adorne® 700W sofTap® Tru-Universal Dimmer, Magnesium, with Microban®
Bazaarvoice SAP Hybris Integration Version 2.8.1
$90.08 USD
Turn lights on or off, or even dim them, with just a soft tap of a finger thanks to inventive micro-movement technology. Plus, as a Tru-Universal Dimmer, this dimmer switch self-calibrates to work with virtually any 120V dimmable bulb or fixture (excludes 0-10V). Always adjust to the precise light level you want, without the flicker.
This dimmer* features enduring Microban® antimicrobial technology that works to reduce the growth of bacteria, around the clock, for the lifespan of the product.
* Existing inventory of switches, dimmers and plastic wall plates from the adorne® Collection at some partner locations may not yet include Microban® protection. To confirm that a specific Legrand product is protected with Microban®, check that the exterior of the product packaging includes a green dot or a "Protected with Microban" label.
Made exclusively for use with screwless Wall Plates from the adorne® Collection, sold separately.
No antimicrobial efficacy claims are being made or are valid with respect to products sold in Canada.
Quantity
In Stock
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Helps fight the growth of stain and odor-causing bacteria through the invisible and continuous product protection of Microban® antimicrobial technology
- For complete installation, device must be paired with an adorne® screwless Wall Plate (not included). Available in a range of contemporary colors and stunning finishes.
- Installs in 15 minutes or less, fitting into an existing electrical box; neutral wire required.
- Perfect for adding precise light level control – all it takes is a soft tap to turn on/off or adjust brightness.
- Works with virtually any 120V dimmable bulb or fixture (excludes 0-10V).
- Self-calibrates when you select your fixture's lighting type, automatically setting the appropriate minimum voltage to eliminate flicker and poor performance.
- Usable in both single-pole and 3-way applications.
- More color options available to fit any style, including finishes to match current hardware and lighting trends.
Specifications
Product Line | Pass & Seymour | ||
Color | Magnesium | ||
Finish | Frosted | ||
UPC Number | 785007023176 | ||
Country Of Origin | China | ||
Features | Antimicrobial Protection | ||
Switch Type | sofTap | ||
Number of Switches | 1 | ||
Device Front Face Size | Full-Size | ||
Device Backbody Size | Plus-Size | ||
Application Sector | Residential | ||
Warranty Type | Limited Lifetime Warranty | ||
Type | Dimmer |
Product Width US | 1.79 in | ||
Product Depth US | 1.77 in | ||
Product Height US | 4.2 in |
Electrical Rating | 120V 1600VA (MLV), 120V 16A (Fluorescent), 120V 450W (CFL), 120V 450W (LED), 120V 5A (Fan Control), 120V 700W (ELV), 120V 700W (Halogen), 120V 700W (Incandescent), 120V 8A (EFL) | ||
Connection | Screw Terminals | ||
Number of Gangs | 1 | ||
Bulb Compatibility | CFL, Fluorescent, Halogen, HID, Incandescent, LED, Universal, Xenon | ||
Number of Poles | Single Pole 3-Way | ||
Wire Size | #14 - #10 AWG | ||
Requires Neutral Wire | Yes | ||
Indoor/Outdoor | Indoor | ||
Wattage | 700 W | ||
Mounting Type | Box | ||
Connection Type | Internal Pressure Plates |
Resources
Cutsheet
Installation Instructions
CAD Drawings
Supporting Document
Sell Sheet
Customer CAD PDF
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
I have an older home built in 1978 and the single light I wish to use this dimmer with has hot, neutral and ground wires only. The light is LED and specified ELV only which I believe is supported by this model. I have not been able to successfully wire it
Is it normal to feel warm when dimmer is off? I have one ADTP703TUW4 alone and it is cool. But in another electric box there are two ADTP703TUW4 side by side, they are warm to touch no matter on or off. My room temp is 72F. Those warm dimmers are 107F.
I have some lights permanently plugged into an outlet that is controlled by a switch. Could I wire the dimmer to the outlet to dim the lights?
Will the Legrand universal dimmers work with Cree LED medium base A19 lamps?
I have softap dimmers on lights containing magnetic transformers with MR16 led bulbs, 12w. When the power goes out and the home is re-energized the breaker (15a) trips. What causes this. They worked for 3 yrs.
What is the boot up procedure that the switch goes through when first powered up? I hear several clicks and dimmer lights cycle up/dn. Does it power up the lights a time or two or three before it settles down?
I need to for this dimmer to work in a 3 way setting. Which adorne switch is compatible and does the 2nd switch need to run off the same neutral?
Im using DTTP703TUW4 dimmer switch with magnetic driver and it wouldnt work. It powers up and shuts down. is it compatible? or I need some switch which is compatible with magnetic driver? Thanks
I just installed this sofTap dimmer switch and it turns on and off and dims as it should. It does, however, 'click' when I turn the switch on and off. What is causing this, please? Should I be concerned? Thank you.
Installed this with WAC InvisiLED Pro2 24v (LED-TX24) tape light/ WAC 96 Watt Dimmable Power Supply (EN-24100-RBT2-T). Even after setting to low level trim, the lights flash when dimmed. Is there a minimum load for these dimmers? Other suggestions?
Im replacing a lutron 3way with a legrand ADTP703TUG4. The wall has 4 wires. (black, white, red and bare). The switch has sockets for hot, neutral, 3 way and pole? what goes where? the diagram doesnt help
I'm currently using the adorne® 20A 4-Way Paddle™ Switch ASPD2042G4 pairing with 02 Adorne 3-Way Paddle Switches. Can I replace one of the 3-Way Paddle Switches by 01 adorne® 700W sofTap™ Tru-Universal Dimmer ADTP703TUW4?
I just completed a complete remodel of my Kitchen. I used all Adorne Legrand devices. I am controling my LED undercounter lighting with a soft tap universal dimmer. My Kicher undercounter lighting is buzzing. did not buzz with conv. dimmer
I have an ADTP703TUW4 in my bathroom that had been working great, but it has stopped retaining the LDL (last dim level), so whenever I turn the light on with the On/Off pushbutton it turns on on the lowest dimming setting. How can I fix this?
Will this switch ADTP703TUM4 dim this light? https://www.lumens.com/geos-led-flushmount-by-dweled-uu572078.html I've got your paddle dimmer installed and it flickers. Thanks
Does this dimmer REALLY work with standard 110 VAC 6W LED bulbs? I have several of your LED dimmers that will only reduce the brightness of the LED bulbs to about 75% of full brightness - not very much.
Can you use with ceiling fan light?
Can this be used as a 3-way switch with dimmers on both sides?
I have a sofTap dimmer with two chandeliers with 38 pieces beach one 6w LED dimeable bulbs. It is getting hot. Why is the reason?
The light fixture I am installing requires a 1-10v dimmer. Will this dimmer works?
Will this dimmer work with the following Commercial Electric LEDs? https://www.homedepot.com/p/Commercial-Electric-Ultra-Slim-6-in-New-Construction-and-Remodel-Color-Selectable-Canless-LED-Recessed-Kit-4-Pack-91365/306079856
Hi - I'm using this dimmer (ADTP703TUW4) with a regular 3-way softap switch (no dimmer). Can these be used in either the master or remote locations? I can get mine to work at first but then the softtap switch stops working after 4-5 pushes.
I have a 560 watt LED load, will this dimmer work with this load? I know a lot of dimmers I have looked at have a lower led threshold than incandescent and didn't know if the 700watt rating was across the board or incandescent only.
We have the dimmer Legrand ADTP703TUM4. Can we use wall plate Legrand AWM1G2MS4 for this dimmer ?
My electrician just installed 7 of these in our home and they are all extremely hot to the touch (180+). 4 of them are running six 10w cans, the rest are lower loads (one just a single 10w can). Reverse phase setting helped slightly. Anything else to try?
I have a soft tap dimmer set up in a 3 way with a whisper switch at another location in a 3 way. The lights do not come on at all. I've installed according to the manual, do I need another dimmer switch on the other end for this to work?
Can the dimmer be paired with a wave switch for a three-way set up? Thank you.
Are the Adorne dimmers compatible with this LED Downlight?? file:///C:/Users/JHarrington/Downloads/RDL_4RND_9_CTS-97_Downlighting%20Dimmer%20Compatibility.pdf
I purchased serveral ADTP703TUM4 to operate my living room receseed lights, I currently have 15 Watt LED retrofit recessed lights, the new switch turns the lights on but they do not dim or even turn off? what are the specification of lights I need?
can you use this dimmer with an led light with 0-10v dimmer wires
Bazaarvoice SAP Hybris Integration Version 2.8.1