Low Voltage PIR Ceiling Occupancy Sensor, 500 sq ft, 24VDC

The maximum time delay setting for the Wattstopper CI-300 sensor is 30 minutes.

Installing a ceiling sensor on a wall could lead to several issues, mainly related to the sensor's functionality and effectiveness: 1. Detection Range: Ceiling sensors are typically designed to detect motion in a specific vertical or downward direction. Installing them on a wall could alter their detection field, potentially limiting their range or causing them to miss certain areas. 2. Field of View: The sensor may no longer have an optimal field of view if it's placed in a non-typical location. Ceiling-mounted sensors are often aimed to cover the largest area possible, whereas wall placement could lead to blind spots or decreased coverage. 3. Sensor Calibration: Many ceiling sensors are factory-calibrated for specific orientations. Mounting them on a wall could interfere with their preset configuration, causing them to behave unpredictably or perform less accurately. 4. Aesthetic/Structural Issues: Depending on the type of sensor, mounting it on a wall could also lead to aesthetic mismatches or structural challenges, such as incorrect wiring or a less sleek appearance. 5. Misuse of Technology: Ceiling sensors, like occupancy sensors, are intended to detect people moving under them. If you mount them on a wall, they may no longer function as intended, resulting in poor performance or false triggers. You might consider looking at a DT-200.

The CI-300 ceiling sensor is compatible with both Square and Octagonal J-Boxes. For detailed installation guidelines and specifics, please refer to the accompanying installation instructions.

The Wattstopper CI-305 is not exterior rated. For outdoor applications, I recommend looking into the FSP line of sensors, which are designed for outdoor use.

Hello Ivan, The CI-300 is not rated for damp/wet location. We do have some devices that are, for example the HB300W or FSP-201B and FSP-301B

Hello, The CI-305 will have the following time delay settings - Time Delay Adjustment 30 seconds to 30 minutes. Best Regards, Technical Support

Yes, both the CI-300 and CI-305 are both 24v sensors and are compatible with BZ-50 power packs.

Please reach out to our tech. support team for further assistance with this wiring issue. Legrand Technical Support: Phone: 1 800-879-8585, Option 3 then Option 1 Mon - Fri: 7am - 7pm CST (excluding holidays)