text.skipToContent text.skipToNavigation
  1. Home
  2. Lighting Controls and Systems
  3. Occupancy and Vacancy Sensors
  4. Wall Switch Occupancy and Vacancy Sensors
PW-301-W Front
PW-301-W Front
PW-301-W Front
PW-301-W Front
Side of PW-301-W
PW-301-W Angled image
Back of PW-301-W

PIR Wall Switch Occupancy Sensor, White

PW-301-W Wattstopper
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 76ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

The PW-301 passive infrared (PIR) wall switch sensor can turn lights OFF and ON based on occupancy. It is characterized by high sensitivity to small and large movements, appealing aesthetics, and a variety of features.
Color White
BAA No
Voltage 120/277 VAC
Where To Buy
  • Send
  • Save as PDF
  • Add to favorites Remove from favorites
Features

Features

  • High sensitivity and dense coverage for exceptional performance
  • Defaults to Manual-ON operation for maximum energy savings
  • Color-matched lens and low profile for appealing design
  • Optional neutral connection with break off tab to expose neutral terminals
  • 120/240/277 VAC and 347 VAC models
  • Allows multi-way control from one of up to four control locations
Specifications

Specifications

General Info
Color White
Product Series PW-300
Type Sensor, Switch
Finish Glossy
Application Sector Commercial
Product Line Wattstopper
Country Of Origin China
Features Adjustable Time Delay, Indicator Lights, Light Level Sensor, Sensitivity Adjustment, Vandal Resistant Lens
Included Sensor Mask
Installation Location Wall
Switch Type Motion Sensor
Warranty Type 5-Year
Standard UL, cUL
UPC Number 754182935260
Dimensions
Product Depth US 1.81 in
Product Height US 4.1 in
Product Volume US 35.1 cu in
Product Width US 1.75 in
Product Weight US 0.3 lb
Additional Information
RoHS Compliant Yes This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.
Technical Information
Number of Rockers 0
On Function Selectable Auto/Manual
Requires Neutral Wire No
Wire Connection Type Flying Leads
Has Battery No
Indicator PIR Detection LED
Indoor/Outdoor Indoor
Input Voltage 120/240/277 VAC
Line Frequency 50 Hz, 60 Hz
Load Rating 1000 W @ 120 VAC, 1200 W @ 240/277 VAC
Mounting Type In-Wall
Number of Buttons 1
Number of Poles Multi-Location, Single Pole
Timer Type DIP Switch
Timer Duration 5-30 Minutes
Operating Temperature 0°-55°C, 32°-131°F
Operating Temperature Max 131 °F
Operating Temperature Min 32 °F
Operating Humidity 5-95% RH (Non-Condensing)
Sensing Range Major motion 35 x 30 ft,Minor motion 20 x 15 ft
Sensor Type Occupancy
Sensor Technology Passive Infrared (PIR)
Sensor Coverage Pattern 180 deg
Sensor Mounting Height 4 ft
Storage Temperature 23° - 176° F, -5° - 80° C
Engraving Type Blank
Resources
Related Products
Reviews

Reviews

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 22ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Questions & Answers

Questions & Answers

Is there a way to adjust the senstivy of this swiths

Asked by: Frank
Hello Frank, You can adjust the PIR sensitivity via DIP Switch #8 to the up position to decrease the PIR sensitivity. Best Regards,
Answered by: Justin
Date published: 2024-01-20

IS THERE ANY WAY TO OVERRIDE THE SENSOR SO THAT THE LIGHT WILL REMAIN ON EVEN IF NO MOTION IS DETECTED?

Asked by: LARRY NEMER
Hello, This sensor cannot be fully overridden and will always turn off after the given time delay. For assistance in configuring your device, please call in to technical support for assistance.
Answered by: Wiremold Tech Support
Date published: 2023-09-14

I have 2 of these set up in a three way application. I have the three way wired correctly but not sure if the dip switches are set right. I can not get the switches to turn the lights on or off. Any help would be greatly appreciated. Thank you

Asked by: EcoGuy
Please contact Wattstopper Technical Support for troubleshooting assistance @ 800-879-8585.
Answered by: Tier 1 Tech Support
Date published: 2022-02-01

Can a PW301 sensor be used in a cold weather application such as an outdoor storage shed

Asked by: Chris
The sensor has a minimum operating temperature of 32F or 0C.
Answered by: Legrand Technical Support
Date published: 2021-11-03
  • y_2025, m_4, d_25, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_12
  • loc_en_US, sid_PW-301-W, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_legrand
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 75ms
  • QUESTIONS, PRODUCT
Back to Top