text.skipToContent text.skipToNavigation

adorne® Motion Sensor Switch, Manual On/Auto Off, Magnesium, with Microban®

adorne Motion Sensor Switch Manual On Auto Off with Microban is rated 2.3 out of 5 by 4.
  • y_2023, m_11, d_27, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.37
  • cp_1, bvpage1
  • co_hasreviews, tv_2, tr_2
  • loc_en_US, sid_ASVS12M4, prod, sort_[SortEntry(order=HELPFULNESS, direction=DESCENDING), SortEntry(order=POSITIVE_FEEDBACK, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_legrand
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 4ms
  • REVIEWS, PRODUCT

$58.01 USD

From bedrooms to basements, this motion sensor switch is perfect for anywhere you might want to worry (or waste electricity) less. A conveniently modern light switch, it features combination control that allows you to manually turn lights on when entering a room, and then automatically turns the lights off for you when you leave. Use this device on its own to control a light or fixture from a single location one location, or combine with additional switches for controlling a single light source from multiple locations in 3 or 4-way applications.

This switch* features enduring Microban® antimicrobial technology that works to reduce the growth of bacteria, around the clock, for the lifespan of the product.

* Existing inventory of switches, dimmers and plastic wall plates from the adorne® Collection at some partner locations may not yet include Microban® protection. To confirm that a specific Legrand product is protected with Microban®, check that the exterior of the product packaging includes a green dot or a "Protected with Microban" label.

Made exclusively for use with screwless Wall Plates from the adorne® Collection, sold separately.

No antimicrobial efficacy claims are being made or are valid with respect to products sold in Canada.

Color Magnesium
  • Free Shipping on Orders Over $49

Quantity

In Stock

Add To Cart Button Ready

Where To Buy
  • Send
  • Save as PDF
  • Add to favorites"> Remove from favorites
    Add to favorites Remove from favorites

Features

  • Helps fight the growth of stain and odor-causing bacteria through the invisible and continuous product protection of Microban® antimicrobial technology
  • For complete installation, device must be paired with an adorne® screwless Wall Plate (not included). Available in a range of contemporary colors and stunning finishes.
  • Installs in 15 minutes or less, fitting into an existing electrical box. No new wiring required for typical installation.
  • Uses SensaSwitch technology to automatically turn lights off after you leave. (Auto shut-off can be set from 5 to 30 minutes after vacancy.)
  • Usable in single-pole or 3-way applications. Must be paired with another SensaSwitch or SensaDimmer for 3-way control.
  • More color options available to fit any style, including finishes to match current hardware and lighting trends.

Specifications

General Info
Product Line Pass & Seymour
Color Magnesium
UPC Number 785007023282
Country Of Origin China
Features Motion Sensor, Antimicrobial Protection
Switch Type Motion Sensor
Number of Switches 1
Standard cULus
Warranty Type Limited Lifetime Warranty
Dimensions
Product Width US 1.77 in
Product Depth US 1.85 in
Product Height US 2.66 in
Technical Information
Connector Screw Terminals
Sensor Type Vacancy
Number of Gangs 1
Number of Poles Single Pole, 3-Way
Mounting Type Box
Sensing Range 180° 600 sq ft
Connection Type Internal Pressure Plates
Sensitivity Major Motion 35' Minor Motion 20'
Load Incandescent or LED lamp: 0-600 Watt Fluorescent lamp: 0-600 VA Fan Motor: 1/6 hp
Environmental Conditions Residential Indoor Use Only

Reviews

Rated 4 out of 5 by from Works - requires the same model for multi-way I found these worked well. I didn't realize at first that the second multi-switch must the same model, not another model or a simple 3/4 way switch. I also found that the switch didn't work well w/o adjusting the time settings. The switch would either conflict or run into a race condition where both switched switched "off" at the same time and it sent both switches into a non-functioning mode - button didn't work at all. Resetting the switch (manually) or via a power-off, and power-on (breaker) appeared to reset the switches, and both would work once, and then go into a hung mode. Adjusting the timing of the switches via the documentation so that they were not using the default times from the factory, caused both switches to work great. I have not tried to connect the white wire to make the light work yet.
Date published: 2020-12-15
Rated 1 out of 5 by from This switch does not operate correctly. This Adorne sensor switch is poorly engineered. This sensor switches activates randomly throughout the day and night. I have replaced the “automatic” sensor switch twice, and they all randomly switch on and off. How can a reputatable manufacturer market a switch that does not even operate correctly?
Date published: 2018-12-09
  • y_2023, m_11, d_27, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.37
  • cp_1, bvpage1
  • co_hasreviews, tv_2, tr_2
  • loc_en_US, sid_ASVS12M4, prod, sort_[SortEntry(order=HELPFULNESS, direction=DESCENDING), SortEntry(order=POSITIVE_FEEDBACK, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_legrand
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 3ms
  • REVIEWS, PRODUCT

Questions & Answers

For a three way operation, can I have a non motion switch on the other gang or do I need to have both motion switches on each end?

Asked by: Nessa
Hello, Both locations will have to be the ASVS12W4 Vacancy sensors in order for them to work in a 3 way. If You want a motion sensor the model is ASOS32W4, You will need two of the same device in order for them to work in a 3 way. Hope this helps, Have a great day.
Answered by: Legrand Techincal Support
Date published: 2021-03-25

can this be paired with a half switch in the one-gang plus wall plate? I tried a half switch with a softap and the back of the softap was too large.

Asked by: 1942
The sensor back body is too large for it to fit in the 1 gang+ wallplate with the 1/2 size Paddle switch. You can use the Paddle or Whisper mechanical switches because their body is standard size.
Answered by: Legrand Technical Support
Date published: 2019-02-19

Can the length of time the light is on be adjusted?

Asked by: JoeB
Hello, The time can be adjusted on the ASVS12W4. 5 minute (Min)-30 minute (max). Hope this helps, Have a great day.
Answered by: Legrand Techincal Support
Date published: 2019-02-11

I need 2 switches in 1 place, believe it's called 2 gang. the motion sensor switch manual for bathroom light, and timer switch for heating lamp can those be placed next to one another, with one wall plate -of course 2 holes?

Asked by: yolanda
Hello, Yes, the motion sensor and timer switch can be installed next to each other in a 2 gang configuration. Hope this helps, Have a great day.
Answered by: Legrand Techincal Support
Date published: 2021-03-25

How long does the sensor stay on at max and minimum settings? How far is the sensor range?

Asked by: ChrisM
Thank you for your question regarding the adorne Manual ON/Auto OFF Motion Sensor Switch(Model # ASVS12M4). The vacancy sensor has an Adjustable Time Delay - 5 sec (test mode), 5 minute min to 30 minute max setting and it has a maximum coverage range of 180 degrees and a coverage area of 600 sq. ft. Minor motion has a range up to 20' and major motion has a range up to 35'.
Answered by: Legrand Technical Support
Date published: 2021-03-25
  • y_2023, m_11, d_27, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.37
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_13
  • loc_en_US, sid_ASVS12M4, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_legrand
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 44ms
  • QUESTIONS, PRODUCT

You may also like...