text.skipToContent text.skipToNavigation

adorne® 700W sofTap® Tru-Universal Dimmer, Graphite, with Microban®

adorne 700W sofTap Tru-Universal Dimmer with Microban is rated 4.7 out of 5 by 42.
  • y_2024, m_6, d_23, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_11, tr_31
  • loc_en_US, sid_ADTP703TUG4, prod, sort_[SortEntry(order=HELPFULNESS, direction=DESCENDING), SortEntry(order=POSITIVE_FEEDBACK, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_legrand
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 9ms
  • REVIEWS, PRODUCT

$88.14 USD

Turn lights on or off, or even dim them, with just a soft tap of a finger thanks to inventive micro-movement technology. Plus, as a Tru-Universal Dimmer, this dimmer switch self-calibrates to work with virtually any 120V dimmable bulb or fixture (excludes 0-10V). Always adjust to the precise light level you want, without the flicker.

This dimmer* features enduring Microban® antimicrobial technology that works to reduce the growth of bacteria, around the clock, for the lifespan of the product.

* Existing inventory of switches, dimmers and plastic wall plates from the adorne® Collection at some partner locations may not yet include Microban® protection. To confirm that a specific Legrand product is protected with Microban®, check that the exterior of the product packaging includes a green dot or a "Protected with Microban" label.

Made exclusively for use with screwless Wall Plates from the adorne® Collection, sold separately.

No antimicrobial efficacy claims are being made or are valid with respect to products sold in Canada.

Color Graphite
  • Free shipping on orders over $49 & free returns

Quantity

In Stock

Add To Cart Button Ready

Where To Buy
  • Send
  • Save as PDF
  • Add to favorites Remove from favorites

Features

  • Helps fight the growth of stain and odor-causing bacteria through the invisible and continuous product protection of Microban® antimicrobial technology
  • For complete installation, device must be paired with an adorne® screwless Wall Plate (not included). Available in a range of contemporary colors and stunning finishes.
  • Installs in 15 minutes or less, fitting into an existing electrical box; neutral wire required.
  • Perfect for adding precise light level control – all it takes is a soft tap to turn on/off or adjust brightness.
  • Works with virtually any 120V dimmable bulb or fixture (excludes 0-10V).
  • Self-calibrates when you select your fixture's lighting type, automatically setting the appropriate minimum voltage to eliminate flicker and poor performance.
  • Usable in both single-pole and 3-way applications.
  • More color options available to fit any style, including finishes to match current hardware and lighting trends.

Specifications

General Info
Product Line Pass & Seymour
Color Graphite
Finish Frosted
UPC Number 785007233919
Country Of Origin China
Features Antimicrobial Protection, Indicator Lights
Switch Type sofTap
Number of Switches 1
Application Sector Residential
Warranty Type Limited Lifetime Warranty
Type Dimmer
Dimensions
Product Width US 1.79 in
Product Depth US 1.77 in
Product Height US 4.2 in
Technical Information
Electrical Rating 120V 1600VA (MLV), 120V 16A (Fluorescent), 120V 450W (CFL), 120V 450W (LED), 120V 5A (Fan Control), 120V 700W (ELV), 120V 700W (Halogen), 120V 700W (Incandescent), 120V 8A (EFL)
Number of Gangs 1
Bulb Compatibility CFL, Fluorescent, Halogen, HID, Incandescent, LED, Universal, Xenon
Number of Poles Single Pole 3-Way
Indoor/Outdoor Indoor
Wattage 700 W
Mounting Type Box
Voltage 120.0 V
Connection Type Internal Pressure Plates

Reviews

Rated 5 out of 5 by from Dim lighting I am so happy with the soft top dimmer switch that I had got last week the dimmer is very easy to use. There was no need for a professional installation as the instructions were very clear it actually worked on the first try, Something I’m not that familiar with After using it I plan on going buying more for my downstairs game room and are outside party room. It’s certainly can set the mood for whatever occasion with a push of a button
Date published: 2018-10-25
Rated 5 out of 5 by from Dims beautifully, no flicker Bought “regular” LeGrande paddle dimmers and they dim great and look beautiful, but with some of our LED lights there was a flicker. Switched to the soft tap true universal and they dim to almost off and no flicker at any light level. Love how they dim to off for an elegant effect.
Date published: 2019-03-31
Rated 5 out of 5 by from These switches are awesome! I replaced all the switches and outlets in my house to legrand adorne and I looks fresh and modern! What a difference!
Date published: 2018-04-04
Rated 5 out of 5 by from GORGEOUS These are beautiful and functional. I am doing a whole home remodel and I have put Legrand switches and dimmers in every room. They are so clean and stylish, and they bring a really nice polished touch to every space. Fan for life!
Date published: 2018-08-12
Rated 2 out of 5 by from Love the Look- still needs work on the value Love the look and design of the switches. Don’t like how the dimmer has a dim (no pun intended) locator light vs. the regular switch- which isn’t visually appealing and super irritating considering the price. Looks really bad on a 2+ gang switch when they are right next to each other. Also- my tru universal won’t turn on my LED pendants unless it starts on the highest power vs. the lower end. So much for versatility. Once again as many reviewers expressed- at this price point- we demand perfection and flawless execution as there’s nothing out there more expensive. GET IT RIGHT!
Date published: 2020-02-03
  • y_2024, m_6, d_23, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_11, tr_31
  • loc_en_US, sid_ADTP703TUG4, prod, sort_[SortEntry(order=HELPFULNESS, direction=DESCENDING), SortEntry(order=POSITIVE_FEEDBACK, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_legrand
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 10ms
  • REVIEWS, PRODUCT

Questions & Answers

I have an older home built in 1978 and the single light I wish to use this dimmer with has hot, neutral and ground wires only. The light is LED and specified ELV only which I believe is supported by this model. I have not been able to successfully wire it

Asked by: Will
I posted this question. I found the neutral and I connected  according to specifications, and I could never get it to function at all even after trying the tweaks listed on the installation pdf. I gave up and went to Lutron which worked fine right out of the box. What drew me to this line was the pop out three plug outlets and I have no problem with any of these. Since the dimmer is already out of the box, I’m sure my vendor won’t take it back so I will leave it for the trustees of my trust to throw out after I’m gone. Kind of left me with a bad test in my mouth for their products, but I’m done with my renovation and in six months morning remember this 
Answered by: Will
Date published: 2022-09-19

Is it normal to feel warm when dimmer is off? I have one ADTP703TUW4 alone and it is cool. But in another electric box there are two ADTP703TUW4 side by side, they are warm to touch no matter on or off. My room temp is 72F. Those warm dimmers are 107F.

Asked by: Ryan
The electronic dimmers will generate more heat when ganged together in the same box. It is normal for them to feel warm, even when off because of the built-in electronics. The allowed maximum temperature by UL is 140F. adorne products 1.844.957.3783 opt 1, opt 2 Mon - Fri: 8am - 6pm EST (excluding holidays) Email Us - tech.support@legrand.us
Answered by: Legrand Technical Support
Date published: 2022-12-18

I have some lights permanently plugged into an outlet that is controlled by a switch. Could I wire the dimmer to the outlet to dim the lights?

Asked by: JHenderson
You cannot do so and maintain code compliance. A receptacle should not be run via a dimmer.
Answered by: Wiremold Tech Support
Date published: 2024-03-08

Will the Legrand universal dimmers work with Cree LED medium base A19 lamps?

Asked by: Gimidlin
The ADTP703TU universal dimmer should work as long as the Cree LED's are "dimmable".
Answered by: Legrand Technical Support
Date published: 2022-03-11

I have softap dimmers on lights containing magnetic transformers with MR16 led bulbs, 12w. When the power goes out and the home is re-energized the breaker (15a) trips. What causes this. They worked for 3 yrs.

Asked by: Gabe
Please contact Technical Support directly for assistance with your dimmers: adorne products 1.844.957.3783 opt 1, opt 2 Mon - Fri: 8am - 6pm EST (excluding holidays) Email Us - tech.support@legrand.us
Answered by: Legrand Technical Support
Date published: 2022-03-01

What is the boot up procedure that the switch goes through when first powered up? I hear several clicks and dimmer lights cycle up/dn. Does it power up the lights a time or two or three before it settles down?

Asked by: Gabe
The universal dimmer will self-calibrates to your lights when power is restored, automatically setting the appropriate minimum voltage to eliminate flicker and poor performance. The dimmers will perform this sequence after power is applied (installation, power return after a blackout, circuit breaker resets) and takes about 30-40 seconds. After the dimmer performs the above initialization, it will perform as specified in the previous sections of this document.
Answered by: Legrand Technical Support
Date published: 2022-02-21

I need to for this dimmer to work in a 3 way setting. Which adorne switch is compatible and does the 2nd switch need to run off the same neutral?

Asked by: Joe
This dimmer will work with any 3way switch. If you use one of the adorne electronic switches(Softap, Touch or Wave), the switch would need to be on the HOT side of your 3way and the dimmer would go on the LOAD side. The switch does not require a Neutral.
Answered by: Legrand Technical Support
Date published: 2023-02-21

Im using DTTP703TUW4 dimmer switch with magnetic driver and it wouldnt work. It powers up and shuts down. is it compatible? or I need some switch which is compatible with magnetic driver? Thanks

Asked by: Leo K.
The universal dimmer is rated for both Magnetic and Electronic drivers. Make sure you have a Neutral connected to the dimmer and if it still doesn't work, contact Technical Support for assistance: adorne products 1.844.957.3783 opt 1, opt 2 Mon - Fri: 8am - 6pm EST (excluding holidays) Email Us - tech.support@legrand.us
Answered by: Legrand Technical Support
Date published: 2022-01-13

I just installed this sofTap dimmer switch and it turns on and off and dims as it should. It does, however, 'click' when I turn the switch on and off. What is causing this, please? Should I be concerned? Thank you.

Asked by: coomzee
The "click" is the opening and closing of the internal contacts, which is normal and you should not be concerned.
Answered by: Legrand Technical Support
Date published: 2021-12-14

Installed this with WAC InvisiLED Pro2 24v (LED-TX24) tape light/ WAC 96 Watt Dimmable Power Supply (EN-24100-RBT2-T). Even after setting to low level trim, the lights flash when dimmed. Is there a minimum load for these dimmers? Other suggestions?

Asked by: Powers
The universal dimmer has a 6W minimum load required and for WAC lighting(ELV), the dimmer should be put into Reverse phase.(see User Adjustments section on attached instruction link) https://legrand.webdamdb.com/directdownload.php?ti=55646800&tok=GcNt2dYl9SpC4XAf0iSV9gRR
Answered by: Legrand Technical Support
Date published: 2021-07-09

Im replacing a lutron 3way with a legrand ADTP703TUG4. The wall has 4 wires. (black, white, red and bare). The switch has sockets for hot, neutral, 3 way and pole? what goes where? the diagram doesnt help

Asked by: Skim
Hello, When installing this Legrand dimmer in a 3-way it has to be installed on the load side and the switch needs to be on the line side. We are not able to identify the wires in the wall just what wires need to be connected on the back of this dimmer. Ground wire goes to green, Neutral wire goes to white, Hot goes to black, 3-way and 1 pole need to be matched up between the dimmer and switch. Please contact us at 844-957-3783 if you have any other questions. Thank you,
Answered by: Wiremold Tech Support
Date published: 2022-01-21

I'm currently using the adorne® 20A 4-Way Paddle™ Switch ASPD2042G4 pairing with 02 Adorne 3-Way Paddle Switches. Can I replace one of the 3-Way Paddle Switches by 01 adorne® 700W sofTap™ Tru-Universal Dimmer ADTP703TUW4?

Asked by: PlKa
Yes, either one 3way switches can be replaced with the dimmer.
Answered by: Legrand Technical Support
Date published: 2024-01-03

I just completed a complete remodel of my Kitchen. I used all Adorne Legrand devices. I am controling my LED undercounter lighting with a soft tap universal dimmer. My Kicher undercounter lighting is buzzing. did not buzz with conv. dimmer

Asked by: Buddy
The Softap dimmer may need to be adjusted for the under cabinet lights you are controlling. If they are ELV(electronic low voltage), you need to put the dimmer into reverse phase. These steps are included with the dimmer instructions: SP/3Way true universal dimmer phase settings….FORWARD or REVERSE: You need to be in the minimum trim level adjustments to change the dimmer phase. To enter Min Level Trim: Hold Rocker button down for approximately 10s after minimum brightness reached. Bargraph LEDs will turn on to indicate cal mode activated. Releasing button within 5 seconds activates automated Min Level Trim feature as described in Initial Turn-on section below. Continuing to hold button for approximately 5 more seconds causes the +/- LEDs to flash, and initiates manual calibration. (basically hold for approx 15 secs until the +/- start flashing) Forward or Reverse Phase Selection Forward Phase is the default as shipped from factory. During manual Min Level Trim, holding On/Off button for approximately 10s toggles between Forward and Reverse Phase. The LED flash rate during calibration is approximately 1Hz for Reverse Phase, approximately 3Hz for Forward Phase. FORWARD phase – FAST blink REVERSE phase – SLOW blink
Answered by: Legrand Technical Support
Date published: 2022-01-27

I have an ADTP703TUW4 in my bathroom that had been working great, but it has stopped retaining the LDL (last dim level), so whenever I turn the light on with the On/Off pushbutton it turns on on the lowest dimming setting. How can I fix this?

Asked by: soravia
I would try resetting the breaker to the dimmer to force it to recalibrate it's settings. If that does not correct it, contact Technical Support for further assistance. adorne products 1.800.223.4185 opt 3 Mon - Fri: 8am - 6pm EST (excluding holidays) Email Us - tech.support@legrand.us
Answered by: Legrand Technical Support
Date published: 2021-01-03

Will this switch ADTP703TUM4 dim this light? https://www.lumens.com/geos-led-flushmount-by-dweled-uu572078.html I've got your paddle dimmer installed and it flickers. Thanks

Asked by: Byron
Yes, the ADTP703TUM4 is rated to handle ELV loads, where the Paddle dimmer is not. This is from the Lumens spec sheet for your light: Dimmable When Used With a Electronic low voltage (ELV) Dimmer (Not Included)
Answered by: Legrand Technical Support
Date published: 2020-10-06

Does this dimmer REALLY work with standard 110 VAC 6W LED bulbs? I have several of your LED dimmers that will only reduce the brightness of the LED bulbs to about 75% of full brightness - not very much.

Asked by: davchr
The universal dimmer is designed to dim to approximately 3% of your light load but also depends on the low end restrictions of the LED bulb. Some only dim to 10%.
Answered by: Legrand Technical Support
Date published: 2020-06-25

Can you use with ceiling fan light?

Asked by: River74
You should look into AAFN4S16AM4 see https://smhttp-ssl-40934.nexcesscdn.net/pdf/adorne-Install-AAFN4S16A_340966.pdf
Answered by: JoeTex
Date published: 2020-04-21

Can this be used as a 3-way switch with dimmers on both sides?

Asked by: New home
Not very well.  I have two 3way switches and the work sporadically.  Usually have to reset at main switch.  
Answered by: Thaney
Date published: 2023-07-01

I have a sofTap dimmer with two chandeliers with 38 pieces beach one 6w LED dimeable bulbs. It is getting hot. Why is the reason?

Asked by: Rodrigo
I suggest you contact an electrician to figure that out.  I am a homeowner that used the legend products and we love them with no issues.  
Answered by: OCshopper
Date published: 2021-02-02

The light fixture I am installing requires a 1-10v dimmer. Will this dimmer works?  

Asked by: angry chef
The universal dimmer is not designed to handle 0-10V fixtures. Here are our available options in Magnesium: https://www.legrand.us/search.aspx?q=adpd4fbl3p2m4 https://www.legrand.us/search.aspx?q=adtp4fbl3pm4 https://www.legrand.us/search.aspx?q=adth4fbl3pm4
Answered by: Legrand Technical Support
Date published: 2020-02-19

Will this dimmer work with the following Commercial Electric LEDs? https://www.homedepot.com/p/Commercial-Electric-Ultra-Slim-6-in-New-Construction-and-Remodel-Color-Selectable-Canless-LED-Recessed-Kit-4-Pack-91365/306079856

Asked by: BRudy
Yes, the universal adorne dimmer is designed to work with this type of LED recessed fixture.
Answered by: Legrand Technical Support
Date published: 2020-02-05

Hi - I'm using this dimmer (ADTP703TUW4) with a regular 3-way softap switch (no dimmer). Can these be used in either the master or remote locations? I can get mine to work at first but then the softtap switch stops working after 4-5 pushes.

Asked by: John
When using True Universal Dimmer in a 3 way application, with an electronic switch (Soft Tap, Touch, or Wave), the HOT wire MUST be connected to the electronic switch, and the dimmer MUST be connected to the load. Reversing this wiring (HOT to Dimmer and LOAD to Switch ) will cause the switch to stop functioning. The switch requires 120 VAC to operate. When the voltage to the switch is lowered by using the dimmer, the electronics in the switch stop functioning. This only applies when using an electronic switch. A standard switch (Paddle, Push and Whisper, for example) is not effected.
Answered by: Legrand Technical Support
Date published: 2020-01-02

I have a 560 watt LED load, will this dimmer work with this load? I know a lot of dimmers I have looked at have a lower led threshold than incandescent and didn't know if the 700watt rating was across the board or incandescent only.

Asked by: Darron
The maximum wattage rating depends on what type of lights(LED's) you are controlling. Max. load rating: • Incandescent: 700W • MLV: 500VA • ELV: 700W • EFL: 5.5A • CFL and LED: 450W(screw in bulbs)
Answered by: Legrand Technical Support
Date published: 2019-11-01

We have the dimmer Legrand ADTP703TUM4. Can we use wall plate Legrand AWM1G2MS4 for this dimmer ?

Asked by: Lidiya
Yes, AWM1G2MS4 is correct.
Answered by: Doug
Date published: 2019-10-01

My electrician just installed 7 of these in our home and they are all extremely hot to the touch (180+). 4 of them are running six 10w cans, the rest are lower loads (one just a single 10w can). Reverse phase setting helped slightly. Anything else to try?

Asked by: ce11
I would suggest contacting adorne Technical Support to go over the installation and possible adjustments that can be made to the universal dimmers. adorne products 1.800.223.4185 opt 3 Mon - Fri: 8am - 8pm EST (excluding holidays) Email Us - tech.support@legrand.us
Answered by: Legrand Technical Support
Date published: 2019-07-30

I have a soft tap dimmer set up in a 3 way with a whisper switch at another location in a 3 way. The lights do not come on at all. I've installed according to the manual, do I need another dimmer switch on the other end for this to work?

Asked by: Luke N
The Softap dimmer is designed to be used with any 3way switch(not dimmer) for a 3way application. I would suggest contacting adorne Technical Support to try and troubleshoot your installation issue. adorne products 1.800.223.4185 opt 3 Mon - Fri: 8am - 8pm EST (excluding holidays) Email Us - tech.support@legrand.us
Answered by: Legrand Technical Support
Date published: 2019-07-30

Can the dimmer be paired with a wave switch for a three-way set up? Thank you.

Asked by: Nick
The Softap SP/3W dimmer can be used with any 3way switch but seeing the Wave switch is electronic, the following applies: When using True Universal Dimmer in a 3 way application, with an electronic switch (Soft Tap, Touch, or Wave), the HOT wire MUST be connected to the electronic switch, and the dimmer MUST be connected to the load. Reversing this wiring (HOT to Dimmer and LOAD to Switch ) will cause the switch to stop functioning. The switch requires 120 VAC to operate. When the voltage to the switch is lowered by using the dimmer, the electronics in the switch stop functioning. This only applies when using an electronic switch. A standard switch (Paddle, Push and Whisper, for example) is not effected.
Answered by: Legrand Technical Support
Date published: 2019-06-17

Are the Adorne dimmers compatible with this LED Downlight?? file:///C:/Users/JHarrington/Downloads/RDL_4RND_9_CTS-97_Downlighting%20Dimmer%20Compatibility.pdf

Asked by: Johnh315
We have not tested our Softap universal dimmer with RDL-Topaz recessed downlights but with the dimmer's available adjustments(forward/reverse phase and high/low end trim) it should control them without issue. This is from RDL/4RND/9/CTS-97 spec sheet: Dimmable with leading-edge incandescent or LED style dimmers.
Answered by: Legrand Technical Support
Date published: 2019-03-27

I purchased serveral ADTP703TUM4 to operate my living room receseed lights, I currently have 15 Watt LED retrofit recessed lights, the new switch turns the lights on but they do not dim or even turn off? what are the specification of lights I need?

Asked by: Paul
The ADTP703TUM4 dimmer requires a separate Neutral wire so the dimmer can set itself to the load it's controlling and you need to verify that your LED's are "dimmable". The dimmer has a 6 watt minimum load requirement.
Answered by: Legrand Technical Support
Date published: 2019-08-31

can you use this dimmer with an led light with 0-10v dimmer wires

Asked by: scotty
This dimmer would not work for 0-10 volt. Instead you could use adtp4fbl3p. This model is only for 0-10 volt.
Answered by: Legrand Techincal Support
Date published: 2019-02-22
  • y_2024, m_6, d_22, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_54
  • loc_en_US, sid_ADTP703TUG4, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_legrand
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 53ms
  • QUESTIONS, PRODUCT

You may also like...