text.skipToContent text.skipToNavigation

Discontinued - DLM 1-RELAY ROOM CONTROLLER 0- 10V 16A METERED

LMRC-111-16M Wattstopper

Replaced by LMRC-111-20M

LMRC-111-16M room controllers include one relay capable of switching a 16 amp load, a high-efficiency intelligent switching power supply and both Class 1 and Class 2 0-10 volt outputs for control of dimmable loads including compatible LED drivers or electronic ballasts. Room Controllers are the foundation of a Digital Lighting Management (DLM) system, and allow integration of occupancy sensors, daylighting controls and switches for energy-efficient control.

BAA No

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

Plenum-rated controllers with line voltage relay and 0–10 volt dimming output
Knockout mounting for easy installation; Class 1 and/or Class 2 connection for 0–10V wiring
Advanced real time metering of voltage and current (+/- 2% accuracy)
Plug n’ Go™ automatic configuration for quick installation and maximum energy efficiency
Store 16 scene preset levels for each load
Over-current protection: relay closes to prevent device damage in an over-current situation.
Supports energy saving manual-on, partial-on and dimming control strategies

Specifications

General Info

Color	White
Product Series	LMRC
Type	Room Controller
Finish	Glossy
Application Sector	Commercial
Product Line	Wattstopper
Country Of Origin	China
Replaced by Part Number	LMRC-111-20M
Installation Location	Ceiling
Warranty Type	5-Year
Standard	UL 924, UL 60730, UL 2043, cUL, FCC part 15, PEP, RoHS 2011/65/EC, ISO 14025:2010, ISO 14001
UPC Number	754182944231

Dimensions

Product Depth US	2.0 in
Product Height US	4.0 in
Product Volume US	44.55 cu in
Product Width US	4.0 in
Product Weight US	0.7 lb

Additional Information

RoHS Compliant

Yes

This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.

Technical Information

Current Draw	16 A
Number of Connections	4
Topology	Free Topology
Wire Connection Type	RJ-45, Terminal Block
Dimming Compatibility	0-10 V
Compatibility	DLM Wired
Has Battery	No
Indoor/Outdoor	Indoor
Input Voltage	120/277 VAC
Line Frequency	50 Hz, 60 Hz
Location Rating	Dry
Mounting Type	1/2 in Knockout, 4 in Deep J-Box
Number of Relays	1
Operating Temperature	0°-65°C, 32°-149°F
Operating Temperature Max	149 °F
Operating Temperature Min	32 °F
Operating Humidity	5-95% RH (Non-Condensing)
Output Voltage	24 VDC
Storage Temperature	23° - 176° F

Resources

Can this be used with 2 switch locations and multiple Ocupancy Sensors?

Asked by: JimP

Yes... A DLM Room Controller is capable of interfacing with multiple switches and sensors. Please note that the DLM device limit, inclusive of the controller, is 48 devices.

Answered by: Tier 1 Tech Support

Date published: 2024-07-29