



CordMate III Cord Management Kit - White
C310
Wiremold
CordMate III Cord Management Kit - Black is rated
out of
5 by
2.
Bazaarvoice SAP Hybris Integration Version 2.8.1
CordMate III High Capacity Cord Cover Kit is perfect for hiding larger bundles of home entertainment cabling, speaker wires, TV/video cabling and home office wiring. Peel and press backing makes for easy installation. Hinged lid allows easy access to cables. Stylish design complements any interior setting. White/ Paintable.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Ideal for concealing multiple low-voltage cords, wires and cables
- Suitable for covering home entertainment wires, speaker cables, TV/video cabling and home office wiring
- Paintable with latex-based paint
- Large capacity
- 2 flat elbows, 1 inside elbow, 1 outside elbow, 2 coupling/exit fittings and 1 ''T'' fitting included
Specifications
General Info
Color | White | ||
Type | Raceway | ||
Application Sector | Residential | ||
Product Line | Wiremold | ||
Country Of Origin | United States | ||
Standard | Raceway is not NRTL Listed and is only designed for use in protecting electrical cords and low voltage wiring and cabling. | ||
UPC Number | 086698001697 |
Buy American Act Compliance
NAFTA | Yes |
Additional Information
RoHS Compliant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. |
Resources
Cutsheet
Installation Instructions
Reviews
Rated 3 out of
5
by
Christian from
Needs to be just a little more thought out
It may seem trivial to most, but it is a huge issue for my circumstance that there is no 45 degree outside (or inside or regular wall side) elbow. I am okay with it not being included (those types of parts are never adequately supplied in a single order, anyway), but the fact that it does not exist, at all, is very upsetting. I bought this to avoid that jury-rigged look, but I guess for anything but the most standard configuration cordmate can do no better than a jury rigged look. Still a good kit for the price.
Date published: 2024-10-26
Rated 3 out of
5
by
Mike H. from
Great capacity!
I agree 100% with Christian, this is a great solution for hiding cables if only on one side of the TV wall. but with 7 cables 3-left 4-right you need twice the hardware you get in the kit. You can't buy any extra fittings from here or anywhere else. you have to buy another kit. $40.00, thank you very much! yes I will recommend, with advice!
Date published: 2024-11-10
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
I don't know what it's called but I want to transition from the end of a section of Cordmate III to a hole on the wall. It's a tapered box, like a reducing coupler. I have used them in other brands of raceway, but am now doing a job with Cordmate III.
Hi,
You can take a look at 2986-WH and see if that would work for you.
Thanks,
Date published: 2023-11-25
I am interested in the CordMate III Cord Management Kit but i need extra part from ther kit and I can't see any place that sell extra parts. I need 90 degree inside and outside wall corner. Can you point mt in the good direction for that please?
Hello,
The 90 degree inside corner is 2917-WH and the outside corner is 2918-WH. These components can be ordered through a Wiremold retailer or electrical distributor.
https://www.legrand.us/where-to-buy/shop-local/?ps-sku=P001
Thank you,
Date published: 2023-09-05
Is there a part list for all the parts for the Cordmate III kit? If not, what is the part number for the inside corner? I had 12 of these kits bought for 12 different rooms and one kit was missing the inside, outside, & 2 flat elbow package.
Hello Ricky,
The Cordmate III kit consists of the following part numbers and quantities.
2911-WH (Qty 2),
2917-WH (Qty 1)
2918-WH (Qty 1)
2906-WH (Qty 2)
2915-WH (Qty 1),
2910B-WH (Qty 2)
Four of the straight channel lengths are also included in the kit.
Thank you!
Date published: 2023-09-02
What is the part number for T fittings for the CordMate iii system and where can I purchase the extra T fittings
Hi,
The T that would work with that is 2915-WH.
See attached link and use the following steps to locate an authorized Legrand distributor. To locate distributors in your area, please click on the link below, choose DISTRIBUTOR from the drop-down menu under WHERE TO BUY, and WIREMOLD under BRAND NAME. If your location is not automatically displayed in the search field, enter you zip code and click on the magnifying glass (search). The page will then display a map and a listing of all the distributors near you.
https://www.legrand.us/where-to-buy/shop-local/?ps-sku=P001
Thanks,
Date published: 2023-03-17
Is there a recommendation for a round junction box for mounting smoke alarms to, that will accept Cordmate III?
Please disregard the previous response. Here is the correct response:
Unfortunately, we do not offer a round box for mounting smoke alarms to that will accept the Cordmate III. You may call 844-957-3783 and select option 2 for Wiremold and then select option 2 for Technical Support to discuss your needs in further detail.
Date published: 2023-02-14
Have temp romax run in garage fr brkr box to plug (repl non wrkg in wall). Want to avoid mtl conduit. I purchased Cordmate iiiC35. Why can't it be used to extend permanent hardwired lines ? We'd use typ Romex.
Hello,
The C310 is a cord cover only, it is not UL tested or rated for power wiring. Please give us a call for alternative options for your application. Wiremold Technical Support can be reached at 844-957-3783, option 2 for Wiremold and 2 for Technical Support.
Thank you,
Date published: 2023-02-07
Is there a drop ceiling fitting/cover that works with the 310? Something like Panduit SKU DCF5IW-X?
Hi,
Part number is 2986-WH.
Thanks,
Date published: 2023-01-24
What boxes are to be used with the Cordmate 3
Hi Jeff,
The Cordmate III uses the NM2048 or NM2044 device boxes. They are also available in 2-gang options. The link below will provide the full spec sheet with compatible parts. The Cordmate III is the same as our 2900-WH series.
https://legrand.webdamdb.com/directdownload.php?ti=55654545&tok=NtS7RomkuRIlmrK2hmuWzwRR
Thank you,
Date published: 2023-02-03
Can i buy an outside corner for the chord mate iii? If so, can I buy it direct from you? I have searched Home Depot and Amazon and have not found one large enough to work!
Hello,
Yes, an outside elbow is available for Cordmate III. Our part# is 2918FO-WH.
See attached link and use the following steps to locate an authorized Legrand distributor.
To locate distributors in your area, please click on the link below, choose DISTRIBUTOR
from the drop-down menu under WHERE TO BUY, and WIREMOLD under BRAND NAME.
If your location is not automatically displayed in the search field, enter you zip code and click
on the magnifying glass (search). The page will then display a map and a listing of all the distributors near you.
https://www.legrand.us/where-to-buy/shop-local/?ps-sku=P001
Thank you!
Date published: 2022-10-14
What are the differences between cordmate ii and iii?
Hello,
The Cordmate II is a smaller profile, 1" x 1/2". The Cordmate III is 1 1/2" x 3/4".
Thank you
Date published: 2023-11-09
Is there an end cap for the cordmate 3 series?
Hi Joey,
The blank end fitting is part number 2910B-WH.
Thank you,
Date published: 2022-04-21
Are 45 degree elbows available for the flat and the inside corner?
Hi Pat,
We offer standard 90° fittings for the Cordmate III system. Since it is a low voltage cord cover other angles can be cut on site to achieve the desired angle without voiding any UL listing.
Date published: 2022-03-29
Where can I buy on line just the individual Cordmate III flat elbows. Need 10 of them. All I can find is the accessory packs where I will just throw away many other pieces
Hello Gloria,
Thank you for your inquiry. 2911-WH is the individual part# for the Cordmate III flat elbow. This elbow can be purchased through an electrical distributor in your area.
See attached link and use the following steps to locate an authorized Legrand distributor.
To locate distributors in your area, please click on the link below, choose DISTRIBUTOR
from the drop-down menu under WHERE TO BUY, and WIREMOLD under BRAND NAME.
If your location is not automatically displayed in the search field, enter you zip code and click
on the magnifying glass (search). The page will then display a map and a listing of all the distributors near you.
https://www.legrand.us/where-to-buy/shop-local/?ps-sku=P001
Feel free to contact us direct with any additional questions. We can be reached at 1-844-957-3783. From the main menu choose option 2 for Wiremold followed by option 2 for Technical Support.
Thank you for your interest in Legrand products.
Date published: 2021-12-02
Is there an ivory or beige version of this?
Hello Cabby,
Yes, there is an ivory version which is part of the 2900 family. 2900 is a 6ft length in ivory. It's also available in an 8ft length (part# 2900L8). Other parts are available separately.
Please reference the attached link to the cutsheet from our website.
https://legrand.webdamdb.com/directdownload.php?ti=55654545&tok=NtS7RomkuRIlmrK2hmuWzwRR
Feel free to call us direct with any additional questions. We can be reached at 1-844-957-3783. From the main menu choose option 2 for Wiremold followed by option 2 for Technical Support.
Thank you for your interest in our product.
Date published: 2021-11-29
Are there extra tees and elbows available?
Hello John M,
Yes, tees and elbows are available as separate catalog items. Tee part# is 2915FO-WH and depending on which elbow is required we offer a flat 90, inside 90 and outside 90 as options. Part numbers for each are 2911FO-WH (flat 90), 2917FO-WH (inside 90) and 2918FO-WH (outside 90).
For additional product questions please feel free to reach out to us direct at 1-844-957-3783. From the main menu choose option 2 for Wiremold followed by option 2 for Technical Support.
Thank you for choosing Legrand!
Date published: 2021-12-02
Bazaarvoice SAP Hybris Integration Version 2.8.1