text.skipToContent text.skipToNavigation

Green and white RJ45 Cables, plenum rated wires

White and green wires for the Plenum rated coupler splitter for DLM

Green wiring for the Plenum rated coupler splitter for DLM

Green applicator for the Plenum rated coupler splitter for DLM

Wiring for the Plenum rated coupler splitter for DLM

Applicators for the Plenum rated coupler splitter for DLM

RJ45 Cables, 50 feet, plenum rated Green

LMRJ-P50 Wattstopper

LMRJ Series cables connect Digital Lighting Management (DLM) components without the need for tools or point-to-point discrete wiring. Cables are pre-terminated with industry standard RJ45 connectors compatible with any RJ45 port on DLM components. LMRJ cables utilize B to B wiring.

Color Green

Length 50.0 ft

Plenum Y

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

Pre-terminated LMRJ cables for DLM local networks in lengths up to 100 feet
UL and cUL listed and labeled
Wattstopper LM-MSTP wire required for wired segment networks.
This wire is not needed for wireless DLM networks using the wireless bridge (LMBC-600)
Standard green color and markings for DLM provide easy identification of LMRJ cables in plenum
Cables and wire available in a choice of colors for use in exposed locations
LMRJ cables available in plenum and non-plenum rating

Specifications

General Info

Color	Green
Product Series	LMRJ
Type	Cable
Application Sector	Commercial
Product Line	Wattstopper
Country Of Origin	Vietnam
Jacket Color	Green with Black Stripe
Warranty Type	5-Year
Standard	UL, cUL, PEP
UPC Number	754182925186

Dimensions

Product Depth US	0.5 in
Product Height US	0.6 in
Cable Length	50 ft
Product Volume US	180.0 cu in
Product Length US	600.0 in
Product Weight US	1.0 lb

Additional Information

DesignLights Consortium Qualified System	Yes
Security	Yes	This product is ioXt certified
RoHS Compliant	Yes	This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.

Technical Information

Cable Diameter	0.2 in
Cable Type	Booted, Snagless
Category Performance Application	Cat5e
Conductor	4-Pair Twisted
Connector 1	RJ-45 Male
Connector 2	RJ-45 Male
Indoor/Outdoor	Indoor
Insulation Material	FEP (Fluorinated Ethylene Propylene)
Jacket Rating	FT6 Rated
Jacket Application	Plenum Rated
Shielded/Unshielded Cable	Unshielded
Temperature Rating	75° C
Termination Style	Pre-Terminated
Wire Gauge	24 AWG

Resources

Cutsheet

LMRJ Series Pre-Terminated Cables and Segment Network Wire Cutsheet

pdf

Reviews

Questions & Answers

What’s the color configuration on the LMRJ – P 50 cable

Asked by: Bruce

The LMRJ pre-made cables utilize the TIA/EIA-568B wiring standard for all terminated ends. If you are terminating your own Cat5e or Cat6 cables for use with DLM devices, please ensure the following: Standard: Both ends of the cable must follow either the 568B or 568A configuration. Consistency: Avoid "crossover" configurations; the wiring must be identical on both connectors to ensure proper communication between DLM components.

Answered by: Tier 1 Tech Support

Date published: 2026-02-23

Will a standard computer network patch cable work with the room controllers?

Asked by: Danny

Hi Danny, Yes, a standard B-B network cable can be used if tested for proper continuity. Legrand recommends using our factory tested cables, so the project/product warranty is not affected.

Answered by: Tier 1 Tech Support

Date published: 2023-06-29