text.skipToContent text.skipToNavigation

DLM Cat5 Network Power Booster

The LMPB-100 Digital Power Booster includes a high-efficiency switching power supply to add power to a DLM local network. It can be used with LMFC fixture controllers or any other Wattstopper Digital Lighting Management (DLM) controllers to allow integration of occupancy sensors, daylighting sensors and switches for energy-efficient lighting control. This device does not include a relay for load control.

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

Plenum-rated controller with switching power supply
Can add power to any DLM Cat5e local network
Supports LMFC fixture integrated controllers
Designed to mount inside an LMZC-301 zone controller to increase low voltage power to a DLM local network
Plugs to other components using Cat5e cables with RJ45 connectors eliminating wiring errors

Specifications

General Info

Color	White
Product Series	LMPB
Type	Power Supply
Application Sector	Commercial
Product Line	Wattstopper
Country Of Origin	China
Installation Location	Ceiling
Warranty Type	5-Year
Standard	UL 2043, cUL, FCC part 15, RoHS
UPC Number	754182938933

Dimensions

Product Depth US	2.0 in
Product Height US	4.0 in
Product Volume US	46.5 cu in
Product Width US	3.0 in
Product Weight US	0.4 lb

Additional Information

RoHS Compliant

Yes

This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.

Technical Information

Current Draw	150 mA
Number of Connections	3
Connector Type	RJ-45
Indoor/Outdoor	Indoor
Input Voltage	120/230/277 VAC
Line Frequency	50 Hz, 60 Hz
Mounting Type	1/2 in Knockout, 4 in J-Box, Zone Controller
Operating Temperature	0°-60°C, 32°-140°F
Operating Temperature Max	140 °F
Operating Temperature Min	32 °F
Operating Humidity	5-95% RH (Non-Condensing)
Storage Temperature	23° - 176° F

Resources

Does using an LMPB refresh the 1,000' CAT5 limit? For example, using an LMCP, run 1,000' max to high bay sensors, installing an LMPB and running another 1,000' max.

Asked by: Dan

Hello Dan, The LMPB-100s purpose is to add unswitched 150mA @24vdc to the IRb, a single IRb is 1000' max

Answered by: Tier 1 Tech Support

Date published: 2023-08-23

Recently Viewed

Old Work Switch and Outlet Box with Quick/Click

S118W | Pass and Seymour

Durable, impact-resistant thermoplastic box complemented by innovative extras that cut installation time. Single Gang, Old Work Switch and Outlet Box with Swing-Bracket for mounting. Adjusts from 1 1/4" down to 1/8". Two Auto/Clamps on Each End. 100 pack.

View Details