adorne® Locator Light
AALSL277
adorne Collection
adorne® Locator Light is rated
out of
5 by
31.
Bazaarvoice SAP Hybris Integration Version 2.8.1
$9.50 USD
Always find the switch with ease, even in the dark, with this convenient locator light. A great addition to any adorne switch or dimmer.
Voltage
277 V
- 125 V
- 277 V
Quantity
In Stock
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Specifications
General Info
| Color | White | ||
| Type | Switch | ||
| Finish | Matte | ||
| Application Sector | Residential | ||
| Product Line | Pass & Seymour | ||
| Country Of Origin | China | ||
| Features | Nightlight | ||
| UPC Number | 785007052978 |
Dimensions
| Product Depth US | 0.2 in | ||
| Product Height US | 4.4 in | ||
| Product Width US | 0.2 in |
Technical Information
| Connection | Screw Terminals | ||
| Connection Type | Internal Pressure Plates | ||
| Voltage | 277.0 V | ||
| Wire Size | #14 - #10 AWG |
Resources
Installation Instructions
Brochure
Supporting Document
Customer CAD PDF
Cutsheet
Reviews
Rated 5 out of
5
by
Anonymous from
Get this!
Not sure why this isn’t just included but I guess it’s cool to give the option to not use it if you don’t want to.
Date published: 2025-06-25
Rated 5 out of
5
by
Avi P from
Sophisticated beauty
This is a very subtle and niche product. One can argue this should be integrated, however, I was fine with its current setup since it's also practical incase one does not need it at all.
Date published: 2024-12-26
Rated 3 out of
5
by
Drew O from
MEH! Its just okay
The light sticks out way too far, they should have smaller ones that are half the size. Makes install into the box way harder than needed. For the price I’d expect the tolerances of such things to be more precise.
Date published: 2024-11-08
Rated 5 out of
5
by
Jesse Anderton from
Useful and easy to install
This light is easy to install and works well. We use just one on a panel with a few switches to point out the switch that turns on the main light for the room. The brightness is enough to easily see it, but not so bright it would interfere with sleep in a bedroom.
Date published: 2024-09-02
Rated 5 out of
5
by
Vinny from
Perfect light locator
Easy install, straight foward and works as it should, i kinda wish the switch had these pre installed so i didnt have extra wires in the box but its simple enough to do.
Date published: 2023-08-21
Rated 5 out of
5
by
Joseph C from
If you don’t have the dimmer and purchase a paddle
Must have for switches if you have a paddle switch or whisper switch
Date published: 2023-06-22
Rated 5 out of
5
by
Robert from
Must have addition
These small led lights make adorne switches to glow in the dark. They are a perfect must have addition to switches
Date published: 2022-11-18
Rated 5 out of
5
by
P&S from
easy to install
Great add on future and very easy to install
Date published: 2022-11-12
Rated 5 out of
5
by
R F from
The perfect touch!
These locator lights make it easy to find Adorne switches in the dark, yet are subtle and elegant looking. They are easy to install as well. I'm not sure why the switches don't come pre-lit, but if this is the look you want, at least they aren't too expensive relative to the cost of an Adorne switch.
Date published: 2022-11-08
Rated 4 out of
5
by
Jcas from
Expensive, but really good
Couldn't be easier to install and looks very beautiful. Could be cheaper.
Date published: 2022-09-24
Rated 5 out of
5
by
PM from
Excellent addition/
The light is subtle and exactly the right tone. Only negative is I wish it was a standard part of the switch built in rather than something you add on.
Date published: 2022-04-13
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
I notice that when I add a paddle switch and the gang plate along with the AALSL6 | adorne, that the paddle becomes really spongy and you don't hear the click and sometimes not even see the light...how do I make sure the AALSL6 | adorne is seated correctl
The light IS inserted too far. It's not impossible to do as I spent an hour swapping switches thinking one was faulty everytime I put in the locator. In fact the instructions or the locator light are faulty - they don't give the right info or the stick is actually too long. If you push the light-stick all the way in so the "bezel" of the light is touching the back of the switch housing (as you would expect to do) the light somehow touches something in the paddle switch and gets in the way so that the switch loses it's "CLICK" when turned on/off. Once the stick is backed out 1/8" or so the switch-click will come back. Hopefully the instructions for this product or the design will be revised - seems like it wasn't ever tested. PS - It's really really a nice feature, and well worth the couple bucks extra, just needs the kinks worked out.
Date published: 2024-11-08
The locator lights are dim in some of the switches I installed. What am I doing wrong?
The Brightness of the locator light can vary slightly based on the load being controlled. Feel free to contact tech support at 1800 223 4185 Option 1
Date published: 2018-11-19
The locator light in several of my switches doesn't go off all the way when the switch is activated...What causes this and how can I resolve it?
Thank you for your question regarding the installation of the adorne Status Locator Light(Model # AALSL6).
Here is the required wiring for each application:
Single pole - connect leads to HOT & 1POLE
3Way - connect leads to 1POLE & 3WAY
4Way - connect both leads to IN or both leads to OUT
adorne products
1.800.223.4185 opt 3
Mon - Fri: 8am - 8pm EST
(excluding holidays)
Email Us - tech.support@legrand.us
Date published: 2024-04-13
How do I install the locator status light with a 3 way or 4 way paddle switch?
Thank you for your inquiry regarding our adorne locator light. In a 3 way, the indicator light blue wires are going to go in the 1 pole and 3 way terminals. In a 4 way paddle, the blue wires will go into the either both of the in terminals or both of the out terminals. Hope this helps!
Date published: 2020-09-15
I installed the paddle switch with a night light and changed my light bulb to a LED bulb,the bulb flashed when the switch is off. But i removed the nightlight from the switch and stopped flashing. Anybody knows why? Anything I can do besides removing it?
Some LED lights are sensitive to the leak through current that illuminates when the switch is in the OFF position, where incandescent bulbs are not. You can try wiring the Locator lights leads to the 3way terminal and a neutral wire.
Date published: 2020-09-15
Bazaarvoice SAP Hybris Integration Version 2.8.1