on the same plate fits a modular furniture bezel. Knockout size for the modular furniture bezel measures 2.70" x 1.38". Thank you

Hi Jim, You can use a blank pole and field punch KO's for a furniture feed. Thanks,