text.skipToContent text.skipToNavigation

DLM Single Relay Room Controller, On/Off, 120-277V

LMRC-100 Series Digital Room Controllers include one or two relay(s) for on/off control of a total of 20 amps, and a highefficiency switching power supply. They are the foundation of a Wattstopper Digital Lighting Management (DLM) system, and allow integration of occupancy sensors, daylighting sensors and switches for energy-efficient lighting control.

BAA No

Number of Connectors 1

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

Plenum-rated controllers with line voltage relay(s) and switching power supply
Components of Digital Lighting Management integrated control systems
Plug to other components using Cat 5e cables with RJ45 connectors eliminating wiring errors
Plug n’ Go automatic configuration for maximum energy efficiency
Support energy saving manual-on and bi-level lighting control strategies

Specifications

General Info

Color	White
Product Series	LMRC
Type	Room Controller
Finish	Glossy
Application Sector	Commercial
Product Line	Wattstopper
Country Of Origin	China
Installation Location	Ceiling
Warranty Type	5-Year
Standard	UL 2043, cUL, FCC part 15, PEP, ISO 14025:2010, ISO 14001, RoHS 2011/65/EC
UPC Number	754182926220

Dimensions

Product Depth US	2.0 in
Product Height US	3.9 in
Product Volume US	23.4 cu in
Product Width US	3.0 in
Product Weight US	0.5 lb

Additional Information

RoHS Compliant

Yes

This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.

Technical Information

Current Draw	20 A
Number of Connections	3
Topology	Free Topology
Wire Connection Type	RJ-45
Dimming Compatibility	On/Off
Compatibility	DLM Wired
Has Battery	No
Indoor/Outdoor	Indoor
Input Voltage	120/230/240/277 VAC
Line Frequency	50 Hz, 60 Hz
Load Rating	20 A @ 120/230/240/277 VAC
Mounting Type	1/2 in Knockout, 4 in J-Box
Number of Relays	1
Operating Temperature	0°-40°C, 32°-104°F
Operating Temperature Max	104 °F
Operating Temperature Min	32 °F
Operating Humidity	5-95% RH (Non-Condensing)
Output Voltage	24 VDC
Storage Temperature	23° - 176° F

Resources

What causes the LMRC-101 to beep?

Asked by: Mike

The LMRC-101, like all other DLM devices, is not designed to produce any audible beeps or sounds. If a beeping noise is heard, it is not coming from the LMRC-101 or any other Wattstopper device. The source of the sound is likely an unrelated piece of equipment in the surrounding environment. We recommend checking nearby devices that may have audible alerts or notifications.

Answered by: Tier 1 Tech Support

Date published: 2025-03-27

can this controller be put in a manual mode to over ride the motion sensor?

Asked by: royflex

Hi Roy, The sensor can be overridden directly at the sensor itself. Pressing the "Feature" button until you see "T-Delay" then using the down button to drop the time delay down past 1 minute, you will see "Over". Leave it there and the sensor will be completely overridden until you set it back. If you would like for someone to walk you through the process, please call 1-800-879-8585 Options 1.

Answered by: Tier 1 Tech Support

Date published: 2021-08-10

DLM Single Relay Room Controller, On/Off, 120-277V

Features

Specifications

Resources

Cutsheet

Installation Instructions

CAD Drawings

Brochure

BIM Models

Customer CAD PDF

Case Studies

Reviews

Questions & Answers

What causes the LMRC-101 to beep?

can this controller be put in a manual mode to over ride the motion sensor?