








17-in Dual-Purpose In-Wall Enclosure
ENP1700NA
On-Q
Bazaarvoice SAP Hybris Integration Version 2.8.1
$69.99 USD
The 17-in Dual-Purpose In-Wall Enclosure is engineered to provide storage of structured wiring and AV components. The ENP1700NA is constructed of Wi-Fi transparent material to manage wireless components and AV devices at point-of-use locations, like directly behind a TV or other media centers. It can also be used for structured wiring purposes, as smaller-sized options in the existing line of On-Q enhanced structured wiring enclosures. The ENP1700NA is compatible with devices like the Samsung One Connect Box, Apple TV, Roku, Amazon Fire TV, network switches, 3rd party structured wiring components and more. Includes a split cover, trim ring and drywall clips, allowing for both new construction and retrofit installations.
Out of stock on Legrand.us
- Send
- Save as PDF
-
FavoriteAdded to Favorites Go to favoritesRemove from favorites?
Features
- Designed for in-wall storage and distribution of structured wiring and AV components
- Can be placed behind most TV wall-mounts including SANUS premium TV mounts
- Compatible with devices like the Samsung One Connect Box, Apple TV, Roku, Amazon Fire TV, 3rd party structured wiring components and more
- Trim ring conceals drywall cut out for clean finish and smooth transition to wall surface
- Split cover is low profile and designed to snap into place. Split design supports removal and access to components even if partially covered
- Knockout configurations support conduit and in-wall wired connections, while a cable pass through on cover allows for outside cable connections
- Features (2) AC knockouts to accommodate a single gang junction box to power devices in enclosure
- Universal mounting grid maximizes compatibility with 3rd party devices without additional mounting brackets
- Features drywall clips to allow both retrofit and new construction installations
- UL Listed and constructed of Wi-Fi transparent ABS plastic to ensure uninterrupted performance of wireless devices
- Proudly made in the USA
Specifications
General Info
Product Line | On-Q | ||
Color | White | ||
UPC Number | 804428434146 | ||
Country Of Origin | United States | ||
Application Sector | Residential/Commercial | ||
Standard | RoHS, UL, cULus | ||
Type | Enclosure |
Additional Information
RoHS Conformant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. | |
Prop 65 Warning Required | Yes | ||
Prop 65 Warning Language | ⚠ WARNING: This product can expose you to Tetrabromobisphenol A, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. |
Listing Agencies / 3rd Party Agencies
cULus Listed | Yes |
Technical Information
Compatibility | Paintable with Rust-Oleum paint for plastic or equivalent | ||
Thickness | 0.1 in | ||
Frame | Injection-molded plastic | ||
Operating Temperature | 32 to 122 F | ||
Mounting | Consult the Factory for Mounting Recommendations | ||
Environmental Conditions | 0 to 93 (relative humidity, non-condensing) pct |
Resources
Cutsheet
Sell Sheet
Installation Instructions
Supporting Document
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Can a power outlet be installed on the top of the enclosure instead of the bottom? Would the enclosure support the weight?
You can install the enclosure in either orientation (outlets down or up). Assuming you make the cutout in the wall the correct size, there should be no concerns with doing this.
Date published: 2022-07-29