
PIR Wall Switch Occupancy Sensor, Black
PW-301-B
Wattstopper
Bazaarvoice SAP Hybris Integration Version 2.8.1
The PW-301 passive infrared (PIR) wall switch sensor can turn lights OFF and ON based on occupancy. It is characterized by high sensitivity to small and large movements, appealing aesthetics, and a variety of features.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- High sensitivity and dense coverage for exceptional performance
- Defaults to Manual-ON operation for maximum energy savings
- Color-matched lens and low profile for appealing design
- Optional neutral connection with break off tab to expose neutral terminals
- 120/240/277 VAC and 347 VAC models
- Allows multi-way control from one of up to four control locations
Specifications
General Info
Color | Black | ||
Product Series | PW-300 | ||
Type | Sensor, Switch | ||
Application Sector | Commercial | ||
Product Line | Wattstopper | ||
Country Of Origin | China | ||
Features | Adjustable Time Delay, Indicator Lights, Light Level Sensor, Sensitivity Adjustment, Vandal Resistant Lens | ||
Included | Sensor Mask | ||
Installation Location | Wall | ||
Switch Type | Motion Sensor | ||
Warranty Type | 5-Year | ||
Standard | UL, cUL | ||
UPC Number | 754182935215 |
Dimensions
Product Depth US | 1.81 in | ||
Product Height US | 4.1 in | ||
Product Volume US | 35.1 cu in | ||
Product Width US | 1.75 in | ||
Product Weight US | 0.3 lb |
Additional Information
RoHS Compliant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. |
Technical Information
Amperage | 4.3 A | ||
Number of Connections | 5 | ||
Number of Rockers | 0 | ||
On Function | Selectable Auto/Manual | ||
Requires Neutral Wire | No | ||
Wire Connection Type | Flying Leads | ||
Has Battery | No | ||
Input Voltage | 120/240/277 VAC | ||
Line Frequency | 50 Hz, 60 Hz | ||
Load | 1000W | ||
Mounting Type | In-Wall | ||
Number of Buttons | 1 | ||
Sensing Range | Major motion 35 x 30 ft,Minor motion 20 x 15 ft | ||
Sensor Type | Occupancy | ||
Sensor Technology | Passive Infrared (PIR) | ||
Sensor Coverage Pattern | 180 deg | ||
Sensor Mounting Height | 4 ft | ||
Wattage | 1200 W |
Resources
Installation Instructions
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Is there a way to adjust the senstivy of this swiths
Hello Frank,
You can adjust the PIR sensitivity via DIP Switch #8 to the up position to decrease the PIR sensitivity.
Best Regards,
Date published: 2024-01-20
IS THERE ANY WAY TO OVERRIDE THE SENSOR SO THAT THE LIGHT WILL REMAIN ON EVEN IF NO MOTION IS DETECTED?
Hello, This sensor cannot be fully overridden and will always turn off after the given time delay. For assistance in configuring your device, please call in to technical support for assistance.
Date published: 2023-09-14
I have 2 of these set up in a three way application. I have the three way wired correctly but not sure if the dip switches are set right. I can not get the switches to turn the lights on or off. Any help would be greatly appreciated. Thank you
Please contact Wattstopper Technical Support for troubleshooting assistance @ 800-879-8585.
Date published: 2022-02-01
Can a PW301 sensor be used in a cold weather application such as an outdoor storage shed
The sensor has a minimum operating temperature of 32F or 0C.
Date published: 2021-11-03
Bazaarvoice SAP Hybris Integration Version 2.8.1