Switch and Outlet Box
S122R
Pass and Seymour
Single-Gang Deep Switch and Outlet Box, 100-Pack is rated
out of
5 by
1.
Bazaarvoice SAP Hybris Integration Version 2.8.1
Single-gang, deep switch and outlet box. Durable, impact-resistant thermoplastic boxes contain innovative extras that cut installation time. Extra deep for dimmers, GFCIs and thermostats, yet suitable for 2x4 construction. Provides two quick click entries. Qty 100.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Specifications
General Info
Product Line | Pass & Seymour | ||
Color | Gray | ||
Country Of Origin | United States | ||
Construction | Thermoplastic | ||
Standard | UL Listed |
Dimensions
Cubic Capacity | 22 cu in |
Additional Information
RoHS Conformant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. | |
Product Environmental Profile | Yes |
Technical Information
Cable Entry | No | ||
Number of Outlets | 1 |
Resources
Cutsheet
Installation Instructions
Brochure
Product Environmental Profile
Reviews
Rated 2 out of
5
by
Connor from
Poor quality
Cover/device screws either slide right in or strip out before ever getting tight
Date published: 2022-10-03
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
can these be installed in a 2 hour firewall within 2' of an oppsing outlet
For use in fire resistance floor-ceiling assemblies constructed with wood joists, wood flooring and
gypsum wallboard ceilings with 2 hr or less classification periods. Clearance between boxes and cutouts in ceiling shall not exceed 1/8 in. The area of openings for boxes shall not aggregate more than 31 sq in. per 100 sq ft of ceiling area with no opening exceeding 8 sq in.
No box shall be located within 4.5 ft of another box.
Date published: 2020-11-21
Does the Legrand Slater electrical bracket box meet residential building code if fiberglass insulation is used in the walls where the box is located?
UL Classified - All Slater Plastic Boxes are Underwriters Laboratories Listed. Slater Plastic
Boxes shown that are UL Classified for Fire Resistance meet the requirements
of UL263 and have a two hour fire resistance rating. These boxes may be used
in fire resistant walls and ceilings. Installation information for Slater Plastic
Boxes Classified for Fire Resistance may be found in the UL Fire Resistance
Directory under category CEYY for Legrand(see attached).
Date published: 2022-03-09
Can I have 2 12/2 in a nail on plastic box knockout whole?
The "Quick Entry" are rated to accept multiple cables as long as you do not exceed the 22.5 CU IN VOL rating.
Date published: 2020-02-19
Can this box be used in brick
Yes the S122R can be used in a masonry walls
Date published: 2018-10-16
Is there a 1 hour fire rating on this box?
Thank you for your inquiry regarding our plastic wall box S122R. This product has a 2 hr fire rating. Hope this helps!
Date published: 2020-06-26
Bazaarvoice SAP Hybris Integration Version 2.8.1