LS Series CFL/LED/Incandescent Single Pole/3-Way Slide Dimmer with Single Pole/3-Way, 3-Speed De-Hummer Fan Control, Preset, Brown
LSCLDC163P
Pass and Seymour
Bazaarvoice SAP Hybris Integration Version 2.8.1
$40.94 USD
The industry's first CFL/LED dimmer with fan speed control works with select dimmable CFL/LED or incandescent lighting loads and features a sleek, sculpted ergonomic design for smooth, easy operation and precise control.
Quantity
In Stock
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Specifications
General Info
| Product Line | Pass & Seymour | ||
| Color | Brown | ||
| Finish | Matte | ||
| UPC Number | 785007040456 | ||
| Country Of Origin | China | ||
| Features | Combination, Fan Control, Locator Light | ||
| Switch Type | Push, Slider | ||
| Number of Switches | 2 | ||
| Application Sector | Residential | ||
| Standard | RoHS | ||
| Warranty Type | Limited Lifetime Warranty |
Dimensions
| Product Width US | 2.5 in | ||
| Product Depth US | 1.28 in | ||
| Product Height US | 4.19 in |
Listing Agencies / 3rd Party Agencies
| cULus Listed | Yes |
Technical Information
| Connection | Back and side wire | ||
| Contact Rating | 120VAC | ||
| Amperage | 1.6 A | ||
| Bulb Compatibility | CFL, Incandescent, LED | ||
| Number of Poles | 3-Way, Single Pole | ||
| Wire Size | #14 - #10 AWG | ||
| Wattage | 300 W | ||
| Mounting Type | Box | ||
| Speed Range | 3-Speed | ||
| Environmental Conditions | Indoor Only |
Resources
Cutsheet
Installation Instructions
Supporting Document
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Can I use a separate feed for the light and the fan? I only need the 3-way switch for the light and my 3-wire cable from the light/fan lands at the LSCLDC163PW switch, which only has a single feed for both. If so, can you provide a wire diagram?
The LSCLDC163PW dual controller is only rated and designed for use with one HOT line for both light and fan.
Date published: 2024-10-06
Is this or can it be illuminated/lighted or have an led locator? Thank, Jay
You can add the Snap-in Light Module to illuminate when it is OFF:
TM8LMCC8
https://www.legrand.us/search.aspx?q=TM8LMCC8
Date published: 2024-05-31
Does the maximum LED wattage of 150W mean the rated incandescent luminance equivalent of the bulb or the actual electrical wattage? For example, a typical LED bulb with a light output rating of 40W and an electrical power of 4W, which value is considered?
It's rated for the actual wattage on the LED bulbs
Date published: 2024-04-15
Can you use two of these switches on the same fan?
You would need to use one fan control and a 3way switch on the other side of the circuit.
Date published: 2020-07-24
why do my lights flicker when you try to dim them?
This dimmer is rated for 150W LED & CFL; 300W Incandescent bulbs so I would first check the type of lights you are controlling with it. It also has a calibration wheel to adjust for low end flicker to try.
Pass & Seymour products
1.800.223-4185 opt 1
Mon - Fri: 8am - 8pm EST
(excluding holidays)
Email Us - tech.support@legrand.us
Date published: 2022-02-14
I have installed LSCLDC163PWCCV4 switches so we can use led lights. For some reason the led lights are flickering like crazy. They are GE basic leds, GE Reveal leds, and Walmart leds, all 5 or 5.5 actual watts. Everything flickers. Can you help?
I would suggest contacting Technical Support so they can assist in troubleshooting the cause for the flickering.
Pass & Seymour products
1.800.223-4185 opt 1
Mon - Fri: 8am - 8pm EST
(excluding holidays)
Email Us - tech.support@legrand.us
Date published: 2020-12-24
Can the motor Load of this switch accept Exhaust fans? I would like one for bathroom lights and the other for the exhaust fan.
Yes, as long as the fan does not exceed 1.6A rating.
Date published: 2020-01-14
My ceiling fan has a 3-way light switch and 3-way fan switch on each end of the room. I want to dim the lights and adjust the fan speed at the wall switches. Can I replace the 3-way light and 3-way fan switch on each end of the room with LSCLDC163P ?
The LSCLDC163P can only be used at one end of your 3way. The other side would have to be 3way switches(like the RCD33, stacked switches).
Date published: 2024-04-15
I installed a fan with a light on patio. I have a 3-way switch, one in the kitchen and one in master bedroom that control the fan. I need a dual fan/light 3-way. Do they exist? Will this work?
The dual controller(LSCLDC163PW) can be used on one side of your 3way and a standard 3way switch(s) on the other end(RCD33W for example).
Date published: 2022-01-23
Can this dimmer switch be used with two 100 watt equivalent led bulbs?
The dimmer is rated for 150W of CFL/LED bulbs, and up to 300W of Incandescent bulbs.
Date published: 2019-10-02
Can you use this switch to operate and dim two LED light fixtures instead of the fan?
The dual controller is designed for one light circuit and one fan circuit only. The fan control will not work correctly on a light load.
Date published: 2021-11-07
My son bought two of these fan light controls for his great room. The wiring diagram shows it like a 4 way switch between 2 3 ways but it is labeled so that the switch legs from the 3 ways both go to the lights but pic shows one to the fan?
Hello,
The LSCLDC163P is a dimmer on the left and fan speed control on the right. You can wire a light fixture single pole or 3 way,the fan can also be configured in a single pole or 3 way configuration. It needs to be on the HOT side to be able to feed both dimmer and fan speed control. You can not have 2 LSCLDC163P in the same circuit.
Hope this helps,
Have a great day
Date published: 2020-11-09
Can I use this to run 2 separate light switches? I'm stuck with a 2 toggle deci switch and cant install another recptacle.
The LSCLDC163PW is designed to be used to control one light load and one motor(fan) load only.
Date published: 2019-01-15
Electrician confirmed this is not compatible with new model Kichler Starkk 330171NI ceiling fan w/ LED light kit. Chat on this site is not operable.
Good Morning,
It is unclear what you are asking us. You gave us no information outside of the fan part number and that your Electrician is an apparent expert on fans. Our chat is always available 8AM-8PM EST.
Hope this helps
Date published: 2019-01-11
Can this control be used to control fan speed and dim lights using only 12-2 wire
Thank you for your question regarding the LS Series Single-Pole/3-WAY Preset Dimmer W/ Single-Pole/3-WAY Preset De-Hummer Fan Control, WHITE(Model # LSCLDC163PW).
You need at least 12-3 wire to control both the light and fan separately. You can power both from one HOT lead, but you need separate LOAD wires for the light and fan to work properly.
Date published: 2018-10-15
Can the fan and light sides be split/wired differently (single pole fan with 3-way light)? I'd like to have a second light switch near an exterior door (with an existing 3-way switch), but a single location to control the fan (at this unit) would be fine.
Thank you for your question regarding Pass & Seymour Dual Fan and Dimmer control(Model # LSCLDC163PW).
Yes, you have both options for the dimmer and fan control. They can be used either was, Single Pole or 3way for each one. You can have both single pole, both 3way, or one SP and the other 3way.
Date published: 2018-08-09
I am looking for a switch like this that can handle two lights with dimming. One with LED and one with Incandescent. The LED dimmer side would work fine but could the FAN side even with only three resets work for incandescent (2-75 watt lights)?
We do not offer any dual dimmers for lighting. This model is designed specifically for a motor load on one side and the other side is for a lighting load.
Date published: 2021-11-07
Is there a video on how to install this switch?
Thank you for your inquiry regarding our LSCLDC163 dimmer and fan speed control device. We do not have a video on the install of this device. If you contact us at 800-223-4185, we would be happy to walk you through the install. If you go to our website and search the product, when you click on the device, you will see specifications and resources on a specific product. Under the resources tab, you will find the install instructions. If that is not enough, contact us and we will take it from there. Hope this helps!
Date published: 2020-08-05
Does this come in the Radaint Nickel finish? Everything else in my home is in that finish.... why wouldn’t one like this be available for my fan/light combos.... I have both bedrooms, kitchen & 2 on lanai.... glaring white as only choice is just UGLY
The LSCLDC163PW is not part of the Radiant line so it is not available in Nickel. The available color options are Black, Brown, Ivory, Light Almond and White.
Date published: 2020-03-27
will this switch work with a fan that doesn’t have pull chain? Fan has an internal receiver and remote.
Bazaarvoice SAP Hybris Integration Version 2.8.1