Wireless Commissioning Tool for Fixture Mount Sensors
FSIR-100
Wattstopper
Bazaarvoice SAP Hybris Integration Version 2.8.1
The FSIR-100 Wireless IR Configuration Tool is a handheld tool for remote configuration of IR-enabled fixture integrated sensors. The tool enables device modifications via pushbutton, without ladders or tools, and stores up to six sensor parameter profiles to speed configuration of multiple sensors.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Enables fast ladder-free setup and maintenance
- Easy-to-read OLED screen
- Allows precise configuration with greater granularity than dip switches or trimpots
- 2-way IR communication for data upload, download, confirmation and storage
- Easy-to-use navigation pad
- Configures IR-enabled fixture sensors including selected HBP and FSP models
Specifications
General Info
| Color | Black | ||
| Product Series | FSIR | ||
| Type | Configuration Tool | ||
| Application Sector | Commercial | ||
| Product Line | Wattstopper | ||
| Country Of Origin | China | ||
| Included | Batteries, Carrying Case | ||
| Warranty Type | 5-Year | ||
| Standard | RoHS | ||
| UPC Number | 754182931224 |
Dimensions
| Product Depth US | 0.8 in | ||
| Product Height US | 4.2 in | ||
| Product Volume US | 8.4 cu in | ||
| Product Width US | 2.5 in | ||
| Product Weight US | 0.2 lb |
Additional Information
| RoHS Compliant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. |
Technical Information
| Battery | 3 AAA Batteries | ||
| Compatibility | FSP, HBP | ||
| Indoor/Outdoor | Indoor | ||
| Engraving Type | Icon | ||
| Wireless Range | IR, up to 32 ft |
Resources
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Was wondering if the fsir100 can program fsp 311?
The FSIR remote is designed for use with the FSP-2xx series sensors. The FSP-3xx series, including the FSP-311, is programmed using the "Sensor Configuration" mobile app, available for both iOS and Android devices. The FSIR is not compatible with the FSP-3xx series.
Date published: 2025-07-29
How can I delete unused profiles from the tool?
The FSIR-100 remote does not currently offer a way to delete existing profiles. However, you can overwrite any unused or outdated profiles with new settings.
How to Overwrite an Existing Profile on the FSIR-100:
🔹 Power on the FSIR-100 and select the appropriate sensor.
🔹 Select "New Settings."
🔹 Make the necessary setting changes.
🔹 Select "Next."
🔹 Select "Save."
🔹 Choose the profile you wish to overwrite.
This will replace the existing profile with the new settings.
Date published: 2025-05-13
FSP 211 Fixture Dims but will not Cutoff after dimming period. Sensor programmed to - HIGH MODE = 10V LOW MODE= 1V TIME DELAY = 5mins CUTOFF = 5mins SENSITIVITY =MAX
We recommend setting your "Cutoff" value above your "Time Delay" value. They cannot occur at the same time.
Example:
Time Delay = 5mins
Cutoff = 10mins
Date published: 2025-03-31
The FSIR-100 shows version 4.36 and HW=10 on startup screen. Is this the current firmware? If not, how do you update the firmware?
As of February 17, 2025, the current version of the FSIR-100 remote is v4.40. The FSIR-100 is not designed for field upgrades, so if you require a unit with the latest firmware, a new remote with the updated version would need to be acquired.
Date published: 2025-02-17
Hi. What settings do I have to input to keep lights off at night and on during the day?
If you have a LMZC Zone Controller or LMCP Panel you would enter the schedule under panel programming. If you do not have one of those devices a schedule cannot be entered without additional devices.
Date published: 2024-12-10
The lights go on/off throughout the night. from full bright to off. No motion activating them. Light on the sensor is flashing 3 times The setting: High Mode 10 Low mode 4 Time out 30 min Cut off DIS Sensitivity MAX, Setpoint 10, Ramp up 1 down 4s PC 25
Greetings Shane,
I would also disable the set-point this may be the setting causing it to go on and off throughout the night.
High mode: 10v
low mode: 4v
time delay: 30min
cut off: disable
sensitivity: max
setpoint: disabled
ramp up/down: disabled
photocell: 30fc
If any questions, give us a call at 1-800-879-8585 opt. 3 for Technical support
Date published: 2024-11-04
Hello! How do I program to disable the motion sensor but still allow the light fixture to turn on at night via the photocell?
Please try the following settings for on/off photocell only :
High Mode: 10
Low Mode: 9.8
Time Delay: 30m
Cut Off: DIS
Sensitivity: L
Setpoint: DIS
Fade Up: DIS
Fade Down: DIS
Photocell on/off: 30
If you have any questions, please contact Wattstopper Technical Support@ 800-87-8585
Date published: 2024-10-04
Also, in order to dim the lights, do I need a dimmer switch installed to the wall?
Hi,
You can set the fixtured to a fixed dim level by setting the high level to 5(50%) and the low level to 4.8%(48%) Please refer to the user guide available on the product page or reach out to tech support for more assistance.
Legrand Technical Support:
Phone: 1 800-879-8585, Option 3 then Option 1
Mon - Fri: 7am - 7pm CST (excluding holidays)
Date published: 2024-07-18
Bazaarvoice SAP Hybris Integration Version 2.8.1