adorne® 700W sofTap™ Tru-Universal Dimmer, White
ADTP703TUW4 adorne Collection
adorne sofTap Tru-Universal Dimmer is rated out of 5 by 24.
Bazaarvoice SAP Hybris Integration Version 2.8.1
Turn lights on/off, or dim, with just a soft tap of a finger, thanks to inventive micro-movement technology. Plus, as a Tru-Universal Dimmer, it works with virtually any 120V dimmable bulb or fixture, adjusting to the precise light level you want, without the flicker. Coordinating screwless Wall Plate included, for a sleek and contemporary aesthetic.
Added to Your
WHERE TO BUY
|Product Line||Pass & Seymour|
|Country Of Origin||China|
|Number of Switches||1|
|Number of Gangs||1|
|Number of Poles||Single Pole 3-Way|
|Connection Type||Internal Pressure Plates|
10 Tips for Your DIY Designer Switches & Outlets Projectpdf
Cleaning Instructions for Wiring Devicespdf
Meet Your Matchpdf
adorne Collection Dimmer Compatibility Chartpdf
adorne Limited Lifetime Warrantypdf
adorne Product Comparison Chartpdf
adorne Room Planner Checklistpdf
adorne sofTap Tru-Universal Dimmer Bulb Compatibilitypdf View More
Customer CAD PDF
Guide Form Specifications
Rated 2 out of 5 by Mountainman from Love the Look- still needs work on the value Love the look and design of the switches. Don’t like how the dimmer has a dim (no pun intended) locator light vs. the regular switch- which isn’t visually appealing and super irritating considering the price. Looks really bad on a 2+ gang switch when they are right next to each other. Also- my tru universal won’t turn on my LED pendants unless it starts on the highest power vs. the lower end. So much for versatility. Once again as many reviewers expressed- at this price point- we demand perfection and flawless execution as there’s nothing out there more expensive. GET IT RIGHT!
Date published: 2020-02-03
Rated 5 out of 5 by Mvuks from Dim lighting I am so happy with the soft top dimmer switch that I had got last week the dimmer is very easy to use. There was no need for a professional installation as the instructions were very clear it actually worked on the first try, Something I’m not that familiar with After using it I plan on going buying more for my downstairs game room and are outside party room. It’s certainly can set the mood for whatever occasion with a push of a button
Date published: 2018-10-25
Rated 4 out of 5 by lon123 from sofTap™ Dimmer Switch, 700W Tru-Universal, White Received this switch about a week ago, installed switch overall it works great made very well good and solid no cheap materials only down side of it for me was wall plate does not sit flush on wall tried adjusting several times still sits from wall about 1/8'' to 3/16''
Date published: 2018-10-17
Rated 5 out of 5 by Judyh from These switches are awesome! I replaced all the switches and outlets in my house to legrand adorne and I looks fresh and modern! What a difference!
Date published: 2018-04-04
Rated 5 out of 5 by INWmom from Dims beautifully, no flicker Bought “regular” LeGrande paddle dimmers and they dim great and look beautiful, but with some of our LED lights there was a flicker. Switched to the soft tap true universal and they dim to almost off and no flicker at any light level. Love how they dim to off for an elegant effect.
Date published: 2019-03-31
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
I just installed this sofTap dimmer switch and it turns on and off and dims as it should. It does, however, 'click' when I turn the switch on and off. What is causing this, please? Should I be concerned? Thank you.
The "click" is the opening and closing of the internal contacts, which is normal and you should not be concerned.
Date published: 2021-12-14
Installed this with WAC InvisiLED Pro2 24v (LED-TX24) tape light/ WAC 96 Watt Dimmable Power Supply (EN-24100-RBT2-T). Even after setting to low level trim, the lights flash when dimmed. Is there a minimum load for these dimmers? Other suggestions?
The universal dimmer has a 6W minimum load required and for WAC lighting(ELV), the dimmer should be put into Reverse phase.(see User Adjustments section on attached instruction link) https://legrand.webdamdb.com/directdownload.php?ti=55646800&tok=GcNt2dYl9SpC4XAf0iSV9gRR
Date published: 2021-07-09
Im replacing a lutron 3way with a legrand ADTP703TUG4. The wall has 4 wires. (black, white, red and bare). The switch has sockets for hot, neutral, 3 way and pole? what goes where? the diagram doesnt help
Hello, When installing this Legrand dimmer in a 3-way it has to be installed on the load side and the switch needs to be on the line side. We are not able to identify the wires in the wall just what wires need to be connected on the back of this dimmer. Ground wire goes to green, Neutral wire goes to white, Hot goes to black, 3-way and 1 pole need to be matched up between the dimmer and switch. Please contact us at 844-957-3783 if you have any other questions. Thank you,
Date published: 2022-01-21
I'm currently using the adorne® 20A 4-Way Paddle™ Switch ASPD2042G4 pairing with 02 Adorne 3-Way Paddle Switches. Can I replace one of the 3-Way Paddle Switches by 01 adorne® 700W sofTap™ Tru-Universal Dimmer ADTP703TUW4?
Yes, either one 3way switches can be replaced with the dimmer.
Date published: 2021-04-28
I just completed a complete remodel of my Kitchen. I used all Adorne Legrand devices. I am controling my LED undercounter lighting with a soft tap universal dimmer. My Kicher undercounter lighting is buzzing. did not buzz with conv. dimmer
The Softap dimmer may need to be adjusted for the under cabinet lights you are controlling. If they are ELV(electronic low voltage), you need to put the dimmer into reverse phase. These steps are included with the dimmer instructions: SP/3Way true universal dimmer phase settings….FORWARD or REVERSE: You need to be in the minimum trim level adjustments to change the dimmer phase. To enter Min Level Trim: Hold Rocker button down for approximately 10s after minimum brightness reached. Bargraph LEDs will turn on to indicate cal mode activated. Releasing button within 5 seconds activates automated Min Level Trim feature as described in Initial Turn-on section below. Continuing to hold button for approximately 5 more seconds causes the +/- LEDs to flash, and initiates manual calibration. (basically hold for approx 15 secs until the +/- start flashing) Forward or Reverse Phase Selection Forward Phase is the default as shipped from factory. During manual Min Level Trim, holding On/Off button for approximately 10s toggles between Forward and Reverse Phase. The LED flash rate during calibration is approximately 1Hz for Reverse Phase, approximately 3Hz for Forward Phase. FORWARD phase – FAST blink REVERSE phase – SLOW blink
Date published: 2022-01-27
I have an ADTP703TUW4 in my bathroom that had been working great, but it has stopped retaining the LDL (last dim level), so whenever I turn the light on with the On/Off pushbutton it turns on on the lowest dimming setting. How can I fix this?
I would try resetting the breaker to the dimmer to force it to recalibrate it's settings. If that does not correct it, contact Technical Support for further assistance. adorne products 1.800.223.4185 opt 3 Mon - Fri: 8am - 6pm EST (excluding holidays) Email Us - email@example.com
Date published: 2021-01-03
Will this switch ADTP703TUM4 dim this light? https://www.lumens.com/geos-led-flushmount-by-dweled-uu572078.html I've got your paddle dimmer installed and it flickers. Thanks
Yes, the ADTP703TUM4 is rated to handle ELV loads, where the Paddle dimmer is not. This is from the Lumens spec sheet for your light: Dimmable When Used With a Electronic low voltage (ELV) Dimmer (Not Included)
Date published: 2020-10-06
Does this dimmer REALLY work with standard 110 VAC 6W LED bulbs? I have several of your LED dimmers that will only reduce the brightness of the LED bulbs to about 75% of full brightness - not very much.
The universal dimmer is designed to dim to approximately 3% of your light load but also depends on the low end restrictions of the LED bulb. Some only dim to 10%.
Date published: 2020-06-25
Can you use with ceiling fan light?
You should look into AAFN4S16AM4 see https://smhttp-ssl-40934.nexcesscdn.net/pdf/adorne-Install-AAFN4S16A_340966.pdf
Date published: 2020-04-21
Can this be used as a 3-way switch with dimmers on both sides?
Not very well. I have two 3way switches and the work sporadically. Usually have to reset at main switch.
Date published: 2020-04-14
I have a sofTap dimmer with two chandeliers with 38 pieces beach one 6w LED dimeable bulbs. It is getting hot. Why is the reason?
I suggest you contact an electrician to figure that out. I am a homeowner that used the legend products and we love them with no issues.
Date published: 2021-02-02
The light fixture I am installing requires a 1-10v dimmer. Will this dimmer works?
The universal dimmer is not designed to handle 0-10V fixtures. Here are our available options in Magnesium: https://www.legrand.us/search.aspx?q=adpd4fbl3p2m4 https://www.legrand.us/search.aspx?q=adtp4fbl3pm4 https://www.legrand.us/search.aspx?q=adth4fbl3pm4
Date published: 2020-02-19
Will this dimmer work with the following Commercial Electric LEDs? https://www.homedepot.com/p/Commercial-Electric-Ultra-Slim-6-in-New-Construction-and-Remodel-Color-Selectable-Canless-LED-Recessed-Kit-4-Pack-91365/306079856
Yes, the universal adorne dimmer is designed to work with this type of LED recessed fixture.
Date published: 2020-02-05
Hi - I'm using this dimmer (ADTP703TUW4) with a regular 3-way softap switch (no dimmer). Can these be used in either the master or remote locations? I can get mine to work at first but then the softtap switch stops working after 4-5 pushes.
When using True Universal Dimmer in a 3 way application, with an electronic switch (Soft Tap, Touch, or Wave), the HOT wire MUST be connected to the electronic switch, and the dimmer MUST be connected to the load. Reversing this wiring (HOT to Dimmer and LOAD to Switch ) will cause the switch to stop functioning. The switch requires 120 VAC to operate. When the voltage to the switch is lowered by using the dimmer, the electronics in the switch stop functioning. This only applies when using an electronic switch. A standard switch (Paddle, Push and Whisper, for example) is not effected.
Date published: 2020-01-02
I have a 560 watt LED load, will this dimmer work with this load? I know a lot of dimmers I have looked at have a lower led threshold than incandescent and didn't know if the 700watt rating was across the board or incandescent only.
The maximum wattage rating depends on what type of lights(LED's) you are controlling. Max. load rating: • Incandescent: 700W • MLV: 500VA • ELV: 700W • EFL: 5.5A • CFL and LED: 450W(screw in bulbs)
Date published: 2019-11-01
We have the dimmer Legrand ADTP703TUM4. Can we use wall plate Legrand AWM1G2MS4 for this dimmer ?
Yes, AWM1G2MS4 is correct.
Date published: 2019-10-01
My electrician just installed 7 of these in our home and they are all extremely hot to the touch (180+). 4 of them are running six 10w cans, the rest are lower loads (one just a single 10w can). Reverse phase setting helped slightly. Anything else to try?
I would suggest contacting adorne Technical Support to go over the installation and possible adjustments that can be made to the universal dimmers. adorne products 1.800.223.4185 opt 3 Mon - Fri: 8am - 8pm EST (excluding holidays) Email Us - firstname.lastname@example.org
Date published: 2019-07-30
I have a soft tap dimmer set up in a 3 way with a whisper switch at another location in a 3 way. The lights do not come on at all. I've installed according to the manual, do I need another dimmer switch on the other end for this to work?
The Softap dimmer is designed to be used with any 3way switch(not dimmer) for a 3way application. I would suggest contacting adorne Technical Support to try and troubleshoot your installation issue. adorne products 1.800.223.4185 opt 3 Mon - Fri: 8am - 8pm EST (excluding holidays) Email Us - email@example.com
Date published: 2019-07-30
Can the dimmer be paired with a wave switch for a three-way set up? Thank you.
The Softap SP/3W dimmer can be used with any 3way switch but seeing the Wave switch is electronic, the following applies: When using True Universal Dimmer in a 3 way application, with an electronic switch (Soft Tap, Touch, or Wave), the HOT wire MUST be connected to the electronic switch, and the dimmer MUST be connected to the load. Reversing this wiring (HOT to Dimmer and LOAD to Switch ) will cause the switch to stop functioning. The switch requires 120 VAC to operate. When the voltage to the switch is lowered by using the dimmer, the electronics in the switch stop functioning. This only applies when using an electronic switch. A standard switch (Paddle, Push and Whisper, for example) is not effected.
Date published: 2019-06-17
Are the Adorne dimmers compatible with this LED Downlight?? file:///C:/Users/JHarrington/Downloads/RDL_4RND_9_CTS-97_Downlighting%20Dimmer%20Compatibility.pdf
We have not tested our Softap universal dimmer with RDL-Topaz recessed downlights but with the dimmer's available adjustments(forward/reverse phase and high/low end trim) it should control them without issue. This is from RDL/4RND/9/CTS-97 spec sheet: Dimmable with leading-edge incandescent or LED style dimmers.
Date published: 2019-03-27
I purchased serveral ADTP703TUM4 to operate my living room receseed lights, I currently have 15 Watt LED retrofit recessed lights, the new switch turns the lights on but they do not dim or even turn off? what are the specification of lights I need?
The ADTP703TUM4 dimmer requires a separate Neutral wire so the dimmer can set itself to the load it's controlling and you need to verify that your LED's are "dimmable". The dimmer has a 6 watt minimum load requirement.
Date published: 2019-08-31
can you use this dimmer with an led light with 0-10v dimmer wires
This dimmer would not work for 0-10 volt. Instead you could use adtp4fbl3p. This model is only for 0-10 volt.
Date published: 2019-02-22
I have all touch magnesium switches. I need 3 dimmers. I can't find a 3 way touch dimmer in magnesium that I need. The soft touch does not have the glass face like the touch correct?
correct. we have no problem with 3-way soft touch dimmers. have also used soft touch dimmer wifi for area where there are 3 controls for hall lighting. programming can be a challenge but once done, it's great.
Date published: 2019-01-23
Can the sofTap switches and dimmers be paired with Paddle switches and dimmers in 3-way configurations? (Obviously not double-dimmer circuits, but these three possibilities: Paddle + sofTap, Paddle Dimmer + sofTap, Paddle + sofTap Dimmer.)
Yes You can use these Devices together. The Paddle products will work with our Non-wifi ready Softap products. Paddle + sofTap, (ASTP1532) Paddle Dimmer + sofTap,(ASTP1532) Paddle + sofTap Dimmer (ADTP703TU)
Date published: 2018-10-25
I purchased & installed the SOFTAP™ DIMMER SWITCH, 700W TRU-UNIVERSAL. I am using a BULBRITE ~ LED Filament, 7W, 800 Lumens, 2700K, Medium Base, Fully Dimmable bulb. The light will NOT dim. Have I purchased the wrong dimmer or the wrong bulb?
The dimmer that You are using is Our True universal dimmer. It is designed to dim a wide variety of bulbs. I would recommend calling into our tech support team at 1800 223 4185 and We can help troubleshoot these issues
Date published: 2019-10-07
I purchased this dimmer to replace a switch that controls 9 existing recessed lights that use 11W BR40 LED replacement bulbs. We cannot get the switch to work the dimmer indicator lights just flash. Do I have the wrong dimmer?
I had better luck with the paddle dimmer for CFL/LED, https://www.legrand.us/adorne/products/dimmers/adpd453lw2.aspx. The Softap, which I used initially for LEDs and LED replacements that are linked did not work well.
Date published: 2018-07-30
Can one dim in three way situation from both sides
Thank you for your question reagrding the adorne Softap dimmer(Model # ADTP703TUM4). With this dimmer in a 3way, you can only dim from one location and you would have to have a standard 3way switch on the other end of the circuit. To dim from both locations, you could use the Softap Master dimmer(ADTP700RMTUM1) in one location and the remote dimmer(ADTPRRM1) in the other.
Date published: 2018-07-13
Can I control a 3 speed ceiling fan (or 4 speed if you consider “off” a speed) with this switch?
No You cannot control a fan with this dimmer. This dimmer is made strictly for lighting loads. If You want to control the speed of the fan You would need to use our Paddle Fan speed control Model: AAFN4S16A https://www.legrand.us/search.aspx?q=aafn4s16a
Date published: 2018-06-26
Will this switch work with Just a hot and Neutral??
Thank you for your inquiry regarding our Tru Universal Dimmer. This device requires a hot, neutral, and load wire to the light. If you only have two wires in the box, you probably have a hot and a load wire to the light, with no neutral. The device needs the neutral to calibrate itself to the lighting load. Without a neutral, the device will not function properly. Hope this helps!
Date published: 2019-08-16
What dimmers switches do I use to control 2 sconces on the sides of bathroom mirror. One switch will be in the bathroom and one switch will be in the bedroom? Thanks
Thank you for your inquiry regarding our adorne sofTap tru universal dimmer. If you are looking to use one dimmer and one switch, you can use this dimmer with say an ASTP1532W4. If you are looking to dim from both locations, you must go with the wifi ready devices, which would be an ADTP700RMTUW1 and a ADTPRRW1. If you have follow up questions, feel free to contact us at 800-223-4185 or via email at firstname.lastname@example.org. Hope this helps!
Date published: 2018-12-18
You may also like...
AAAL1G4 | adorne Collection
The Accent Nightlight is a stunning addition to any adorne product. It provides a wash of light below the wall plate, acting as a nightlight or as an accent light.
ASTP1532W4 | adorne Collection
The sofTap switch is designed with an innovative micro-movement that turns lights on and off with just a soft ""tap"" of the finger.
AWP1G2PW4 | adorne Collection
A crisp profile and clean palette make this wall plate fit for any d�cor or design style.
ADTP600RMHW1 | adorne Collection
The sofTap Wi-Fi Ready Master Dimmer is designed with an innovative micro-movement functionality, allowing you to turn lights on and off or dim them with a soft ""tap"" of the finger.