text.skipToContent text.skipToNavigation

Discontinued - SC-4G1I-6112-24 60 IVR 12''R 24''W

Choose from an extensive selection of metallic ladder trays with a variety of rung and bottom styles to suit your needs. Finishes include steel, 304L, and 316L stainless steel to meet the needs of any application.

Height 4.0 in

4.0 in

Width 24.0 in

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

Splices included
Rail heights range from 4 in, 5 in, and 6 in, and width sizes are available up to 36 in.

Specifications

General Info

Type	Vertical Elbows
Material	Carbon Steel
Finish	Hot Dipped Galvanized after Fabrication
Application Sector	Commercial, Industrial
Product Line	Cablofil
Country Of Origin	Mexico
Bottom Type	Solid Corrugated
UPC Number	800388362185

Dimensions

Product Depth US	11.75 in
Product Height US	16.875 in
Product Volume US	2.754 cu ft
Product Width US	24.0 in
Product Weight US	13.038 lb
Tray Height	4 in
Radius	12 in

Trade Programs

BAA

Yes

Resources

Cutsheet

SC-4G1I-6112-24 Cutsheet

pdf

Reviews

Questions & Answers

Is there no faceplate to support Keystone connectors?

Asked by: Anonymous

Hello. The EFB6 and EFB8 accept standard single gang device plates (2 3/4" x 4 1/2"). For the EFB10, the EFB10-6AB and (3) CM2-U2KEYA-WH adapters can be used for up to 6 keystones. The EFB6810BTBK is just the floor box cover. Thank you

Answered by: Wiremold Tech Support

Date published: 2025-08-05

Where can i buy the AL20GB612TR? I can't find it anywhere online - all i find are the 6" spacing and 3' or 5' lengths but not the 6' length with 12" spacing. Thanks, I live in Seattle, if available in any stores and not online

Asked by: Brandusa Bularca

Hello, Wiremold products, including aluminum Plugmold can be purchased through electrical distribution. Please click the link below to locate a distributor near you. https://www.legrand.us/where-to-buy/shop-local/?ps-sku=1036&utm_medium=distributor&utm_campaign=wtb&utm_term=wiremold

Answered by: Wiremold Tech Support

Date published: 2025-07-09

can this dim 0-10 volt drivers or is it just adjusting sensor to preset hi and low trim levels. I need to be able to dim from 100 down to about 5% if needed.

Asked by: mike

Hello, The FS-205 occupancy sensors turn lighting ON and OFF based on occupancy and ambient light levels. It does not have continues dimming

Answered by: Pass & Seymour Technical Support

Date published: 2025-01-03

what is the difference between Cablofil 6A-0012-99-S6 and 6A-0012-99-ZN

Asked by: Brion Arnold

The last two characters represent the hardware finish. -ZN indicates zinc-plated screws are included for attachment. -S6 indicates stainless steel screws are included for attachment.

Answered by: Cablofil Tech Support

Date published: 2023-02-02

30A and are way too small in diameter. I still need 6 fuse adaptors for 50A fuses (FRS-R-50) to fit in the 100A disconnects that I ordered previously, of which of these connectors would work?

Asked by: Amy