text.skipToContent text.skipToNavigation

Fixture Power Pack w/NO/NC relay w/RJ45 receptacle

The FS-PP Fixture Power Pack provides 24 VDC operating voltage to the FS Low Voltage Sensor series via the RJ45 connector built onto each sensor. The incorporated Form-C Relay, Normally Open (N/O)/Normally Closed (N/C), can control line or low voltage loads.

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

Easy RJ45 connection
Terminals for easy and sure wire connections
Normally Open (N/O)/ Normally Closed (N/C) relay options
LED power indicator
Zero crossing relay

Specifications

General Info

Color	White
Product Series	FS
Type	Power Pack
Material	ABS
Application Sector	Commercial
Product Line	Wattstopper
Country Of Origin	China
Installation Location	Fixture
Warranty Type	5-Year
UPC Number	754182920280

Dimensions

Product Depth US	7.5 in
Product Height US	1.25 in
Product Volume US	14.06 cu in
Product Width US	1.0 in
Product Weight US	0.22 lb

Technical Information

Wire Connection Type	RJ-45
Connection Type	Wired
Indoor/Outdoor	Indoor
Input Voltage	120/277/347 VAC
Line Frequency	60 Hz
Mounting Type	Fixture Embedded
Operating Temperature	32°-131°F
Operating Temperature Max	131 °F
Operating Temperature Min	32 °F
Operating Humidity	5-95% RH (Non-Condensing)
Output Voltage	24 VDC
Wire Gauge	12-18 AWG

Resources

Cutsheet

FS-PP V2 OEM Data Sheet

pdf

Reviews

Questions & Answers

what is the replacement for the FS-PPv2 as it is showing discontinued

Asked by: Anonymous

The direct replacement for the discontinued FS-PPv2 is the BZ-50RC power pack. The BZ-50RC includes an RJ-45 port to support sensors that utilize an RJ-45 connection.

Answered by: Tier 1 Tech Support

Date published: 2025-11-14

Can the FS-PPV2 be powered ON with a 230V/50 Hz? Our assumption is it can be powered ON. Our requirement is power ON this power pack with 230V/50 Hz AC, and use the 24V (out) to power ON the occupancy sensor FS-705.

Asked by: Sathyadev

The Wattstopper FS-PPV2 Fixture Power Pack is designed for input voltages of 120V, 277V, or 347V at 60Hz. Unfortunately, it does not support 230V at 50Hz. Using the FS-PPV2 with a 230V/50Hz power supply could lead to improper operation or damage to the unit. To safely operate the FS-PPV2 in a 230V/50Hz environment, you would need a step-down transformer that converts 230V to one of the supported voltages (120V, 277V, or 347V) at 60Hz. Alternatively, consider using the Wattstopper FSP-211 or FSP-221 sensors, which can operate at 230V/50Hz and might be suitable for your application.

Answered by: Tier 1 Tech Support

Date published: 2025-05-20