Wireless Motion Sensor with Netatmo
064875
Pass and Seymour
Bazaarvoice SAP Hybris Integration Version 2.8.1
$68.99 USD
Smart Lighting lets you set the exact lighting you need, from anywhere, adding safety and convenience to your home. And delivering it all with unprecedented range and reliability, adorne® and radiant® with Netatmo leverage leading Netatmo technology to provide an ideal solution for larger homes with many smart products. Start with the Smart Gateway to establish a robust and dedicated mesh network, then add smart switches, dimmers and outlets to build a solution that perfectly fits a home’s unique space and needs.
Add this Wireless Motion Sensor to any wall or surface, indoors or out, to add safety, convenience and efficiency to your Smart Lighting with Netatmo solution. Automatically turning lights on when motion is detected, this battery-powered device can be mounted anywhere extra security and comfort is desired – no cutting or wiring required.
Made exclusively for use with the adorne® and radiant® with Netatmo Smart Lighting solutions.
Quantity
In Stock
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Smart Gateway REQUIRED
- Turns lights on automatically when motion is detected within a 6.5 ft. - 26 ft. range of the sensor. Then turns lights off automatically once motion is absent
- Features an adjustable time delay (15 seconds to 15 minutes) for turning lights off
- Made for indoor/outdoor use, the battery-powered motion sensor installs easily anywhere desired. Simply mount to the wall (screws not included) -- no cutting or wiring required
- Part of the adorne and radiant with Netatmo solutions, which flexibly fit a home's unique needs with a variety of supported smart switches, dimmers and outlets (including other wireless switches and dimmers)
- Must be used in conjunction with installed Smart Switches, Dimmers and/or Outlets with Netatmo
- Compatible with other smart products through Amazon Alexa, Google Assistant and Apple HomeKit, as well as with home automation systems
- Features ultra-reliable performance through a robust and dedicated mesh-network
Specifications
General Info
Product Line | Pass & Seymour | ||
Replaced by Part Number | |||
Color | White | ||
Finish | Glossy | ||
Country Of Origin | France | ||
Features | Motion Sensor | ||
Works With | Amazon Alexa, Apple Home Kit, Google Assistant | ||
Application Sector | Residential/Commercial | ||
Standard | IK04, IP42, NFC 15-100, RoHS, FCC, IC, IEC | ||
Warranty Type | 2-Year Limited Warranty | ||
Type | Occupancy Sensor |
Additional Information
RoHS Conformant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. |
Listing Agencies / 3rd Party Agencies
IEC | Yes | ||
FCC Compliant | Yes |
Technical Information
Actuator | Motion Sensor | ||
Frequency Rating | 2.4 to 2.4835 GHz | ||
Connection | Wireless | ||
Sensor Type | Occupancy | ||
Enclosure Type | Weather Resistant | ||
Power Consumption | < 10 m:WATTS | ||
Supply Voltage | 240 V | ||
Operating Temperature | 41°-113°F | ||
Sensing Range | 6.5 - 26 ft | ||
Environmental Conditions | 85% (relative humidity, non-condensing) | ||
Storage Temperature | 41° - 113° F |
Resources
Cutsheet
Installation Instructions
Supporting Document
Brochure
Instruction Sheet
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Can I configure two wired smart switches to behave as a 3 way together, or is this only for wireless switches?
The WNRL10 can only be used with the wireless switch(WNRL23) to create a 3way.
Date published: 2022-06-23
I already have a Legrand whole house light controller as well as 20 Adorne switches and dimmers. Can I just upgrade the whole house controller with a Netatmo gateway or would I have to start over again with all new Netatmo switches and dimmers?
You would have to start over as both platforms use completely different wireless communication technologies. You can, however have both platforms coexist in your home if need be.
Date published: 2022-06-21
How long does the battery last, and does the app provide a warning when it gets low?
Yes, the Home + Control app will send you a notification when the battery level is low. The notification should be sent when the battery has about 3 months of life left. That way it'll give you time to get some batteries and do the swap before the battery goes to 0%.
Date published: 2022-08-18
Is WNRL10WH a Zigbee device?
Yes, it uses a Zigbee Protocol to communicate with the Legrand Netatmo Gateway.
Date published: 2022-04-01
will this dimmer work with over 150w led load ?
The WNRL50 Smart Tru-Universal Dimmer with Netatmo; is rated for LED: 450W's.
Date published: 2022-03-15
The switch has a steady amber light and no longer functions - how can I repair/reset it?
See the attached for resetting the wireless switch.
Radiant products
1.844.957-3783 opt 1, then 2
Mon - Fri: 8am - 6pm EST
(excluding holidays)
Email Us - tech.support@legrand.us
Date published: 2022-02-18
Can the Netatmo Smart Switch be used with a 3-way switch like the TM873W? I'm replacing switches in an existing 3-way config. I'd prefer to have my 3-way wired in and not be on batteries, as well as spend $3 instead of $36. I think the WiFi version can.
A Netatmo 3way would be using one WNRL10WH and one WNRL23WH. You can not use a standard 3way switch in this application.
Date published: 2022-02-18
What communications protocol does it use? And what is the temperature range it is rated for, can it be used below 0?
The WNRR20 uses a Zigbee Protocol to communicate with the Gateway and is designed for dry indoor use only.
Date published: 2022-02-02
Are you able to use 2 of these in a 3-way setup? I do not want to use wireless because of batteries. Thank you!
The only way to create a 3way is using the the Wireless device. The battery is designed to last approximately 8 years.
Date published: 2022-04-03
Can this family of devices support multi-location of dimmers and/or switches? I have an application with 6 dimming locations.
Yes, to dim from all of your 6 locations, you would use one WNRL50WH dimmer and 5 of the wireless WNRL63WH dimmers.
https://www.legrand.us/wiring-devices/light-switches-and-dimmers/smart-tru-universal-dimmer-with-netatmo/p/wnrl50wh?text=wnrl50wh
https://www.legrand.us/wiring-devices/radiant-collection/dimmers/smart-tru-universal-dimmer-with-netatmo/p/wnrl63wh
Date published: 2022-01-10
just had electrician install 2 of these side by side. When he left they were flashing amber & ready to set up. I tried to set them up but must have messed it up and now I can't get them to turn amber to save my life! please help
I believe you may have the WWRL50WHCCV2 Smartlights dimmer, which blinks amber. To reset it, press and hold the minus portion of the dimmer bar for 15 seconds and it will start blinking again.
Radiant products
1.844.957-3783 opt 1, then 2
Mon - Fri: 8am - 6pm EST
(excluding holidays)
Email Us - tech.support@legrand.us
Date published: 2021-12-10
Would this be able to be paired in a 3-way setup with the radiant wired remote dimmer (HMRW)? I would prefer to have a wired connection instead of the battery powered option (WNRL23/63) Are there 3-way wired options for this dimmer?
The HMR remote dimmer will not work with the Netatmo line of Wi-Fi dimmers to create a 3way.
Date published: 2021-12-08
Can (2) of these be hard wired in a 3-way configuration?
No, to create a 3way you would use the WNRL10WH in location and the WNRL23WH(wireless switch), in the other location. The WNRL23WH is battery operated so can be installed anywhere in the home and then connected to the WNRL10WH through the Legrand APP.
Date published: 2022-04-05
downloaded Legrand App and it tells me iCould is synchronizing. But it never synchonizes.
You also need one of the Netatmo Gateways(WNRH1WH) installed to link up the dimmer through the Legrand APP. If you have the gateway and you're still having issues, please contact Technical Support for assistance:
Radiant products
1.844.957-3783 opt 1, then 2
Mon - Fri: 8am - 6pm EST
(excluding holidays)
Email Us - tech.support@legrand.us
Date published: 2021-11-01
Hello, I bought this product and I want to make it 3-way (being able to control the lights at 2 different locations). I was hoping that you could show the product that is needed to make this a working 3-way. I know its not 2 of these switches.
The WNRL50WH can be paired with either the WNRL63WH Wireless dimmer or the WNRL23WH Wireless switch to complete your 3way application.
https://www.legrand.us/wiring-devices/radiant-collection/dimmers/smart-tru-universal-dimmer-with-netatmo/p/wnrl63wh?text=wnrl63wh
https://www.legrand.us/wiring-devices/radiant-collection/smart-lighting/wireless-smart-switch-with-netatmo/p/wnrl23wh?text=wnrl23wh
Date published: 2021-11-16
How many devices can you hook up to one gateway?
Up to 99 devices can be linked to the gateway.
Date published: 2022-05-04
Is this rated for a 15 amp motor load?
Hello,
Yes, this switch is rated for 1/2 HP motor.
Thank you,
Date published: 2021-07-19
Does this switch has a gentle on and off like Lutron does? or is it just on and off instantly?
For the HomeKit integration, will there be a Firmware update soon to allow switch 'type'? Currently, these only operate as a 'light' in HomeKit, instead of the standard switch/fan/light options typically found in the outgoing HKRL10 smart light switches.
Bazaarvoice SAP Hybris Integration Version 2.8.1
You may also like...
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
WNRL43WH | radiant Collection
Add to any wall for easy, full-scene lighting control. Part of the radiant with Netatmo solution.
$46.64