Lighting Controls and Systems
Between Discrete Points Allows the Flow of Electrons (Electric Current)
The Electrical Pressure, the force Which Causes Current to Flow Through a Conductor
A Device that Establishes a Connection Between Two or More Units.
Levels of sealing effectiveness of electrical enclosures. IP20, IP55, IP53, IP68
Has External Power Supply
External component that supplies power to an electrical circuit
Maximum electrical current the conductor or device can carry before sustaining immediate or progressive deterioration
Number of Contacts
The Number of Connections Between Two Conductors that permits a Flow of Current or Heat
Value that Specifically Names the Type/the Application Value of the Closest Piece of Equipment/the Designated Type of Construction/the Generic Type/the Manufacturer Type Designation/the Specific Function/the Type of Application
Amount of Time a Timer can Last
The Difference of Electrical Potential Between Two Points of an Electrical or Electronic Circuit Entering a System
The Voltage, Current, and Power Capacities of Relay Contacts Under Specified Environmental Conditions
The Time Span for Which the System/Device is in Desired Active/Working Mode
Product is available to buy on Legrand.us
The Dimension Through an Object as Opposed to its Length or Width
Number of Devices
The amount of devices the product can connect to.
The Minimum Input Which the Device can Sense and Produce the Output
Frequency response is the quantitative measure of the output spectrum of a system or device in response to a stimulus, and is used to characterize the dynamics of the system. It is a measure of magnitude and phase of the output as a function of frequency, in comparison to the input.
Style, Type, Size, Etc. of the Enclosure of a Device
Used to identify and differentiate offerings within a particular product line. Product families are typically treated as adjectives. It is not recommended to use the product line (ex: Wiremold®) and product family names (Evolution™) together. This will introduce a level of unnecessary confusion for the audience.
amount of watts used
The Dimensional Specification of the Object Which is Set as a Target for the Sensor
The total Possible Sensing Capability of the Sensor, Beginning After the Deadband, and Extending Out as Far as the Sensor is Able to Reach Effectively
Number of devices in a wall box or a wall plate
The Rate at Which Energy is Drawn from a Source that Produces a Flow of Electricity in a Circuit
The Temperature at Which the Unit is Safely Operated or Kept without Damaging or Changing the performance Characteristics of the Unit
Product Has Potential to Contribute to LEED
This product contributes to earning credits in the LEED rating system.
Country of Origin
Country that the product was manufactured in.
Material of the product.
The Maximum Amount of Power Which the item can withstand or Operate without any performance Loss
The Number of Occurrences within a Given Time Period, the Rate at Which Alternating Current Makes a Complete Cycle of Reversals
DLM Low Voltage 2-Button Shade Wall SwitchLMSH-SW102X | Wattstopper
LMSH-SW10X Series Wall Switches are low voltage devices for manual control of shades from one or more locations. They are part of a Digital Lighting Management (DLM) system and can control any shade motors connected to DLM shade controllers.Other Options Available
DLM Dual cable connector for LMFC fixture integrated load controllerLMFC-2RJ | Wattstopper
The LMFC-xRJ provides fixture connectivity to the DLM local network via a single- or dual-port RJ45 wiring whip connector.Other Options Available
Outdoor Photcell, 0 - 200 ft CandlesLMPO-200 | WattstopperThe LMIO-301 photocell input module is an accessory for a networked Digital Lighting Management (DLM) installation that allows an LMSM segment manager or LMCP panel to read ambient light levels for use in controlling exterior lighting or interior lighting installed in brightly daylit spaces such as atriums.
DLM Fixture-Integrated 0-10V Load Controller, w/relayLMFC-011 | Wattstopper
The LMFC-011 fixture controller mounts in individual lighting fixtures to give them connectivity to a Digital Lighting Management (DLM) system.
Dual Tech Occupancy Sensor 100-347VAC, Center Mount 360°DT-355 | Wattstopper
Wattstopper’s low profile DT-355 dual technology occupancy sensor combines the benefits of passive infrared (PIR) and ultrasonic technologies.
Line Voltage PIR Fixture Integrated Occupancy Sensor, 12 ft coverageFS-155 | WattstopperThe FS-155/FS-155-1 Line Voltage Passive Infrared (PIR) Sensors control lighting based on occupancy.Other Options Available