adorne® 700W sofTap™ Tru-Universal Dimmer
ADTP703TUM4 adorne Collection
adorne® 700W sofTap™ Tru-Universal Dimmer is rated out of 5 by 25.
Bazaarvoice SAP Hybris Integration Version 2.8.1
Turn lights on/off, or dim, with just a soft tap of a finger, thanks to inventive micro-movement technology. Plus, as a Tru-Universal Dimmer, it works with virtually any 120V dimmable bulb or fixture, adjusting to the precise light level you want, without the flicker. Made exclusively for use with screwless Wall Plates from the adorne® Collection, sold separately.
Added to Your Shopping Cart
WHERE TO BUY
- Installs in 15 minutes or less, fitting into an existing electrical box. No new wiring required for typical installation.
- Perfect for adding precise light level control -- all it takes is a soft tap to turn on/off or adjust brightness.
- Works with virtually any 120V dimmable bulb or fixture.
- Self-calibrates when you select your fixture's lighting type, automatically setting the appropriate minimum voltage to eliminate flicker and poor performance.
- More color options available to fit any style, including finishes to match current hardware and lighting trends.
- Complete the look with a stunning, screwless adorne® Wall Plate, not included. Available in a range of contemporary colors and finishes. Coordinate with other designer switches & outlets.
|Country Of Origin||China|
|Product Line||Pass & Seymour|
|Number of Switches||1|
|Warranty Type||Limited Lifetime Warranty|
|Product Width US||1.77 in|
|Product Length US||4.2 in|
|Product Depth US||1.79 in|
|Number of Poles||Single Pole, 3-Way|
|Number of Gangs||1|
|Connection Type||Internal Pressure Plates|
10 Tips for Your DIY Designer Switches & Outlets Projectpdf
Cleaning Instructions for Wiring Devicespdf
Meet Your Matchpdf
adorne Collection Dimmer Compatibility Chartpdf
adorne Limited Lifetime Warrantypdf
adorne Product Comparison Chartpdf
adorne Room Planner Checklistpdf
adorne sofTap Tru-Universal Dimmer Bulb Compatibilitypdf View More
Customer CAD PDF
Guide Form Specifications
Rated 2 out of 5 by Mountainman from Love the Look- still needs work on the value Love the look and design of the switches. Don’t like how the dimmer has a dim (no pun intended) locator light vs. the regular switch- which isn’t visually appealing and super irritating considering the price. Looks really bad on a 2+ gang switch when they are right next to each other. Also- my tru universal won’t turn on my LED pendants unless it starts on the highest power vs. the lower end. So much for versatility. Once again as many reviewers expressed- at this price point- we demand perfection and flawless execution as there’s nothing out there more expensive. GET IT RIGHT!
Date published: 2020-02-03
Rated 5 out of 5 by Mvuks from Dim lighting I am so happy with the soft top dimmer switch that I had got last week the dimmer is very easy to use. There was no need for a professional installation as the instructions were very clear it actually worked on the first try, Something I’m not that familiar with After using it I plan on going buying more for my downstairs game room and are outside party room. It’s certainly can set the mood for whatever occasion with a push of a button
Date published: 2018-10-25
Rated 4 out of 5 by lon123 from sofTap™ Dimmer Switch, 700W Tru-Universal, White Received this switch about a week ago, installed switch overall it works great made very well good and solid no cheap materials only down side of it for me was wall plate does not sit flush on wall tried adjusting several times still sits from wall about 1/8'' to 3/16''
Date published: 2018-10-17
Rated 5 out of 5 by Judyh from These switches are awesome! I replaced all the switches and outlets in my house to legrand adorne and I looks fresh and modern! What a difference!
Date published: 2018-04-04
Rated 5 out of 5 by MrsLady from GORGEOUS These are beautiful and functional. I am doing a whole home remodel and I have put Legrand switches and dimmers in every room. They are so clean and stylish, and they bring a really nice polished touch to every space. Fan for life!
Date published: 2018-08-12
Bazaarvoice SAP Hybris Integration Version 2.8.1
Can this be used as a 3-way switch with dimmers on both sides?
Not very well. I have two 3way switches and the work sporadically. Usually have to reset at main switch.
Date published: 2020-04-14
I have a sofTap dimmer with two chandeliers with 38 pieces beach one 6w LED dimeable bulbs. It is getting hot. Why is the reason?
I suggest you contact an electrician to figure that out. I am a homeowner that used the legend products and we love them with no issues.
Date published: 2021-02-02
The light fixture I am installing requires a 1-10v dimmer. Will this dimmer works?
The universal dimmer is not designed to handle 0-10V fixtures. Here are our available options in Magnesium: https://www.legrand.us/search.aspx?q=adpd4fbl3p2m4 https://www.legrand.us/search.aspx?q=adtp4fbl3pm4 https://www.legrand.us/search.aspx?q=adth4fbl3pm4
Date published: 2020-02-19
Will this dimmer work with the following Commercial Electric LEDs? https://www.homedepot.com/p/Commercial-Electric-Ultra-Slim-6-in-New-Construction-and-Remodel-Color-Selectable-Canless-LED-Recessed-Kit-4-Pack-91365/306079856
Yes, the universal adorne dimmer is designed to work with this type of LED recessed fixture.
Date published: 2020-02-05
Hi - I'm using this dimmer (ADTP703TUW4) with a regular 3-way softap switch (no dimmer). Can these be used in either the master or remote locations? I can get mine to work at first but then the softtap switch stops working after 4-5 pushes.
When using True Universal Dimmer in a 3 way application, with an electronic switch (Soft Tap, Touch, or Wave), the HOT wire MUST be connected to the electronic switch, and the dimmer MUST be connected to the load. Reversing this wiring (HOT to Dimmer and LOAD to Switch ) will cause the switch to stop functioning. The switch requires 120 VAC to operate. When the voltage to the switch is lowered by using the dimmer, the electronics in the switch stop functioning. This only applies when using an electronic switch. A standard switch (Paddle, Push and Whisper, for example) is not effected.
Date published: 2020-01-02
I have a 560 watt LED load, will this dimmer work with this load? I know a lot of dimmers I have looked at have a lower led threshold than incandescent and didn't know if the 700watt rating was across the board or incandescent only.
The maximum wattage rating depends on what type of lights(LED's) you are controlling. Max. load rating: • Incandescent: 700W • MLV: 500VA • ELV: 700W • EFL: 5.5A • CFL and LED: 450W(screw in bulbs)
Date published: 2019-11-01
We have the dimmer Legrand ADTP703TUM4. Can we use wall plate Legrand AWM1G2MS4 for this dimmer ?
Yes, AWM1G2MS4 is correct.
Date published: 2019-10-01
My electrician just installed 7 of these in our home and they are all extremely hot to the touch (180+). 4 of them are running six 10w cans, the rest are lower loads (one just a single 10w can). Reverse phase setting helped slightly. Anything else to try?
I would suggest contacting adorne Technical Support to go over the installation and possible adjustments that can be made to the universal dimmers. adorne products 1.800.223.4185 opt 3 Mon - Fri: 8am - 8pm EST (excluding holidays) Email Us - email@example.com
Date published: 2019-07-30
I have a soft tap dimmer set up in a 3 way with a whisper switch at another location in a 3 way. The lights do not come on at all. I've installed according to the manual, do I need another dimmer switch on the other end for this to work?
The Softap dimmer is designed to be used with any 3way switch(not dimmer) for a 3way application. I would suggest contacting adorne Technical Support to try and troubleshoot your installation issue. adorne products 1.800.223.4185 opt 3 Mon - Fri: 8am - 8pm EST (excluding holidays) Email Us - firstname.lastname@example.org
Date published: 2019-07-30
Can the dimmer be paired with a wave switch for a three-way set up? Thank you.
The Softap SP/3W dimmer can be used with any 3way switch but seeing the Wave switch is electronic, the following applies: When using True Universal Dimmer in a 3 way application, with an electronic switch (Soft Tap, Touch, or Wave), the HOT wire MUST be connected to the electronic switch, and the dimmer MUST be connected to the load. Reversing this wiring (HOT to Dimmer and LOAD to Switch ) will cause the switch to stop functioning. The switch requires 120 VAC to operate. When the voltage to the switch is lowered by using the dimmer, the electronics in the switch stop functioning. This only applies when using an electronic switch. A standard switch (Paddle, Push and Whisper, for example) is not effected.
Date published: 2019-06-17
Are the Adorne dimmers compatible with this LED Downlight?? file:///C:/Users/JHarrington/Downloads/RDL_4RND_9_CTS-97_Downlighting%20Dimmer%20Compatibility.pdf
We have not tested our Softap universal dimmer with RDL-Topaz recessed downlights but with the dimmer's available adjustments(forward/reverse phase and high/low end trim) it should control them without issue. This is from RDL/4RND/9/CTS-97 spec sheet: Dimmable with leading-edge incandescent or LED style dimmers.
Date published: 2019-03-27
I purchased serveral ADTP703TUM4 to operate my living room receseed lights, I currently have 15 Watt LED retrofit recessed lights, the new switch turns the lights on but they do not dim or even turn off? what are the specification of lights I need?
The ADTP703TUM4 dimmer requires a separate Neutral wire so the dimmer can set itself to the load it's controlling and you need to verify that your LED's are "dimmable". The dimmer has a 6 watt minimum load requirement.
Date published: 2019-08-31
can you use this dimmer with an led light with 0-10v dimmer wires
This dimmer would not work for 0-10 volt. Instead you could use adtp4fbl3p. This model is only for 0-10 volt.
Date published: 2019-02-22
I have all touch magnesium switches. I need 3 dimmers. I can't find a 3 way touch dimmer in magnesium that I need. The soft touch does not have the glass face like the touch correct?
correct. we have no problem with 3-way soft touch dimmers. have also used soft touch dimmer wifi for area where there are 3 controls for hall lighting. programming can be a challenge but once done, it's great.
Date published: 2019-01-23
Can the sofTap switches and dimmers be paired with Paddle switches and dimmers in 3-way configurations? (Obviously not double-dimmer circuits, but these three possibilities: Paddle + sofTap, Paddle Dimmer + sofTap, Paddle + sofTap Dimmer.)
Yes You can use these Devices together. The Paddle products will work with our Non-wifi ready Softap products. Paddle + sofTap, (ASTP1532) Paddle Dimmer + sofTap,(ASTP1532) Paddle + sofTap Dimmer (ADTP703TU)
Date published: 2018-10-25
I purchased & installed the SOFTAP™ DIMMER SWITCH, 700W TRU-UNIVERSAL. I am using a BULBRITE ~ LED Filament, 7W, 800 Lumens, 2700K, Medium Base, Fully Dimmable bulb. The light will NOT dim. Have I purchased the wrong dimmer or the wrong bulb?
The dimmer that You are using is Our True universal dimmer. It is designed to dim a wide variety of bulbs. I would recommend calling into our tech support team at 1800 223 4185 and We can help troubleshoot these issues
Date published: 2019-10-07
I purchased this dimmer to replace a switch that controls 9 existing recessed lights that use 11W BR40 LED replacement bulbs. We cannot get the switch to work the dimmer indicator lights just flash. Do I have the wrong dimmer?
I had better luck with the paddle dimmer for CFL/LED, https://www.legrand.us/adorne/products/dimmers/adpd453lw2.aspx. The Softap, which I used initially for LEDs and LED replacements that are linked did not work well.
Date published: 2018-07-30
Can one dim in three way situation from both sides
Thank you for your question reagrding the adorne Softap dimmer(Model # ADTP703TUM4). With this dimmer in a 3way, you can only dim from one location and you would have to have a standard 3way switch on the other end of the circuit. To dim from both locations, you could use the Softap Master dimmer(ADTP700RMTUM1) in one location and the remote dimmer(ADTPRRM1) in the other.
Date published: 2018-07-13
Can I control a 3 speed ceiling fan (or 4 speed if you consider “off” a speed) with this switch?
No You cannot control a fan with this dimmer. This dimmer is made strictly for lighting loads. If You want to control the speed of the fan You would need to use our Paddle Fan speed control Model: AAFN4S16A https://www.legrand.us/search.aspx?q=aafn4s16a
Date published: 2018-06-26
Will this switch work with Just a hot and Neutral??
Thank you for your inquiry regarding our Tru Universal Dimmer. This device requires a hot, neutral, and load wire to the light. If you only have two wires in the box, you probably have a hot and a load wire to the light, with no neutral. The device needs the neutral to calibrate itself to the lighting load. Without a neutral, the device will not function properly. Hope this helps!
Date published: 2019-08-16
What dimmers switches do I use to control 2 sconces on the sides of bathroom mirror. One switch will be in the bathroom and one switch will be in the bedroom? Thanks
Thank you for your inquiry regarding our adorne sofTap tru universal dimmer. If you are looking to use one dimmer and one switch, you can use this dimmer with say an ASTP1532W4. If you are looking to dim from both locations, you must go with the wifi ready devices, which would be an ADTP700RMTUW1 and a ADTPRRW1. If you have follow up questions, feel free to contact us at 800-223-4185 or via email at email@example.com. Hope this helps!
Date published: 2018-12-18
I am trying to replace a normal adorne paddle switch with this dimmer switch. However, it only has a hot and 1-pole wire attached, and attaching them to the dimmer switch doesn't seem to work. Do I need to attach a white wire as well?
Thank you for your inquiry regarding our sofTap Tru Universal dimmer. This device needs the neutral wire connection, so you will need to attach the white (neutral) wire. The dimmer requires the hot, neutral, and load wire to the light. You must snap the device into the grounded mounting frame as well for it to work properly. Hope this helps!
Date published: 2019-01-02
Can this dimmer be used outdoors?
Thank you for your question regarding Legrand adorne dimmer(Model # ADTP703TUW4). The adorne products are all designed and rated for indoor use only.
Date published: 2018-05-04
Can the sofTap™ Dimmer Switch, 700W Tru-Universal be used with Sylvania 73835 Bright White 4000K Ultra RT4 50W LED Recessed Downlight Replacements?
Thank you for your question regarding adorne Softap Universal Dimmer. We have not tested this exact Sylvania LED with our dimmer but we have tested their similar models of recessed LED's and they worked fine so it should work without any issues. The dimmer usually responds well to them when it is put into Reverse phase(as explained in the instructions).
Date published: 2018-04-26
Can I put (2) 3way dimmers (SOFTAP™ DIMMER SWITCH, 700W TRU-UNIVERSAL, WHITE) to control the same light?
Good Morning, Unfortunately not. The ADTP703TU is a standard dimmer and must be paired with a switch in a 3-way setup. Hope this helps!
Date published: 2018-04-16
Can I put (2) 3way dimmer to control the same light, Or does only (1) 3way dimmer work with a 3way paddle switch?
Thank you for your question regarding Legrand Softap dimmer ADTP703TUW4. When using this dimmer in a 3way, it can only be use with a 3way switch. If you want to dim from both locations, you could use the Softap wi-fi ready master and remote dimmers(ADTP700RUTMW1 and ADTPRRW1).
Date published: 2018-04-16
Will the lscl453pwccv4, dimmer work with under cabinet, led , direct wire, light fixtures ,3 in a series, approximately 38 watts total?
The LSCL453PW dimmer is designed for 450W CFL/LED dimmable bulb and 700W Incandescent bulb only. If your under cabinet LED's have a low voltage transformer or driver, I would recommend using the universal dimmer to control them(RH703PTUW or RH703PTUTC): https://www.legrand.us/search.aspx?q=rh703ptuw
Date published: 2018-04-09
Do I need to use a magnetic or an electronic driver for the LED under cabinet lighting that I will be using with this # ADTP703TUM4 switch?
Hi David! Thank you for your question. If you are going to be using the LED Slimline lights in the adorne Under-Cabinet System then you will need to use our driver; making sure to use the appropriate driver for the length of lights you have. If you have up to 5 feet of lights, you will use the 30 Watt LED Dimmable Driver, with part number ALSLDR30TM1 in Titanium or ALSLDR30W1 in white. If you have up to 10 feet of lights, you will use the 60 Watt LED Dimmable Driver, with part number ALSLDR60TM1 in Titanium or ALSLDR60W1 in white. The LED Linear Light does not need a driver. Please let us know if you have any other questions. We're always happy to help!
Date published: 2018-03-30
Do you make any 4 way switches?
Thank you for your question. Yes, we definitely do have a 4-way switch available in the adorne collection. It's our Paddle switch style, with part number ASPD2042M4 in magnesium and ASPD2042W4 in white. Please let us know if you have any other questions. We're always happy to help!
Date published: 2018-03-29
You may also like...
AWC1G2SN4 | adorne Collection
This cast metal plate pairs perfectly with your satin nickel fixtures and cabinet hardware. The sleek metal design is ideal for both contemporary and traditional homes.
ADTP600RMHM1 | adorne Collection
The sofTap Wi-Fi Ready Master Dimmer is designed with an innovative micro-movement functionality, allowing you to turn lights on and off or dim them with a soft ""tap"" of the finger.
AAAL1G4 | adorne Collection
The Accent Nightlight is a stunning addition to any adorne product. It provides a wash of light below the wall plate, acting as a nightlight or as an accent light.