RJ45 Cables, 75 ft, plenum rated, Green
LMRJ-P75
Wattstopper
Bazaarvoice SAP Hybris Integration Version 2.8.1
LMRJ Series cables connect Digital Lighting Management (DLM) components without the need for tools or point-to-point discrete wiring. Cables are pre-terminated with industry standard RJ45 connectors compatible with any RJ45 port on DLM components. LMRJ cables utilize B to B wiring.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Pre-terminated LMRJ cables for DLM local networks in lengths up to 100 feet
- UL and cUL listed and labeled
- Wattstopper LM-MSTP wire required for wired segment networks.
- This wire is not needed for wireless DLM networks using the wireless bridge (LMBC-600)
- Standard green color and markings for DLM provide easy identification of LMRJ cables in plenum
- Cables and wire available in a choice of colors for use in exposed locations
- LMRJ cables available in plenum and non-plenum rating
Specifications
General Info
| Color | Green | ||
| Product Series | LMRJ | ||
| Type | Cable | ||
| Application Sector | Commercial | ||
| Product Line | Wattstopper | ||
| Country Of Origin | Vietnam | ||
| Jacket Color | Green with Black Stripe | ||
| Warranty Type | 5-Year | ||
| Standard | UL, cUL, PEP | ||
| UPC Number | 754182939350 |
Dimensions
| Product Depth US | 0.5 in | ||
| Product Height US | 0.6 in | ||
| Cable Length | 75 ft | ||
| Product Volume US | 270.0 cu in | ||
| Product Length US | 900.0 in | ||
| Product Weight US | 1.65 lb |
Additional Information
| DesignLights Consortium Qualified System | Yes | ||
| Security | Yes | This product is ioXt certified | |
| RoHS Compliant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. |
Technical Information
| Cable Diameter | 0.2 in | ||
| Cable Type | Booted, Snagless | ||
| Category Performance Application | Cat5e | ||
| Conductor | 4-Pair Twisted | ||
| Connector 1 | RJ-45 Male | ||
| Connector 2 | RJ-45 Male | ||
| Indoor/Outdoor | Indoor | ||
| Insulation Material | FEP (Fluorinated Ethylene Propylene) | ||
| Jacket Rating | FT6 Rated | ||
| Jacket Application | Plenum Rated | ||
| Shielded/Unshielded Cable | Unshielded | ||
| Temperature Rating | 75° C | ||
| Termination Style | Pre-Terminated | ||
| Wire Gauge | 24 AWG |
Resources
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
What’s the color configuration on the LMRJ – P 50 cable
The LMRJ pre-made cables utilize the TIA/EIA-568B wiring standard for all terminated ends.
If you are terminating your own Cat5e or Cat6 cables for use with DLM devices, please ensure the following:
Standard: Both ends of the cable must follow either the 568B or 568A configuration.
Consistency: Avoid "crossover" configurations; the wiring must be identical on both connectors to ensure proper communication between DLM components.
Date published: 2026-02-23
Will a standard computer network patch cable work with the room controllers?
Hi Danny,
Yes, a standard B-B network cable can be used if tested for proper continuity. Legrand recommends using our factory tested cables, so the project/product warranty is not affected.
Date published: 2023-06-29
Bazaarvoice SAP Hybris Integration Version 2.8.1
Recently Viewed
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
BOX140 | Pass and Seymour
Strain Relief Grips
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
LMRJ-P100 | Wattstopper
LMRJ Series cables connect Digital Lighting Management (DLM) components without the need for tools
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
LMRJ-P35-W | Wattstopper
LMRJ Series cables connect Digital Lighting Management (DLM) components without the need for tools