text.skipToContent text.skipToNavigation

radiant® 4-Button Digital Timer

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 1501ms
  • REVIEWS, PRODUCT
  • bvseo-msg: Execution timed out, exceeded 1,500ms;

$33.98 USD

Never worry about leaving the lights or fan on, while also reducing energy costs, with the radiant® 4-Button Digital timer. Great to use with attic fans, bathroom and closet lights, heat lamps, and in spaces like basements or garages. Manually turn the light on or off at the paddle switch, or use the included buttons for preset auto-off times of 60, 40, 20 and 10 minute delays. With the convenience of automated control, timers are a great upgrade for garages, laundry rooms and more. Part of the radiant Collection, it features clean lines and smooth paddle action for a sophisticated touch. Made exclusively for use with screwless Wall Plates from the radiant® Collection, sold separately.
Color Nickel

Quantity

In Stock

Free Shipping on Orders Over $49 and Free Returns

WHERE TO BUY

Features

  • Works with a variety of light bulbs or fixtures, including: Incandescent, LED, fluorescent, compact fluorescent (CFL), magnetic low-voltage (MLV) and electronic low-voltage (ELV), 1/6 hp.
  • Automates control of lights for energy and cost savings. Also includes manual on/off through the paddle switch for added convenience.
  • Lets you select a desired preset shut-off time, including 60, 40, 20 and 10 minutes.
  • Installs easily in place of a standard light or fan switch, or older spring-wound timer.
  • Locator light illuminates when switch is off, emitting a soft glow to help you find it in the dark.
  • More color options available to fit any style.
  • Complete the look with a sleek, screwless radiant® Wall Plate, and coordinate with other designer switches and outlets available from the radiant® Collection.

Specifications

General Info
Color Nickel
UPC Number 785007158380
Country Of Origin China
Product Line Pass & Seymour
Number of Switches 1
Application Sector Residential/Commercial
Warranty Type 5-Year
Standard cULus
Dimensions
Product Width US 1.69 in
Product Height US 3.28 in
Product Depth US 1.88 in
Technical Information
Wattage 600 W
Number of Poles Single Pole
Number of Gangs 1
Voltage 120 V
Mounting Type Box
Connection Back & Side Wired
Contact Rating 600Watts
Coil Voltage 120VAC @ 60Hz
Timing Range 10-60 minutes
Action Single Pole

Related Products

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 1500ms
  • REVIEWS, PRODUCT
  • bvseo-msg: Execution timed out, exceeded 1,500ms;

I have a dbl wall box with timer and also SPST light switch.The old timer had red, white wires-RT2 also has black wire. Curr wiring fm wall-black to lightsw trml1, white to trml2 and over to timer "line" trml. Red to timer "load" trml. How to connect RT2?

Asked by: Fred
The correct wiring for the RT2 timer is: • Connect the green or non-insulated (copper) GROUND wire from the circuit to the GROUND terminal on the RT2. • Connect the power wire from the circuit (HOT) to the black wire on the RT2. • Connect the power wire to the lamp or fan (LOAD) to the red wire on the RT2. • Connect the NEUTRAL wires from the circuit to the white wire on the RT2. Radiant products 1.800.223-4162 opt 3 Mon - Fri: 8am - 8pm EST (excluding holidays) Email Us - tech.support@legrand.us
Answered by: Legrand Technical Support
Date published: 2019-12-03

will this timer function on a 24volt dc control circuit .......If not do you have one in the decor square style in brown?????/

Asked by: chris
All of the timers we currently have available are rated for 120VAC only.
Answered by: Legrand Technical Support
Date published: 2019-10-07

I have one fan, controlled by 3 switches with neutral. Will this work in 2 locations. Third location is on/off switch.

Asked by: jeff
The RT2BK Radiant timer is designed for single pole applications only.
Answered by: Legrand Technical Support
Date published: 2019-08-23

Bathroom fan says it won’t work with dimmers or switches with solid state timers, only manual countdown timers. Will this timer work? I can’t find any information on what kind of timer it is. 

Asked by: Eileen
Good Morning, It should work just fine. Typically, solid state only refers to fan speed controls and not standard on/off timer switches. Hope this helps!
Answered by: Tech Support
Date published: 2019-08-06

Does this switch have a minimum load requirement? 

Asked by: Creteinc
The RT2 timer is rated for 0-600W Load, so the minimum load is zero.
Answered by: Legrand Technical Support
Date published: 2020-02-25

Can this be used on a 20 amp circuit?

Asked by: Thomas
Yes The RT2 can be used on a 20A 120V circuit
Answered by: Legrand Technical Support
Date published: 2019-05-03

Can I use this switch if I only have 3 wires,  a hot, a neutral and a ground - no load wire to my fan/light?  If not do you have a timer switch that can be used?

Asked by: John
No, it won't work for you. Switches can be wired two separate ways: power to the switch or power to the light. You need the former for this to work. Responding to Legrand: gee, sure would be nice for there to be a warning on the box explaining this limitation! Even if not on the box, you could put it in the instructions too...
Answered by: calvin
Date published: 2019-05-03

Can this be used to control the 1400 watt HEATING ELEMENT of the Panasonic WhisperWarm ceiling fan & heater. (No problem with the 1/6 hp blower. It's the heating element that I'm asking about.)

Asked by: kcenter
Hello, The RT2W has a maximum load wattage of 600W. Hope this helps, Have a great day.
Answered by: Legrand Techincal Support
Date published: 2019-05-03

When is Graphite color going to be available?

Asked by: Timo76
The RT2 Timer is not available in Graphite at this time. I am unaware if there are plans for this color for this product in the future. At this time it is available in White, Light Almond, Ivory, Black, Nickel, and Dark Bronze
Answered by: Legrand Technical Support
Date published: 2019-05-03

Does the timer start automatically when the paddle switch is used or must someone actively remember to use the timer mode?

Asked by: apinstein
Good Afternoon, The timer starts automatically when the switch is turned on. You don't have to hit it every time unless you want to change the time duration. Hope this helps!
Answered by: Tech Support
Date published: 2019-07-07

where was this purchased ? I'm looking for nickel finish but appears that its discontinued. any info would be greatly appreciated.

Asked by: craig
Thank you for your question regarding Legrand Radiant Nickel 4 button timer(Model # RT2NICCV4). The timer is not being discontinued and can be purchased through any of our retailers or distributors. You may also find them available on-line(Amazon, etc...) https://www.legrand.us/where-to-buy.aspx
Answered by: Legrand Technical Support
Date published: 2019-05-03

Can I use this timer to controller a bathroom heater?

Asked by: Redblur90
Thank you for your question regarding Legrand Radiant timer(Model # RT2W). The RT2W timer has a 1/6 HP rating to control any motor load that does not exceed that rating.
Answered by: Legrand Technical Support
Date published: 2019-05-03

Can I also turn on the connected device and have it STAY on until I turn it off manually?  (as well as the 10/20/40/60 minute count down then turn off feature) 

Asked by: JD1234
Thank you for your inquiry regarding our radiant RT2 countdown timer. This product does not have an override feature and will always turn off after 10/20/40/60 minutes. If you turn the device on and do not select a time, it goes by the last time set. Hope this helps!
Answered by: Legrand Technical Support
Date published: 2019-06-23

will this work with LED Bulbs?

Asked by: JackieS
Thank you for your inquiry regarding our Radiant timer switch. This device will work with LED bulbs as it is only a timer (manual on/timed off) switch. There is no dimming so it will certainly work with LED's. Hope this helps!
Answered by: Legrand Technical Support
Date published: 2019-06-23

Does this support LED bulbs?

Asked by: JackieS
Thank you for your inquiry regarding our Radiant timer switch. This device will work with LED bulbs as it is only a timer (manual on/timed off) switch. There is no dimming so it will certainly work with LED's. Hope this helps!
Answered by: Legrand Technical Support
Date published: 2019-05-03
  • y_2021, m_7, d_23, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.18
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_23
  • loc_en_US, sid_RT2NICCV4, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_legrand
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 78ms
  • QUESTIONS, PRODUCT