text.skipToContent text.skipToNavigation

Front of 0-10V PIR DROP MT SENSOR BLE LENS -GREY

Side of 0-10V PIR DROP MT SENSOR BLE 1 20-480V LENS -GREY

Underside of 0-10V PIR DROP MT SENSOR BLE LENS -GREY

Back of 0-10V PIR DROP MT SENSOR BLE LENS -GREY

0-10V PIR DROP MT SENSOR BLE 1 2-32V - 10FT LENS - GREY

FSP-301B-D-L2-G Wattstopper

The FSP-3x1B sensors provide continuous dimming light level control based on motion and/or daylight contribution. They control 0-10 VDC LED drivers or dimming ballasts, as well as non-dimming ballasts and, with an FSP-Lx Lens, are rated for wet and cold locations. All control parameters are adjustable via the iOS or Android Sensor Configuration App capable of storing and transmitting sensor profiles. The FSP-3x1B family is available in three configurations for mounting inside a fixture, to the outside of a fixture via a 1/2” knockout, or to a pole.

Color Gray

Sensor Mounting Height 8 ft

8 ft
20 ft
40 ft

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

Designed for LED fixtures and rated for extreme temperatures; options for box or pole mounting
Fully adjustable high and low dimmed light levels
Hold off setpoint with automatic calibration option for convenience and added energy savings
Continuous dimming & daylight harvesting for energy efficiency and energy code compliance
Adjustable via the iOS® or Android® Sensor Configuration App
IP66 rated with choice of lenses for wet and outdoor locations, and mounting heights from 8’ to 40’
Adjustable time delay and cutoff delay

Specifications

General Info

Color	Gray
Product Series	FSP-3x1B
Type	Sensor
Material	Polycarbonate
Finish	Glossy
Application Sector	Commercial
Product Line	Wattstopper
Country Of Origin	China
Features	Adjustable Time Delay, Flame Retardant, Impact Resistant, Light Level Sensor, Recyclable, Sensitivity Adjustment, UV Resistant
Included	Collar
Installation Location	Pole
Warranty Type	5-Year
Standard	UL, cUL, CE, IP66 Rated, RoHS, E101196
UPC Number	754182941018

Dimensions

Product Depth US	2.419 in
Product Height US	4.058 in
Product Volume US	57.111 cu in
Product Width US	5.818 in
Product Weight US	0.4984 lb

Additional Information

RoHS Compliant

Yes

This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.

Technical Information

Current Draw	15 mA
On Function	Auto On
Wire Connection Type	Flying Leads
Compatibility	Bluetooth
Has Battery	No
Indicator	PIR Detection LED
Indoor/Outdoor	Both
Input Voltage	12 to 32 VDC
Location Rating	Wet
Mounting Type	Drop Nipple, Fixture Embedded
Timer Type	Digital
Timer Duration	30 Seconds, 5-30 Minutes
Operating Temperature	-40°-167°F, -40°-75°C
Operating Temperature Max	167 °F
Operating Temperature Min	-40 °F
Operating Humidity	5-95% RH (Non-Condensing)
Sensing Range	44 ft diameter
Sensor Type	Daylight, Occupancy
Sensor Technology	Passive Infrared (PIR), Photosensor
Sensor Coverage Pattern	360 °
Sensor Mounting Height	8 ft
Storage Temperature	-40° - 176° F, -40° - 80° C

Resources

Recently Viewed

Front of Wattstopper DLM wired standard sensor switch with no faceplate

DLM Wired Standard Sensor Switch, 2B, Light Almond

BCS_WA_LMDW-220-LA | Wattstopper

LMDW-200 Series Wall Switch and Sensor devices are programmable, low voltage devices which provide both occupancy sensing and manual control of one or more loads from one or more locations.

View Details