The 24V InFusion Controller II possesses the required processor speed, RAM, and flash memory to meet the demands for delay-free control of large, complex systems. These requirements include control precision (where commands are completed instantaneously), real time feedback, a highly scalable system architecture, and programming for individual system personalization. Most buildings incorporate a number of controlled subsystems, including lighting, shades, HVAC, and more. The InFusion Controller provides seamless integration of these subsystems, enhancing the entire control experience.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Ample processor speed, RAM, and flash memory
- Remote programming and firmware updates through Design Center software
- Automatic backups of complete configuration each week to Micro SD card
- Email notification support for Yahoo, Gmail, Hotmail, and more
- Plug-and-play design for tool-free replacement of older InFusion systems
- 5 RS232 ports and 2 RS485 ports
- Ethernet enabled for connectivity, expansion, and integration
- Scalable up to seven enclosures per controller
- Tracks real and astronomical time
- Up to 120 low-voltage or 38 Equinox 40 stations, 120 wireless stations
Specifications
General Info
| Type | Controller | ||
| Application Sector | Commercial, Residential | ||
| Product Line | Vantage | ||
| Country Of Origin | China | ||
| Installation Location | Enclosure | ||
| Warranty Type | 5-Year | ||
| Standard | UL, cUL, CE | ||
| UPC Number | 804428068358 | ||
| Works With | Bond Bridge, Bond Bridge Pro, CoolAutomation HVAC Solutions, Forbes & Lomax Keypads, Josh.AI, Meljac Keypads, Somfy SDN |
Dimensions
| Product Depth US | 3.0 in | ||
| Product Height US | 6.62 in | ||
| Product Width US | 7.88 in | ||
| Product Weight US | 3.3 lb |
Technical Information
| Compatibility | InFusion | ||
| Connector 1 | RJ45 Female, USB-A Female | ||
| Connector 2 | Terminal Block Female | ||
| Environmental Conditions | 5 to 95% (relative humidity, non-condensing) | ||
| Frequency Rating | 50/60 Hz | ||
| Indoor/Outdoor | Indoor | ||
| Mounting | Post | ||
| Mounting Type | Snap-on Mount | ||
| Operating Temperature | 0°-40°C, 32°-104°F | ||
| Operating Temperature Max | 104 °F | ||
| Operating Temperature Min | 32 °F | ||
| Power Supply | Built-in | ||
| Security | Password Protected | ||
| Shape | Rectangular | ||
| Voltage | 120 to 240 V | ||
| Wattage | 200 W |
Resources
Installation Instructions
Supporting Document
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
How would I add occupancy / vacancy sensors to a old system? I have several offices / conference rooms that require sensors installed and programmed. They have a fusion Controller with wall controls for zone control in the rooms.
I want to know the price of the IC 36ll infusion controller and how long it will take to arrive in Venezuela.
Bazaarvoice SAP Hybris Integration Version 2.8.1