0-10V Dual Tech. Wall Switch Occ. Sensor, 120/277V, Lt. Almond
DW-311-LA
Wattstopper
Bazaarvoice SAP Hybris Integration Version 2.8.1
The DW-311 dual technology dimming wall switch sensor can turn lights OFF and ON based on occupancy and allow the user to increase or decrease the lighting level. It combines the benefits of passive infrared (PIR) and ultrasonic occupancy detection technologies and works with 0-10 VDC dimming drivers and ballasts to control lighting loads including LEDs.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Collection consolidated of in 347 V to white option
- Defaults to Manual-ON operation for maximum energy savings
- High sensitivity and dense coverage for exceptional performance
- Color-matched lens and low profile for appealing design
- Supports Partial-ON operation for energy code compliance or incentives
- 120/277VAC and 347VAC models
- Allows fully functional multi-way control from up to four switch locations
Specifications
General Info
| Product Line | Wattstopper | ||
| Color | Light Almond | ||
| UPC Number | 754182939404 | ||
| Country Of Origin | China | ||
| Features | IR (Infrared), Motion Sensor | ||
| Switch Type | Motion Sensor | ||
| Installation Location | Wall | ||
| Application Sector | Commercial |
Dimensions
| Product Width US | 1.8 in | ||
| Product Weight US | 0.3273 lb | ||
| Product Volume US | 35.1 cu in | ||
| Product Depth US | 1.8 in | ||
| Product Height US | 4.1 in |
Additional Information
| RoHS Compliant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. | |
| Security | Yes | This product is ioXt certified | |
| Product Environmental Profile | Yes |
Technical Information
| Response Frequency | 50/60 Hz | ||
| Sensor Type | Occupancy | ||
| Number of Buttons | 3 | ||
| Amperage | 8.3 A | ||
| Sensor Technology | Passive Infrared (PIR), Ultrasonic | ||
| Requires Neutral Wire | No | ||
| Wattage | 1200 W | ||
| Mounting Type | Box | ||
| Voltage | 120/277 V | ||
| Connection Type | Wired |
Resources
Installation Instructions
CAD Drawings
Sell Sheet
Product Environmental Profile
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Does the dw311 require a neutral
Hello John,
DW311 does require a neutral for proper operation and installation.
Best Regards,
Tech Support
Date published: 2024-04-18
Can the DW-311 be used with three switch locations? If so how to wire it.
Yes, when using the DW-311 you can have up to 4 sensors controlling the same light load.
Date published: 2021-09-30
can a DW-311 dimming wall mount sensor be wired with a ceiling sensor to increase coverage area?
Bazaarvoice SAP Hybris Integration Version 2.8.1