Turnlok® 30A L14-30 Locking Plug
L1430P
Pass and Seymour
Bazaarvoice SAP Hybris Integration Version 2.8.1
3-Pole, 4-Wire, 30A, 125V/250V, NEMA L14-30P, IP20 suitability, cable compatibility 0.225-in to 1.15-in diameter.
Used to plug/unplug a load consuming a maximum of 30A under a voltage of 250V between the two hot wires and 125V between the hot and the neutral wires to a connection to an electric power supply while protecting the user from direct contact with live parts for 20 years.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Quick-thread assembly screws and cord-grip screws come backed-out, ready-to-wire.
- Industrial-strength, brass alloy plug blades and connector contacts resist heat rise, provide excellent conductivity.
- Raised ribs provide non-slip gripping profile for turning to lock and unlock.
- Double dovetail design provides superior protection against cord pull-out forces.
- Impact- and corrosion-resistant durable nylon 6 shell material.
- Rounded back contour reduces snags and hang-ups on the job site.
- Scallop shell design provides non-slip gripping surface for insertion and withdrawal.
- Visible stamped NEMA configuration and device rating.
- New-design external cord grips provide visible assurance of safe and proper cord retention.
- Integral flexible rubber cord grommet conforms to and seals around SO cord to provide protection from oils, water, or chips entering wiring chamber.
Specifications
General Info
Product Line | Pass & Seymour | ||
Color | Black | ||
UPC Number | 785007143041 | ||
Country Of Origin | Mexico | ||
Application Sector | Industrial | ||
Standard | UL498, FSUL WC596, CSA, NEMA WD-1 and WD-6 |
Dimensions
Product Width US | 2.2 in | ||
Product Depth US | 3.75 in | ||
Product Height US | 2.2 in |
Additional Information
Product Environmental Profile | Yes |
Listing Agencies / 3rd Party Agencies
cULus ListingNumber | 146159 | ||
cULus Listed | Yes |
Technical Information
Number of Wires | 4 | ||
Amperage | 30 A | ||
Number of Poles | Double Pole | ||
Wire Size | 4 | ||
Voltage | 125/250 V |
Resources
Product Environmental Profile
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
What size wire will it accept?
Good Morning,
The plug will accept #18 AWG min - #8 AWG max.
Hope this helps!
Date published: 2020-10-31
My wires going to your plug, is green, red black ,white, this for a generator 240 plug to adapt to a 50 amp receptacle for my RV
The L1430P is a 30A plug.
X = Hot
Y= Hot
G= ground
W= Neutral
Date published: 2024-01-17
30 AMP L1430 Turnlok Locking Plug , how is this wired. I am putting it to a 30 amp stick welder with a three prog plug. I have to make a adapter for it. which wires go to which lug?
The L1430P is rated 30A, 125/250V and would be wired as follows:
Terminals: G - Ground, W - Neutral, X - Hot, and Y - Hot.
Date published: 2022-08-22
Bazaarvoice SAP Hybris Integration Version 2.8.1