adorne® 0-10V Touch™ Dimmer
ADTH4FBL3PW4
adorne Collection
adorne® 0-10V Touch™ Dimmer is rated
out of
5 by
2.
Bazaarvoice SAP Hybris Integration Version 2.8.1
$126.56 USD
Perfect anywhere you'd like to turn lights on and off with the simplest touch, while also enjoying the ability to dim. Featuring a translucent glass-like face for a modern feel, control your light by simply pressing a finger to the center circle to turn lights on/off, or use the arrows on the side to dim. Use the device on its own to control a light or fixture from a single location, or pair with a 3-way switch to control a single light source from two locations. Pair with the matching Touch Switch for a consistent control-style throughout a room, or your entire house. Made exclusively for use with screwless Wall Plates from the adorne® Collection, sold separately.
Quantity
In Stock
Added to Your Shopping Cart
- Send
- Save as PDF
-
FavoriteAdded to Favorites Go to favoritesRemove from favorites?
Features
- Installs in 15 minutes or less, fitting into an existing electrical box. No new wiring required for typical installation.
- For use with 0-10V bulbs, and features intuitive touch control for turning on/off, and adjusting light levels.
- More color options available to fit any style, including finishes to match current hardware and lighting trends.
- Complete the look with a stunning, screwless adorne® Wall Plate, not included. Available in a range of contemporary colors and finishes. Coordinate with other designer switches & outlets.
Specifications
General Info
| Product Line | Pass & Seymour | ||
| Color | White | ||
| UPC Number | 785007055962 | ||
| Country Of Origin | China | ||
| Number of Switches | 1 | ||
| Standard | cULus, | ||
| Warranty Type | Limited Lifetime Warranty |
Technical Information
| Connection | Screw Terminals | ||
| Number of Gangs | 1 | ||
| Number of Poles | Single Pole, 3-Way | ||
| Wattage | 700 W | ||
| Mounting Type | Box | ||
| Voltage | 0 V, 10 V | ||
| Connection Type | Internal Pressure Plates | ||
| Load | Fluorescent/LED |
Resources
Supporting Document
Installation Instructions
Reviews
Rated 5 out of
5
by
LOUIS from
SEXIEST DIMMER EVER!
This is my favorite dimmer, it is absolutely elegant. The sexiest dimmer on the market, baring none. You can't find better quality at any price, and no other company can come close to the Adorne line of switches and dimmers.
Date published: 2021-04-06
Rated 5 out of
5
by
Leah from
So happy with our purchase
I’m so glad I found Legrand products. We love our touch dimmer. It was easy to install and is super stylish. We can’t wait to replace all our switches and plugs with the adorne line.
Date published: 2020-09-11
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
hello I want to have a dimmer on both sides of the room acting as a 3way. and my llamas have 0-10v dimming do you have a set of two dimers to make them work together
When using our 0-10V dimmers, you can only dim from one location in your 3way. You have to use one dimmer and one 3way switch.
Date published: 2022-04-26
Is this switch compatible with a standard adorne 15amp paddle switch in a 3 way setting? If not which switch is?
The ADTH4FBL3PG4 dimmer can be used with the Paddle switch in a 3way, if you are controlling a 0-10V light fixture.
Date published: 2022-02-01
Is a ground wire required? My power supply (Mean Well PWM-90-24) does not require one, and I don't have a ground wire in my wall.
This is an electronic dimmer so it will require a Ground connection to work correctly.
Date published: 2022-01-06
NEUTRAL AT SWITCH..?!?!?!?!
A Neutral wire is required for the Touch 0-10V dimmer(see attached wiring diagrams).
Date published: 2021-07-01
What is the minimum load of this dimmer? It switches an indirect (strip) LED on and off but does not dim it up or down.
The ADTH703TUW4 minimum load requirements are:
Min. load rating:
• Incandescent: 20W
• MLV: 20VA
• ELV: 20W
• EFL: .08A
• CFL and LED: 6W
I would make sure that the LED's are "dimmable"
Date published: 2020-02-10
My 0-10v when hooked up will come on but can not shut off or dim, face does not light up and it is grounded
Make sure You Have a Hot wire going into the terminal labled Hot. A neutral wire in the terminal labled White. The load wire in the terminal labled Load. And connect Your Violet and Gray wires to the Violet and Gray wires on Your 0-10 volt dimming ballast.
Feel free to contact tech support at 1800 223 4185 option 1
Date published: 2019-11-15
I'm installed 3 touch dimmer but it's not working What is the reason that any dimmer work?
Thank you for your inquiry regarding our Touch 0-10 V dimmer. Is the device snapped into the bracket? If it is not snapped in to the grounded bracket, the device will not function. Additionally, this is a 0-10 V dimmer so it needs to be connected to a 0-10 V dimming ballast. If that is not the type of install you have, you may need a different dimmer. Feel free to contact us via phone at 800-223-4185 or email at tech.support@legrand.us. Hope this helps!
Date published: 2018-04-16
You may also like...
Favorite
Added to Favorites
Go to favorites
Remove from favorites?
AAAL1G4 | adorne Collection
The Accent Nightlight is a stunning addition to any adorne product. It provides a wash of light below the wall plate, acting as a nightlight or as an accent light.
$22.68
Favorite
Added to Favorites
Go to favorites
Remove from favorites?
AWP1G2PW4 | adorne Collection
A crisp profile and clean palette make this wall plate fit for any d�cor or design style.
$11.89
Favorite
Added to Favorites
Go to favorites
Remove from favorites?
ASPD1532W4 | adorne Collection
The Paddle Switch features a simple up and down motion, allowing you to turns lights on and off with ease.
$7.55