Shallow Switch and Outlet Box
P108W
Pass and Seymour
Bazaarvoice SAP Hybris Integration Version 2.8.1
Single-Gang, Shallow Switch and Outlet Box. Old work flange box for retrofit applications. 20 pack.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Specifications
General Info
| Color | Gray | ||
| Type | Switch & Outlet Boxes | ||
| Material | Thermoplastic | ||
| Application Sector | Commercial, Residential | ||
| Product Line | Pass & Seymour | ||
| Country Of Origin | United States | ||
| Features | Flange, Old Work, Shallow | ||
| Installation Location | Wall | ||
| Warranty Type | 1-Year Limited Warranty | ||
| Standard | UL listed | ||
| UPC Number | 785007179156 |
Dimensions
| Product Depth US | 1.125 in | ||
| Product Height US | 3.75 in | ||
| Product Volume US | 8.0 cu in | ||
| Product Length US | 3.75 in | ||
| Product Width US | 2.313 in | ||
| Product Weight US | 0.11 lb | ||
| Cubic Capacity | 8 in³ |
Additional Information
| RoHS Compliant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. |
Technical Information
| Box Shape | Rectangular | ||
| Cable Entry | Back, Bottom, Top | ||
| Indoor/Outdoor | Indoor | ||
| Mounting Type | Stud Mount | ||
| Number of Gangs | 1 |
Resources
Brochure
Specifications
Supporting Document
Cutsheet
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Is there a version of this box that includes the drywall tabs. - As a cut in box
Thank you for your inquiry. Unfortunately, we do not offer a P108W with swing brackets.
Date published: 2025-01-27
Why do you not list dimensions on spec sheet for boxes instead of making us scour questions and answers for information?!
Thank you for your inquiry. Please review the following dimension information for part number P108W.
Dimensions:
L - 3 3/4
W - 2 5/16
D - 1 1/8
If you have any other questions or comments, please get in touch with us at (800) 223-4185 8:00 a.m. – 6:00 p.m. EST or by email at Tech.Support@legrand.us.
Date published: 2024-10-03
Does this box accept branch circuit wiring in the form of MC cable?
The P108W is not rated for use with MC type cable.
Date published: 2022-08-29
What are the overall dimensions for the P108W box? I need height and width.
Here are the dimensions for P108W:
Height: 3 3/4"
Width: 2 5/16"
Depth: 1 1/8"
Date published: 2024-10-02
Can I use the P108W box to install a receptacle in a 1-1/2" stud wall?
Thank you for your inquiry regarding our P108W. This box has a depth of 1.125" so it could be used in such an application. But please be sure to verify with your local code authority.
Date published: 2024-03-28
Hi- Will any of your GFI outlets fit into this P108W shallow box?
Thank you for your question regarding Pass & Seymour SHALLOW SWITCH AND OUTLET BOX(Model # P108W).
Our non-tamper resistant GFCI's have a depth of 1.03" and we're not aware of any specific rule that quantifies minimum depth.
The old standby is that per NEC 110.12 – “Electrical equipment shall be installed in a neat and workmanlike manner”. So if the box is too shallow or too small, there are multiple wires and wire nuts, multiple wire entries / fittings, and the device is crushing wire insulation, or is bulging out of the wall, the AHJ can reject the installation strictly on “workmanship”.
Date published: 2024-10-02
hi, does duplex receptacles back&side wire (cat. no. TR5252) fit for this outbox?
Thank you for your inquiry regarding our P108W. This box has a depth of 1.125". Our TR5252 has a depth of .93". Therefore, the device will fit in the box. If there are a couple wire nuts behind the receptacle, it may be a tight squeeze. There will not be a ton of room to work with but the devices will certainly work together. Hope this helps!
Date published: 2024-10-02
Bazaarvoice SAP Hybris Integration Version 2.8.1