Flat Screen TV Cord and Cable Power Kit
CMK70
Wiremold
Flat Screen TV Cord and Cable Power Kit is rated
out of
5 by
3.
Bazaarvoice SAP Hybris Integration Version 2.8.1
Tidy up your entertainment system with this power kit that features a pre-wired design for easy installation. All the tools you need to conceal cables for a neat appearance are included. No Electrical termination required: Plug and Play. The easiest solution for running flat screen TV power and low voltage cables in-wall. Kit includes 'plug and play' power harness and also allows you to run low voltage cables such as HDMI cables and other component cabling in the wall and out of sight - no electrician or hard-wiring required.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Simple installation: Do-it-yourself kit allows for neat and easy installation in under 30 minutes with no electrician or hard wiring involved.
- Pre-wired all inclusive kit: All parts and tools needed for installation are included in the kit, including a pre-wired power cable.
- Hide low voltage cables: Perfect for hiding low voltage cables such as HDMI and other component wires.
- Kit Includes: 2 power grommets with a 54'' harness, 6' power cord, hole saw and fish tape.
- This product meets the material restrictions of RoHS.
Specifications
General Info
| Type | Raceway | ||
| Application Sector | Residential | ||
| Product Line | Wiremold | ||
| Country Of Origin | China | ||
| Standard | cETLus Listed | ||
| UPC Number | 086698000508 |
Listing Agencies / 3rd Party Agencies
| ETL Listed | Yes | ||
| ETL ListingNumber | G100409220CRT-001 |
Additional Information
| RoHS Compliant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. |
Resources
Cutsheet
Installation Instructions
Reviews
Rated 3 out of
5
by
Joe D from
Now that it’s done I love it, but a pain to instal
I love that I was able to install myself and achieve the look I wanted. But this was a pain to install. They make it look easier than it is in the instructions and video. It took about 50 tries to get the wire fed from one hole to the other. Not an easy task when there is insulation in the wall. And one thing that wasn’t mentioned in the instructions, but I was reminded in installation, is that your outlets likely have horizontal wires that attach one to the other. I wasn’t real comfortable feeding the wires across that. I purchased two sets of these, but I’ll be taking my second set back as that room has paneling and these don’t install into paneling. It would be easy to include an adapter for paneling. It’s something you should think about doing.
Date published: 2020-04-27
Rated 5 out of
5
by
Johan from
Perfect for wall mounting a TV.
Finally decided to mount my TV to the wall. Unfortunately, I learned the hard way that I have plaster walls. This made installation a huge hassle. Because of this, I found the hole-saw that came with it useless for this, as it wasn't good enough to get through that much material - even when coupled with a hammer drill. I ended up using two additional hole-saws for my application, but that is not the fault of this kit. If I had drywall this would have been much more simple and could probably have used the included hand hole-saw.
After getting past those issues, this kit was perfect for running in-wall power and hiding a few HDMI cables. I also painted the rings to match the color of the wall.
Date published: 2018-06-19
Rated 1 out of
5
by
Cashaffer21 from
Overall great concept, initially a pain to install
I initially bought this product due to the “ease” of installation boasted on the packaging. Everything was going great until it came time to fish the power cord through the holes I cut. (At this point I was committed, so no going back.) The first difficult task I encountered was getting the supplied fish tape fed through the hole to line up and come out the other end. An exterior wall with insulation poses quite the obstacle. After several attempts I successfully retrieved the fish tape (I had to fit what I could of my hand through the hole to blindly feel for the fish tape) and inserted the power cord onto the hook of the fish tape. As I pulled the power cord through the hook became straightened and released the power cord. Now I had to retrieve a half fed power cord through one end and the damaged fish tape through the other. Attempt #2: I successfully fed the fish tape through, same issue as before, connected the power cord to the the hook, but this time I used twist ties to assist keeping the power cord and hook together. As I retrieved the fish tape I could feel the insulation pulling, tearing, and bunching up inside my wall. Just as the fish tape neared the exit hole the hook broke. Lucky for me the cord was there and I pulled the line through. Now I needed to pull my HDMI cords through, but thanks to the bunched up insulation in my wall I cannot get the fish tape fed from one hole to the other. Frustrated and 1.5 hours in on a .5 hour project I gave up. Time to re-engineer this concept and find a way to be able to watch TV with a successful wall mount sans exposed cables. Concept = 5 stars. Ease of installation = 1 star!
Date published: 2019-02-24
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Hello. Is this product NEC certified?
The CMK70 is Listed by ETL (Electrical Testing Laboratories, Inc.). ETL is a third party
certifier and is an OSHA Nationally Recognized Testing Laboratory (NRTL), same as UL.
The CMK70 kit was designed to comply with the National Electrical Code (NEC). However, local codes may vary. Please consult with your local electrical inspector regarding compliance with the local code. If you or the inspector still have questions, please contact Legrand-Wiremold Technical Support at 1-800-621-0049 for further assistance.
Date published: 2020-12-30
The six (6') power cord that plugs into the bottom module. What is the gauge? I would like to replace with one (1") power cord to show less cord. But I want to make sure not to go under gauge.
Hello, I apologize for the delayed response. The cordset provided is 14AWG.
Date published: 2020-12-10
Hello, I have the Legrand - In-Wall TV Power Kit - White (Model:HT2202-WH-V1) installed however misplaced the external power cord. Where can i buy just the power cord? Thank you
Hi, thanks for reaching out. Please reach our customer support team and they can send you a replacement power cord. Thank you!
1-800-223-4162, Option 2
Fax: 800-223-4196
Mon - Fri: 8am - 6pm EST (excluding holidays)
Date published: 2020-12-10
I have installed dozens of these, love them, but now I have dozens of T handles and pushrods, what type of plastic are they made of, and can they be recycled? Thanks.
The T-handle, the fish stick connectors, and hook are all made from ABS, and the sticks themselves are made from PVC. Both are recyclable but it may depend on regional recycling on what is accepted. ABS is considered a #7 plastic - and PVC is considered a #3.
Since you install many of these there is a version available on Amazon that does not come with the fish sticks or T-handle, part number is ZKT101.
Date published: 2020-12-09
I want to add an additional HDMI cord through, is this possible without uninstalling?
Hello,
To install additional cables it would require the unit be disassembled to provide sufficient room to pass the new cable in from the top and our through the bottom. With the grommets still attached to the wall it would be very difficult to get the new cable in and pass through to the bottom.
Date published: 2020-11-23
When uninstalling this unit in my old house to bring to our new place, I accidentally unfastened the screws too far and lost some of the tabs into the wall. Is it possible to get more of the tabs without buying a complete kit?
Hello,
We will be able to send some new wings out to you. Please send the request via email to retail.wm@legrand.us, and provide the part number, contact information, and mailing address.
Date published: 2020-11-23
I need additional length of low voltage wiring. Is it available?
Based on the product category I'm not confident I fully understand your question. Please call us at 1-800-621-0049 and choose option 3 from the main menu for technical support. Thank you!
Date published: 2020-06-25
Hello i wanted to know if it is possible to unlock the wall grommet locks so i can turn the bottom wall grommet right side up and tighten it back down thanks.
Yes. Pry off the snap-on trim ring, loosen the screws, pull out and rotate the assembly, tighten the screws, and snap the ring back on.
Date published: 2020-06-21
Will this work with a Samsung right angle power cord?
Good question! Yes, it will. BUT...Samsung is now using a “sideways” right angle plug on some TV’s, which is not compatible. You can identify it by the cord entering the side of the plug. The workaround is buying a compatible right angle cord on Amazon.
Date published: 2020-06-21
In trying to install on a paneled wall. Do you make adapters for paneling? I can see how different clips would make this possible.
The CMK70 Power Kit is designed to fit into walls constructed of a minimum of 2" x 3" studs and 1/2" inch drywall. We do not offer adapters for other wall types.
Date published: 2020-04-27
is there an adapter I can use if the tv plug doesn't fit?
Unfortunately, there is not.
Date published: 2020-01-27
Is this model compliant in New York City?
The CMK70 kit was designed to comply with the National Electrical Code, NFPA70.
However, local codes may vary. Please show this FAQ to your local inspector. If after
reviewing this FAQ your inspector still has questions please contact Wiremold Technical
Support at 800-621-0049 option 3, for further assistance. Here is a link to the FAQ for the CMK70, you may have to copy and paste it in your browser.
https://www.legrand.us/-/media/products/resources/wiremold-products/at-home/hide-organize-cords/power-kit/wiremold_cmk70_faq.ashx
Date published: 2019-12-06
I recently moved into a home with this installed, however we would like to move locations. Are there any instructions on how to re-locate? Appreciate any help, and if it is easy might do these in all the rooms of my home.
If you are able to remove all the components of the CMK70 from the existing location undamaged, then you can re-install them in another location following the installation instructions that come with a new unit (link below). However, we do not have actual instructions on how to un-install an existing CMK70. If you need assistance in doing that, please contact Wiremold Technical Support at 1-800-621-0049, option 3. We can you help you with questions about the removal process.
https://www.legrand.us/-/media/products/resources/wiremold-products/at-home/hide-organize-cords/power-kit/1010497r2.ashx
Date published: 2018-08-30
I have this grommet kit but unable to lock the grommet in my walls. I have double dry wall in my high rise condo and it is unable to stay in place. Do you have any suggestions?
It's possible that wall is simply too thick and the tab that holds the grommet in place gets past the point where is held captive. When that happens, the tab will just spin around and will not lock in place. That usually happens if your wall is thicker than about 7/8".
Date published: 2020-06-20
Will this product work in an exterior wall that has spray foam insulation?
Exterior walls with insulation may require removal of some of the insulation within the wall cavity to prevent accessibility issues. For additional installation details please reference the attached instructions.
Date published: 2018-04-06
Bazaarvoice SAP Hybris Integration Version 2.8.1