Shading Solutions for Commercial Spaces

The Legrand Shading Systems Spec Series fascia roll roller shade bracket system has options for motor operated shades, manually operated shades, and convertible manual to motorized (MTM) operated shades.

The Designer Series open roll roller shade bracket system has options for motorized, manual, and convertible manual to motorized (MTM) operated shades.

Legrand offers a variety of commercial skylight shades to fit commercial buildings.

Commercial Light shelves offer complete daylighting control by redirecting sunlight.

Designer Series Shade Systems are a flexible solution for oversized, dual and coupled automated shades.

The Manual to Motorized Roller Shades offers a unique premium manual shade experience that is field upgradable to motorized without complications of needing to change fabric or major bracket reinstallation.

Safe by design, Qfree shades are free of external cords and wires. Featuring smooth operation, these shades are an excellent solution where child safety is a concern.

Qadvanced Intelligent System (QIS) shades come standard with Zigbee HA1.2 and use Cat5e or Cat6 for both power and communication. QIS shades are compatible with wired and wireless control options.

The LMSH-PS602 and LMSH-PS610 are DLM-based shade room controllers, which provide low voltage power and control for up to two or ten motorized shades

Shade Bus connectors provides installers the option to create their own custom length cables using bulk wire with a crimper and connectors. 

LMSH-SB series cables have four wires and are designed to connect DLM shades and power supplies together. There are a variety of lengths and accessories that make cable selection and system layout easy and intuitive. The DLM shade control system can be wired together without tools using the wiring and accessories in the LMSH-SB series.

Crimping Tool provides installers the option to create their own custom length cables using bulk wire with the crimper and connectors. 

Bulk wiring provides installers the option to create their own custom length cables using bulk wire with a crimper and connectors. 

The LMSH-SBTEST allows the installer to test the shade bus for correct connection during installation.

LMSH-SW10X Series Wall Switches are low voltage devices for manual control of shades from one or more locations. They are part of a Digital Lighting Management (DLM) system and can control any shade motors connected to DLM shade controllers.

The SBCA-S2 is a Y splitter cable designed to make wiring of dual shade configurations easier using one port on the SBE4 extender. 

The  LMSH-SBE4 is a shade bus extender that has four parallel female connections that allow the SB cables to extend the shade bus without regard to topology.

The DLM Shade Motors feature a wired connection and wireless built-in BLE.

The LMSH-CR Wireless Configuration Tool is a handheld tool for advanced remote configuration of Wattstopper Digital Lighting Management (DLM) Shade Systems.