RJ45 Cables, 35 ft, plenum rated, Green
LMRJ-P35
Wattstopper
Bazaarvoice SAP Hybris Integration Version 2.8.1
LMRJ Series cables connect Digital Lighting Management (DLM) components without the need for tools or point-to-point discrete wiring. Cables are pre-terminated with industry standard RJ45 connectors compatible with any RJ45 port on DLM components. LMRJ cables utilize B to B wiring.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Pre-terminated LMRJ cables for DLM local networks in lengths up to 100 feet
- UL and cUL listed and labeled
- Wattstopper LM-MSTP wire required for wired segment networks.
- This wire is not needed for wireless DLM networks using the wireless bridge (LMBC-600)
- Standard green color and markings for DLM provide easy identification of LMRJ cables in plenum
- Cables and wire available in a choice of colors for use in exposed locations
- LMRJ cables available in plenum and non-plenum rating
Specifications
General Info
| Color | Green | ||
| Product Series | LMRJ | ||
| Type | Cable | ||
| Application Sector | Commercial | ||
| Product Line | Wattstopper | ||
| Country Of Origin | China | ||
| Jacket Color | Green with Black Stripe | ||
| Warranty Type | 5-Year | ||
| Standard | UL, cUL, PEP | ||
| UPC Number | 754182939329 |
Dimensions
| Product Depth US | 0.5 in | ||
| Product Height US | 0.6 in | ||
| Cable Length | 35 ft | ||
| Product Volume US | 126.0 cu in | ||
| Product Length US | 420.0 in | ||
| Product Weight US | 0.7 lb |
Technical Information
| Cable Diameter | 0.2 in | ||
| Cable Type | Booted, Snagless | ||
| Category Performance Application | Cat5e | ||
| Conductor | 4-Pair Twisted | ||
| Connector 1 | RJ-45 Male | ||
| Connector 2 | RJ-45 Male | ||
| Indoor/Outdoor | Indoor | ||
| Insulation Material | FEP (Fluorinated Ethylene Propylene) | ||
| Jacket Rating | FT6 Rated | ||
| Jacket Application | Plenum Rated | ||
| Shielded/Unshielded Cable | Unshielded | ||
| Temperature Rating | 75° C | ||
| Termination Style | Pre-Terminated | ||
| Wire Gauge | 24 AWG |
Resources
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
What’s the color configuration on the LMRJ – P 50 cable
The LMRJ pre-made cables utilize the TIA/EIA-568B wiring standard for all terminated ends.
If you are terminating your own Cat5e or Cat6 cables for use with DLM devices, please ensure the following:
Standard: Both ends of the cable must follow either the 568B or 568A configuration.
Consistency: Avoid "crossover" configurations; the wiring must be identical on both connectors to ensure proper communication between DLM components.
Date published: 2026-02-23
Will a standard computer network patch cable work with the room controllers?
Hi Danny,
Yes, a standard B-B network cable can be used if tested for proper continuity. Legrand recommends using our factory tested cables, so the project/product warranty is not affected.
Date published: 2023-06-29
Bazaarvoice SAP Hybris Integration Version 2.8.1